STG719 LOW VOLTAGE 4Ω SPDT SWITCH ■ ■ ■ ■ HIGH SPEED: tPD = 0.3 ns (TYP.) at VCC = 5V tPD = 0.4 ns (TYP.) at VCC = 3.0V LOW POWER DISSIPATION: ICC = 1 µA (MAX.) at TA = 85 oC LOW ”ON” RESISTANCE: RON = 4Ω (MAX. Ta=25oC) AT VCC = 5V RON = 6Ω (TYP.) AT VCC = 3.0V WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 1.8V to 5.5V SINGLE SUPPLY DESCRIPTION The STG719 is an high speed SPDT CMOS SWITCH frabricated in silicon gate C2MOS technology. It is designed to operate from 1.8V to 5.5V, making this device ideal for portable applications. It offers 4Ω ON-Resistance Max at SOT23-6L ORDER CODES PACKAGE SOT23-6L T UBE T& R STG719FTR 5V 25oC. Additional key features are fast switching speed (t ON=7ns, tOFF=4.5ns) and Low Power Consumption (<0.01µW Typ.). ESD immunity is higher than 1000V per Method 3015.7 of MIL-STD-883B. It’s avalable in the commercial temperature range. PIN CONNECTION AND IEC LOGIC SYMBOLS June 2000 1/7 STG719 LOGIC DIAGRAM PIN DESCRIPTION PIN No SYMBOL 1 IN NAME AND FUNCT ION 4, 6 S1, S2 5 D 3 GND Ground (0V) 2 VCC Positive Supply Voltage Control Independent Channel Common Channel TRUTH TABLE IN SWIT CH S1 SW ITCH S2 L ON OFF H OFF ON ABSOLUTE MAXIMUM RATINGS Symbol VCC Parameter Supply Voltage Value Unit -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V V IC Control Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode Current ± 20 mA IO DC Output Current ± 50 mA ± 50 mA ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec) -65 to +150 o 300 o C C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Unit Supply Voltage (note 1) 1.8 to 5.5 V VI Input Voltage 0 to VCC V V IC Control Input Voltage 0 to VCC V VO Output Voltage 0 to VCC Top Operating Temperature: VCC dt/dv Input Rise and Fall Time (note 2) 1) Truth Table guaranteed: 1.2V to 6V 2) VIN from 30% to70%V CC 2/7 Valu e -40 to +85 0 to 10 V o C ns/V STG719 DC SPECIFICATIONS Symb ol VIHC VILC R ON Parameter Test Co nditions Min. 3.0 (*) 2.0 2.0 (**) 2.4 2.4 Low Level Control Input Voltage 3.0 5.0 ON Resistance 3.0 (*) 5.0 ON Resistance Match Between Channels RFLATON ON Resistance Flatness Source OFF Leakage IIN ICC Control Input Leakage Current Quiescent Supply Current Min. Max. V 0.4 0.4 0.8 0.8 7 10 4 5 VS = 0 to V CC I S = 10 mA 3.0 (*) 5.0(**) 3.0 (*) 5.0(**) 3.0 (*) 5.0 Channel ON Leakage Current Max. (*) (**) ISON T yp. (**) 5.0 ISOFF Un it -40 to 85 o C High Level Control Input Voltage (**) ∆RON Valu e T A = 25 oC V CC (V) 3.0 (*) (**) 5.0 3.0 (*) 6 VS = 0 to V CC I S = 10 mA 0.1 0.4 0.1 0.4 VS = 0 to V CC I S = 10 mA 0.75 2.5 3.0 (*) ±0.01 ±0.25 ±0.35 ±0.01 ±0.25 ±0.35 V S =V D =1V to VCC -2.5V VI N = VI HC ±0.01 ±0.25 ±0.35 ±0.01 ±0.25 ±0.35 0.005 ±0.1 0.005 ±0.1 0.001 1 0.001 1 V I = VCC or GND 5.0(**) Ω Ω Ω V S = 1V or V CC V D = V CC or 1V V IN = V CC or G ND V I = VIH or VI L 5.0(**) V nA nA µA µA (*) Voltage range is 3.0V ± 0.3V (**) Voltage range is 5V ± 0.5V AC ELECTRICAL CHARACTERISTICS (CL = 35 pF, RL = 300Ω) Symb ol Parameter Test Co ndition V CC (V) tPD Delay Time tON ON Channel Time tOFF OFF Channel Time tD Break Before Make Time Delay (*) 3.0 5.0(**) 3.0(*) 5.0(**) 3.0(*) 5.0(**) 3.0(*) (**) 5.0 Value T A = 25 o C Min. Typ . Max. V S =3V square wave f=1MHz t r =t f =6ns VS VS VS VS VS = = = = = 0.4 0.3 2V 3V 2V 3V 2V 1 10 7 5.5 4.5 4 VS = 3V 1 4 C SOFF OFF Channel Capacitance 19 C SON ON Channel Capacitance 33 0.8 0.6 Un it -40 to 85 o C Min . Max. 1.2 1.0 16 11 7 6 ns ns ns ns pF pF (*) Voltage range is 3.0V ± 0.3V (**) Voltage range is 5V ± 0.5V 3/7 STG719 ANALOG SWITCH CHARACTERISTICS (CL = 5 pF, RL = 50Ω, GND = 0 V, TA = 25oC) Symb ol fMAX OIRR Parameter Test Co nditi on V CC (V) 3.0(*) 200 Frequency Response (Switch ON) 5.0(**) OFF Isolation (Switch OFF) 3.0(*) 3.0(*) fIN = 10MHz sine wave fIN = 1MHz sine wave -40 -74 5.0 5.0(**) (**) fIN = 10MHz sine wave fIN = 1MHz sine wave -40 -74 3.0(*) 3.0(*) 5.0(**) 5.0(**) fIN = 10MHz sine wave fIN = 1MHz sine wave fIN = 10MHz sine wave fIN = 1MHz sine wave -39 -52 -39 -52 Crosstalk (Between Channels) (*) Voltage range is 3.0V ± 0.3V (**) Voltage range is 5V ± 0.5V Bandwidth at -3dB TEST CIRCUITS ON RESISTANCE OFF LEAKAGE ON LEAKAGE OFF ISOLATION 4/7 Value 200 Un it MHz dB dB STG719 BANDWIDTH CHANNEL TO CHANNEL CROSSTALK SWITCHING TIMES BREAK BEFORE MAKE TIME DELAY 5/7 STG719 SOT23-6L MECHANICAL DATA mm DIM. MIN. 6/7 TYP. mils MAX. MIN. TYP. MAX. A 0.90 1.45 35.4 57.1 A1 0.00 0.15 0.0 5.9 A2 0.90 1.30 35.4 51.2 b 0.35 0.50 13.7 19.7 C 0.09 0.20 3.5 7.8 D 2.80 3.00 110.2 118.1 E 2.60 3.00 102.3 118.1 E1 1.50 1.75 59.0 68.8 L 0.35 0.55 13.7 21.6 e 0.95 37.4 e1 1.9 74.8 STG719 Information furnished is believed to be accurate and reliable. However, STMicroelectronic s assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems withoutexpress written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2000 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com . 7/7