VISHAY VSSA310S-E3-61T

VSSA310S
www.vishay.com
Vishay General Semiconductor
Surface Mount Trench MOS Barrier Schottky Rectifier
FEATURES
• Low profile package
TMBS
®
• Ideal for automated placement
• Trench MOS Schottky technology
• Low power losses, high efficiency
• Low forward voltage drop
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DO-214AC (SMA)
TYPICAL APPLICATIONS
For use in low voltage, high frequency inverters,
freewheeling, DC/DC converters, and polarity protection
applications.
PRIMARY CHARACTERISTICS
IF(AV)
3.0 A
VRRM
100 V
IFSM
60 A
EAS
24 mJ
VF at IF = 3.0 A
0.62 V
TJ max.
150 °C
MECHANICAL DATA
Case: DO-214AC (SMA)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
UNIT
V3B
Device marking code
Maximum repetitive peak reverse voltage
VSSA310S
VRRM
100
V
(1)
3.0
IF (2)
1.7
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
IFSM
60
A
Non-repetitive avalanche energy
at TJ = 25 °C, L = 60 mH
EAS
24
mJ
Peak repetitive reverse current at tp = 2 μs, 1 kHz,
TJ = 38 °C ± 2 °C
IRRM
1.0
A
Operating junction and storage temperature range
TJ, TSTG
- 40 to + 150
°C
Maximum DC forward current
IF
A
Notes
(1) Mounted on 10 mm x 10 mm pad areas, 1 oz. FR4 P.C.B.
(2) Free air, mounted on recommended copper pad area
Revision: 27-Mar-12
Document Number: 89138
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSSA310S
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
TEST CONDITIONS
PARAMETER
IR = 1.0 mA
Breakdown voltage
MAX.
UNIT
VBR
100 (minimum)
-
V
0.71
0.80
0.62
0.70
TA = 25 °C
1.0
-
μA
TA = 125 °C
0.95
-
mA
TA = 25 °C
VF (1)
TA = 125 °C
VR = 70 V
Reverse current
IR (2)
TA = 25 °C
VR = 100 V
Typical junction capacitance
TYP.
TA = 25 °C
IF = 3.0 A
Instantaneous forward voltage
SYMBOL
TA = 125 °C
CJ
4.0 V, 1 MHz
V
3.5
150
μA
2.2
15
mA
175
-
pF
Notes
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
VSSA310S
RJA (1)
135
RJM (2)
25
UNIT
°C/W
Notes
(1) Free air, mounted on recommended P.C.B. 1 oz. pad area. Thermal resistance R
JA - junction to ambient
(2) Units mounted on P.C.B. with 10 mm x 10 mm copper pad areas. R
JM - junction to mount
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
VSSA310S-E3/61T
0.064
61T
1800
7" diameter plastic tape and reel
VSSA310S-E3/5AT
0.064
5AT
7500
13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
2.6
D = 0.5
2.4
3.0
2.5
2.0
1.5
1.0
D = 0.8
D = 0.3
2.2
Average Power Loss (W)
Average Forward Rectified Current (A)
3.5
D = 0.2
2.0
1.8
1.6
D = 1.0
D = 0.1
1.4
1.2
1.0
T
0.8
0.6
0.4
0.5
TM Measured at Terminal
0.2
0
D = tp/T
tp
0
0
25
50
75
100
125
150
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
TM - Mount Temperature (°C)
Average Forward Current (A)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 2 - Forward Power Loss Characteristics
Revision: 27-Mar-12
Document Number: 89138
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSSA310S
www.vishay.com
Vishay General Semiconductor
1000
TA = 125 °C
1
TA = 100 °C
100
TA = 25 °C
0.1
10
0
0.2
0.4
0.6
1.0
0.8
1.2
0.1
1.4
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
1000
Transient Thermal Impedance (°C/W)
10
Instantaneous Reverse Current (mA)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TA = 150 °C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
10
TA = 150 °C
TA = 125 °C
1
TA = 100 °C
0.1
0.01
0.001
TA = 25 °C
20
30
40
50
60
70
80
90
100
10
1
0.01
0.0001
10
Junction to Ambient
100
0.1
1
10
100
t - Pulse Duration (s)
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AC (SMA)
Cathode Band
Mounting Pad Layout
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
MIN.
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 27-Mar-12
Document Number: 89138
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000