SANYO SBFP420M

Ordering number : 0000000
SBFP420M
NPN Epitaxial Planar Silicon Transistor
SBFP420M
UHF to C Band Low-Noise
Amplifier Low Phase Noise Osc.Applications
Preliminary
•
•
•
•
Package Dimensions
Low noise : NF=1.1dB typ (f=1.8GHz).
High cut-off frequency : fT=18GHz typ (VCE=1V).
: fT=25GHz typ (VCE=3V).
Low operating voltage.
High gain : S21e2=17dB typ (f=1.8GHz).
unit : mm
0000
[SBFP420M]
0.25
Features
0.3
0.15
3
2
1.3
0.25
1
2.1
1.6
4
0.85
2.0
0.15
Specifications
1:Collector
2:Emitter
3:Base
4:Emitter
SANYO:MCPH4
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to- Base Voltage
VCBO
15
Collector-to-Emitter Voltage
VCEO
4.5
V
Emitter-to-Base Voltage
VEBO
1.5
V
35
mA
160
mW
Junction Temperature
IC
PC
Tj
150
°C
Storage Temperature
Tstg
--55 to +150
°C
Collector Current
Collector Dissipation
V
Electrical Characteristics at Ta=25°C
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Reverse Transfer Capacitance
Forward Transfer Gain
Noise Figure
Symbol
Conditions
ICBO
IEBO
VCB=5V, IE=0
VEB=1.5V, IC=0
hFE
fT(1)
fT(2)
VCE=4V, IC=20mA
VCE=1V, IC=10mA
VCE=3V, IC=30mA
Cre
VCB=2V, f=1MHz
VCE=2V, IC=5mA, f=1.8GHz
S21e2(1)
S21e2(2)
NF
VCE=2V, IC=20mA, f=1.8GHz
VCE=2V, IC=5mA, f=1.8GHz
Ratings
min
typ
50
max
Unit
200
nA
35
µA
150
13
18
18
25
0.15
12
14
GHz
GHz
0.3
pF
15
dB
17
dB
1.1
dB
Marking:MB
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
HD Seigi 010521 matumiya-1/2
SBFP420M
Electrical Connection (Top view)
4
3
1
2
1 : Collector
2 : Emitter
3 : Base
4 : Emitter
This product adopts a
high-frequency process.
Please be careful when
handling it beause it is
susceptible to static
electricity.
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of July, 2000. Specifications and information herein are subject
to change without notice.
HD Seigi 010521 matumiya-2/2