IMS-2SWWD-30 Vishay Dale Inductors Commercial, Subminiature, Molded, Shielded FEATURES • • • • • • Classification is Grade 1, Class A Ultra-reliable molded shielded inductor RoHS Inductance range is 0.10 µH to 10 000 µH COMPLIANT 0.136" [3.45 mm] diameter by 0.335" [8.51 mm] length Molded epoxy envelope Subminiature size for high density circuits and high inductance-to-size ratio • Utmost reliability, electrical performance and minimum coupling in high density packaging ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % on Q-Meter at specified frequency Dielectric Strength: 700 VRMS at sea level Operating Temperature: - 55 °C to + 105 °C Self-Resonant Frequency: Measured per MIL-PRF-15305 Q: Measured on a Q-Meter at specified frequency Rating: Maximum based on 1/3 watt dissipation MECHANICAL SPECIFICATIONS Terminal Strength: Meets five pound pull test; three 360° rotations in alternate directions per MIL-PRF-15305 (latest revision) DENSITY SPECIFICATIONS Weight: 0.50 gram maximum Shielding: Less than 3 % coupling with two units mounted side by side at 1000 cycles ENVIRONMENTAL SPECIFICATIONS Moisture: Meets requirements of MIL-PRF-15305 Vibration: High frequency, 10 Hz to 2000 Hz at 20 g ± 10 % maximum for 12 logarithmic swings each of 20 minute duration repeated for each of three mutually perpendicular planes Shock: 100 g, 6 ms DIMENSIONS in inches [millimeters] 1.438 ± 0.188 [36.52 ± 4.78] #24 0.020 ± 0.002 [0.508 ± 0.051] TCW 0.335 ± 0.010 [8.51 ± 0.254] 0.145 [3.68] Max. STANDARD ELECTRICAL SPECIFICATIONS IND. (µH) TOL. Q MIN. TEST FREQ. MIN. (MHz) SELF- RESONANT FREQ. MIN. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 IMS-2SWWD-3 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % 42 42 42 42 42 42 42 42 41 39 36 35 25 25 25 25 25 25 25 25 25 25 25 25 480 460 400 360 340 320 295 275 250 238 224 205 0.087 0.090 0.098 0.117 0.141 0.157 0.178 0.208 0.257 0.283 0.337 0.470 1038 1021 978 895 815 773 726 671 604 576 527 447 INCREMENTAL* CURRENT (mA) > 1650 > 1630 > 1550 > 1420 > 1330 > 1230 > 1140 > 1060 > 960 > 915 > 840 > 720 PHENOLIC MODEL * Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value Document Number: 34046 Revision: 10-Aug-06 For technical questions contact [email protected] www.vishay.com 19 IMS-2SWWD-30 Inductors, Commercial, Subminiature, Molded, Shielded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS TOL. Q MIN. TEST FREQ. MIN. (MHz) SELF- RESONANT FREQ. MIN. (MHz) DCR MAX. (Ohms) RATED DC CURRENT (mA) IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 IMS-2SWWD-30 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % ± 10 % 38 38 38 38 38 38 38 42 42 42 45 47 51 51 35 35 35 35 36 36 36 38 38 36 36 43 43 43 45 47 47 47 47 51 51 48 48 45 45 45 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 135 124 114 105 95 85 78 74 68 62 55 51 45 41 48 44 37 32 30 27 23 21 18.5 17.0 15.5 14.5 13.0 11.5 10.0 9.5 8.5 8.0 7.2 6.4 5.8 5.3 4.8 2.9 2.8 2.6 0.170 0.177 0.212 0.242 0.263 0.300 0.345 0.411 0.562 0.742 1.00 1.20 1.84 2.60 0.635 0.728 0.825 0.950 1.26 1.42 1.72 2.03 2.29 2.55 2.92 3.30 4.30 5.40 6.65 7.6 8.5 10.0 13.5 14.5 6.0 19.0 21.5 23 30 33 678 664 607 568 545 510 476 436 373 324 280 255 206 173 314 293 275 256 223 210 191 175 165 157 146 154 147 120 108 101 96 88 76 73 70 64 60 52 46 44 INCREMENTAL* CURRENT (mA) > 1180 > 1150 > 1050 > 990 > 950 > 880 > 820 > 755 > 650 > 565 > 485 > 440 > 335 > 300 200 175 160 155 150 145 140 130 120 115 100 80 68 64 60 58 56 54 52 50 48 47 45 40 35 32 IRON IND. (µH) FERRITE MODEL * Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value MARKING - Color coded per MIL-PRF-15305 (latest revision) www.vishay.com 20 For technical questions contact [email protected] Document Number: 34046 Revision: 10-Aug-06 IMS-2SWWD-30 Inductors, Commercial, Subminiature, Molded, Shielded Vishay Dale ORDERING INFORMATION IMS-2SWWD-30 1.0 µH 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M S 2 S MODEL Document Number: 34046 Revision: 10-Aug-06 W W D E R PACKAGE CODE 1 R 0 INDUCTANCE VALUE For technical questions contact [email protected] K INDUCTANCE TOLERANCE 3 0 SERIES www.vishay.com 21 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1