TS13003 High Voltage NPN Transistor TO-126 BVCEO = 400V BVCBO = 700V Ic = 1.5A VCE (SAT), = 0.8V @ Ic / Ib = 0.5A / 0.1A Pin assignment: 1. Emitter 2. Collector 3. Emitter Features Ordering Information High voltage. Part No. High speed switching Structure Packing Package Bulk TS13003CT TO-92 TS13003CK Silicon triple diffused type. TO-126 NPN silicon transistor Absolute Maximum Rating (Ta = 25 oC unless otherwise noted) Parameter Symbol Limit Unit Collector-Base Voltage VCBO 700V V Collector-Emitter Voltage VCEO 400V V Emitter-Base Voltage Collector Current DC Collector Power Dissipation TO-92 VEBO 9 V IC 1.5 A PD 0.6 TJ +150 o C - 55 to +150 o C Pulse 3 TO-126 Operating Junction Temperature Operating Junction and Storage Temperature Range Note: 1. Single pulse, Pw = 5mS, Duty <= 10% W 20 TSTG Electrical Characteristics Ta = 25 oC unless otherwise noted Parameter Conditions Symbol Min Typ Max Unit IC = 5mA, IB = 0 BVCBO 700 Collector-Emitter Breakdown Voltage IC = 5mA, IE = 0 BVCEO 400 V Emitter-Base Breakdown Voltage IE = 1mA, IC = 0 BVEBO 9 V Collector Cutoff Current VCB = 700V, IE = 0 ICBO 100 uA Emitter Cutoff Current VEB = 9V, IC = 0 IEBO 10 uA Collector-Emitter Saturation Voltage IC / IB = 1.5A / 0.5A VCE(SAT)1 3 V IC / IB = 0.5A / 0.1A VCE(SAT)2 0.5 DC Current Gain VCE = 2V, IC = 0.5A hFE 8 Frequency VCE = 10V, IC = 0.1A fT 4 Static Collector-Base Voltage V 40 MHz Output Capacitance VCB = 10V, f = 0.1MHz Cob 21 pF Turn On Time VCC = 125V, IC = 1A, tON 1.1 uS Storage Time IB1 = 0.2A, IB2 = - 0.2A, tSTG 4 uS Fall Time RL = 125ohm tf 0.7 uS Note : pulse test: pulse width <=5mS, duty cycle <=10% TS13003 1-3 2003/12 rev. A Electrical Characteristics Curve TS13003 Figure 1. Static Characteric Figure 2. DC Current Gain Figure 3. Vce(sat) v.s. Vbe(sat) Figure 4. Switching Time Figure 5. Safe Operating Area Figure 6. Power Derating 2-3 2003/12 rev. A TO-126 Mechanical Drawing A I TO-126 DIMENSION DIM B A C D H 1mm E MIN MAX 0.315(typ) 4.20 (typ) 0.165 (typ) 10.58 11.00 2.00 (typ) 0.417 0.433 0.079 (typ) E 12.00(typ) 0.472(typ) F G 2.50(typ) 0.74 0.78 0.098 (typ) 0.029 0.031 K J MIN MAX 8.00 (typ) B I J F INCHES C D H G MILLIMETERS 0.8 (typ) 2.56 0.38 3.00 0.50 0.031(typ) 0.101 0.015 1.1 (typ) 0.118 0.020 0.043 (typ) K TO-92 Mechanical Drawing A TO-92 DIMENSION DIM B E C H F MILLIMETERS INCHES A MIN 4.30 MAX 4.70 MIN 0.169 MAX 0.185 4.70 0.169 0.185 B 4.30 C D 14.30(typ) 0.43 0.49 0.563(typ) 0.017 0.019 E 2.19 2.81 0.086 0.111 F G 3.30 2.42 3.70 2.66 0.130 0.095 0.146 0.105 H 0.37 0.43 0.015 0.017 G D TS13003 3-3 2003/12 rev. A