ST232 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS ■ ■ ■ ■ ■ ■ ■ ■ SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 5mA TRANSMITTER OUTPUT VOLTAGESWING (TYP): ±7.8V CONTROLLED OUTPUT SLEW RATE RECEIVER INPUT VOLTAGE RANGE: ±30V DATA RATE (TYP): 220Kbps OPERATING TEMPERATURE RANGE: -40 TO 85 oC, 0 TO 70 oC COMPATIBLE WITH MAX232 AND MAX202 DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in: Portable Computers, Low Power Modems, Interfaces Translation, Battery Powered RS-232 System, Multi-Drop RS-232 Networks. N (Plastic Package) D (Micro Package) W (Micro Package Large) T (TSSOP Package) ORDER CODES Type T emperature Ran ge ST232CN 0 to 70 oC DIP-16 25 parts per tube / 40 tube per box ST232BN -40 to 85 oC DIP-16 25 parts per tube / 40 tube per box ST232CD 0 to 70 oC SO-16 (Tube) 50 parts per tube / 20 tube per box o Packag e Comments ST232BD -40 to 85 C SO-16 (Tube) 50 parts per tube / 20 tube per box ST232CDR 0 to 70 oC SO-16 (Tape & Reel) 2500 parts per reel ST232BDR -40 to 85 oC SO-16 (Tape & Reel) 2500 parts per reel ST232CW 0 to 70 oC SO-16 Large (Tube) 49 parts per tube / 25 tube per box ST232BW -40 to 85 C o SO-16 Large (Tube) 49 parts per tube / 25 tube per box ST232CWR 0 to 70 C SO-16 Large (Tape & Reel) 1000 parts per reel ST232BWR -40 to 85 oC SO-16 Large (Tape & Reel) 1000 parts per reel only for samples o o ST232CT 0 to 70 C TSSOP16 (Tube) ST232BT -40 to 85 oC TSSOP16 (Tube) only for samples ST232CTR 0 to 70 oC TSSOP16 (Tape & Reel) 2500 parts per reel ST232BTR -40 to 85 oC TSSOP16 (Tape & Reel) 2500 parts per reel February 2001 1/11 ST232 PIN CONFIGURATION PIN DESCRIPTION PIN No SYMBOL 1 C1+ Positive Terminal for the first Charge Pump Capacitor NAME AND F UNCTION 2 V+ Doubled Voltage Terminal 3 C1- Negative Terminal for the first Charge Pump Capacitor 4 C2+ Positive Terminal for the second Charge Pump Capacitor 5 C2- Negative Terminal for the second Charge Pump Capacitor 6 V- Inverted Voltage Terminal Second Transmitter Output Voltage 7 T2OUT 8 R2IN 9 R2OUT Second Receiver Output Voltage 10 T2IN Second Transmitter Input Voltage 11 T1IN First Transmitter Input Voltage 12 R1OUT First Receiver Output Voltage Second Receiver Input Voltage First Receiver Input Voltage 13 R1IN 14 T1OUT First Transmitter Output Voltage 15 GND Ground 16 VCC Supply Voltage ABSOLUTE MAXIMUM RATINGS (Note 1) Symbol Parameter VCC Supply Voltage TIN Transmitter Input Voltage Range RIN Receiver Input Voltage Range TOUT Transmitter Output Voltage Range R OUT Receiver Output Voltage Range TSCTOUT Tstg Short Circuit Duration on TOUT Storage Temperature Range Value Unit -0.3 to 6 V -0.3 to (VCC + 0.3) V ±30 V (V+ + 0.3) to (V- - 0.3) V -0.3 to (VCC + 0.3) V infinite -65 to +150 o C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. Note1: No external supply can be applied toV+ terminal and V- terminal. 2/11 ST232 ELECTRICAL CHARACTERISTICS (C1 -C4 = 0.1µF, VCC = 5V ± 10% TA = -40 to 85 oC, unless otherwise specified. Typical Valus are referred to TA = 25 oC) Symb ol Parameter T est Cond it ion s Value Min. ISUPPLY VCC Power Supply Current No Load, TA = 25 oC Un it T yp. Max. 5 10 mA TRANSMITTER ELECTRICAL CHARACTERISTICS (C1 -C4 = 0.1µF, VCC = 5V ± 10%, TA = -40 to 85 oC, unless otherwise specified. Typical Valus are referred to TA = 25 oC) Symb ol Parameter T est Cond it ion s VTOUT Output Voltage Swing All Transmitter outputs are loaded with 3KΩ to GND TIN = 0 V Value Min. T yp. ±5 ±7.8 ITIL Logic Pull-Up Current VTIL Input Logic Threshold Low VTIH Input Logic Threshold High SRT Transition Slew Rate TA = 25 