Ordering number: EN2064C Monolithic Linear IC LA6462M, 6462S High-Performance Dual Operational Amplifiers Overview Package Dimensions The LA6462 consists of two independent, internally phase compensated operational amplifiers. They feature low noise, high speed, wide band. Application areas include audio preamplifiers, active filters, and various electronic circuits. unit : mm 3032-MFP8 [LA6462M] Features . Built-in phase compensation circuit ^ 10 dB recommended) . (Gain Low noise: Equivalent input noise voltage . . 0.70 µV typ (Rg = 2.2 kΩ RIAA, DIN Audio). 0.50 µV typ (Rg = 300 Ω, IHF-A) High speed: Slew rate 4.0 V/µs typ. Wide band: Gain-bandwidth product 6 MHz typ. SANYO : MFP8 unit : mm 3017C-SIP9 [LA6462S] SANYO : SIP9 Specifications Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Maximum supply voltage VCC/VEE ±18 V Differential input voltage VID ±30 V Common-mode input voltage VIN ±15 V 300 mW 500 mW Allowable power dissipation Pd max LA6462M LA6462S Operating temperature Topr −20 to +75 °C Storage temperature Tstg −40 to +125 °C SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 53096HA(II)/4050YT/8077KI/3277KI,TS No. 2064-1/5 LA6462M, 6462S Operating Characteristics at Ta = 25°C, VCC = 15 V, VEE = −15 V Parameter Input offset voltage Input offset current Input bias current Common-mode input voltage Common-mode rejection ratio Voltage gain Maximum output voltage Slew rate Equivalent input noise voltage Current drain Power dissipation Gain-bandwidth product Symbol VIO IIO IB VICM CMRR VGO VO (1) VO (2) SR VNI (1) VNI (2) ICC Pd fT Conditions min RS = 10 kΩ RL ^ 2 kΩ, VO = ±10 V RL ^ 10 kΩ RL ^ 2 kΩ VG = 0, RL ^ 2 kΩ Rg = 2.2 kΩ, RIAA, DIN audio weight Rg = 300 Ω, IHF-A weight ±12 70 96 typ 0.3 5 200 ±14 90 110 ±14 ±13 4.0 0.70 0.50 6.0 180 6 max 6.0 200 500 Unit mV nA nA V dB dB V V V/µs µV µV mA mW MHz Test Circuits Oscilloscope 10 Vp-p rectangular wave No.2064-2/5 LA6462M, 6462S Unit (resistance: Ω, capacitance: F) Pin Assignments Top view Top view Equivalent Circuit No.2064-3/5 Open-loop voltage gain, VGO − dB Pd max − Ta Ambient temperature, Ta − °C Vop-p − RL Load resistance, RL − kΩ VO − VCC/VEE Output voltage, VO − V Input bias current, IB − mA Frequency, f − Hz IB − Ta Allowable power dissipation, Pd max − mW Ambient temperature, Ta − °C VGO − f Maximum output voltage amplifier, Vop-p − V Pd max − Ta Total harmonic distortion, THD − % Ambient temperature, Ta − °C THD − VO Output voltage, VO − Vvrms Equivalent input noise voltage, VNI − µV Allowable power dissipation, Pd max − mW LA6462M, 6462S Supply voltage, VCC/VEE − ±V VNI − Rg Input resistance, Rg − Ω No.2064-4/5 LA6462M, 6462S No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: 1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: 2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1996. Specifications and information herein are subject to change without notice. No.2064-5/5