Ordering number :EN2995A SB01W05C Shottky Barrier Diode (Twin Type · Cathode Common) 50V, 100mA Rectifier Applications Package Dimensions · High frequency rectification (switching regulators, converters, choppers). unit:mm 1169A [SB01W05C] Features · Low forward voltage (VF max=0.55V). · Fast reverse recorvery time (trr max=10ns). · Low switching noise. · Low leakage current and high reliability due to highly reliable planar structure. 1:Anode 2:No connection 3:Cathode SANYO:CP Specifications Absolute Maximum Ratings at Ta = 25˚C (Value per element) Parameter Repetitive Peak Reverse Voltage Symbol Conditions Ratings Unit VRRM VRSM 50 55 V Average Output Current IO 100 mA Surge Forward Current IFSM 2 A Junction Temperature Tj –55 to +125 ˚C Storage Temperature Tstg –55 to +125 ˚C Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1cycle V Electrical Characteristics at Ta = 25˚C (Value per element) Parameter Symbol Reverse Voltage VR Forward Voltage VF IR Reverse Current Conditions IR=50µA IF=100mA max Unit V VR=25V C VR=10V, f=1MHz Reverse Recorvery Time trr IF=IR=10mA, See specified Test Circuit 0.55 V 15 µA 4.4 Rthj-a(1) Rthj-a(2) typ 50 Interterminal Capacitance Thermal Resistance Ratings min Mounted on Cu-foild area of 16mm2×0.2mm on glass epoxy board pF 10 ns 560 ˚C/W 410 ˚C/W · Marking:AH trr Test Circuit Electrical Connection SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 33098HA (KT)/72696GI (KOTO)/1269TA, TS No.2995-1/2 SB01W05C No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 1998. Specifications and information herein are subject to change without notice. PS No.2995-2/2