oC, VCC = 5 V, RL = 3 to 7 KΩ, CL= 50 to 2500 pF (Note 1) DR Data Rate (Note 2) 120 Transmitter Output Resistance VCC = V+ = V- = 0V VOUT = ± 2 V 300 Transmitter Output Short Circuit Current one TXOUT to GND R TOUT ISC 15 Un it Max. V 200 µA 0.8 V 30 V/µs 2 V 7 220 Kbits/s Ω ±10 ±60 mA Note 1: Measured from 3V to -3Vor from -3V to 3V. Note 2: One trasmitter output is loaded with R L = 3KΩ to7KΩ, CL = 50 to 1000pF RECEIVER ELECTRICAL CHARACTERISTICS (C1 -C4 = 0.1µF, VCC = 5V ± 10%, TA = -40 to 85 oC, unless otherwise specified. Typical Valus are referred to TA = 25 oC) Symb ol Parameter T est Cond it ion s Value Min. T yp. VRIN Receiver Input Voltage Operating Range -30 R RIN RS-232 Input Resistance TA = 25 oC, VCC = 5 V, VRIN = 5 V 3 5 VRIL RS-232 Input Logic Threshold Low TA = 25 oC, VCC = 5 V 0.8 1.2 VRIH RS-232 Input Logic Threshold High TA = 25 oC, VCC = 5 V RS-232 Input Hysteresis VCC = 5 V VROL TTL/CMOS Output Voltage Low IOUT = 3.2mA (to VCC) VROH TTL/CMOS Output Voltage High IOUT = 1mA (to GND) Propagation Delay Time CL=150pF (Note 1) VRIHYS tdR ISCR Receiver Output Short Circuit Current 1.7 0.2 3.5 0.5 Un it Max. 30 V 7 KΩ V 2.4 1 V 0.4 V 1 µs VCC-0.4 0.3 ±10 V V mA Note 1: RS-232 IN to TTL-CMOS OUT (from 50% to 50%) 3/11 ST232 APPLICATION CIRCUITS (note 1, note 2) +5V INPUT C3 + C5 1 + + C1 3 C14 C2+ + C2 5 16 Vcc C1+ C2- +5V TO +10V VOLTAGE DOUBLER +10V TO -10V VOLTAGE INVERTER 2 V+ V- 6 C4 +10V -10V + +5V 400K 11 T1IN T1 T1OUT 14 +5V TTL / CMOS INPUTS RS 232 OUTPUTS 400K 10 T2IN 12 R1OUT T2 R1 T2 OUT 7 R1IN 13 5K TTL / CMOS OUTPUTS 9 R2OUT R2 RS 232 INPUTS R2 IN 8 5K GND 15 Note 1: C1-4 capacitors can even be 1 µF ones. Note 2: C1-4 canbe common or biased capacitors. Capacitance Value (µF) 4/11 C1 C2 C3 C4 C5 0.1 0.1 0.1 0.1 0.1 ST232 Supply Current vs Temperature Data Rate vs Temperature Receiver Propagation Delay Driver Propagation Delay High Level Output Voltage Swing vs Temperature Low Level Output Voltage Swing vs Temperature 5/11 ST232 High Level Trasmitter Output Short Circuit Current vs Temperature Low Level Trasmitter Output Short Circuit Current vs Temperature High Level Receiver Output Short Circuit Current vs Temperature Low Level Receiver Output Short Circuit Current vs Temperature 6/11 ST232 Plastic DIP-16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 7/11 ST232 SO-16 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 e3 0.050 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8 (max.) P013H 8/11 ST232 SO16L MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 2.65 0.1 0.104 0.2 a2 MAX. 0.004 0.008 2.45 0.096 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.012 C 0.5 0.020 c1 45 (typ.) D 10.1 10.5 0.397 0.413 E 10.0 10.65 0.3.93 0.419 e 1.27 0.050 e3 8.89 0.350 F 7.4 7.6 0.291 0.300 L 0.5 1.27 0.020 0.050 M S 0.75 0.029 8 (max.) P013I 9/11 ST232 TSSOP16 MECHANICAL DATA mm DIM. MIN. inch TYP. A MAX. MIN. MAX. 1.1 0.433 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.85 0.9 0.95 0.335 0.354 0.374 b 0.19 0.30 0.0075 0.0118 c 0.09 0.20 0.0035 0.0079 D 4.9 5 5.1 0.193 0.197 0.201 E 6.25 6.4 6.5 0.246 0.252 0.256 E1 4.3 4.4 4.48 0.169 0.173 0.176 e 0.65 BSC 0.0256 BSC K 0o 4o 8o 0o 4o 8o L 0.50 0.60 0.70 0.020 0.024 0.028 A A2 A1 b e K c E1 PIN 1 IDENTIFICATION 1 L E D 10/11 TYP. ST232 Information furnished is believed to be accurate and reliable. However, STMicroelectronic s assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems withoutexpress written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2001 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com . 11/11