VISHAY ETX0806-M3

VS-ETX0806-M3, VS-ETX0806FP-M3
Vishay Semiconductors
Hyperfast Rectifier, 8 A FRED Pt®
FEATURES
• Hyperfast recovery time, extremely low Qrr
• Low forward voltage drop
• 175 °C operating junction temperature
• Low leakage current
2L TO-220AC
• Fully isolated package (VINS = 2500 VRMS)
2L TO-220 FULL-PAK
• True 2 pin package
Base
cathode
2
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
• Designed and qualified according to JEDEC-JESD47
3
Anode
1
Cathode
VS-ETX0806-M3
2
Anode
1
Cathode
DESCRIPTION/APPLICATIONS
State of the art hyperfast recovery rectifiers designed with
optimized performance of forward voltage drop, hyperfast
recovery time, and soft recovery.
VS-ETX0806FP-M3
PRODUCT SUMMARY
Package
2L TO-220AC, 2L TO-220FP
IF(AV)
8A
VR
600 V
VF at IF
3.4 V
trr (typ.)
14 ns
TJ max.
175 °C
Diode variation
Single die
The planar structure and the platinum doped life time control
guarantee the best overall performance, ruggedness and
reliability characteristics.
These devices are intended for use in PFC boost stage in the
AC/DC section of SMPS, inverters or as freewheeling
diodes.
The extremely optimized stored charge and low recovery
current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Peak repetitive reverse voltage
VRRM
Average rectified forward current in DC
IF(AV)
FULL-PAK
Non-repetitive peak surge current
IFSM
Operating junction and storage temperatures
TEST CONDITIONS
VALUES
UNITS
600
V
TC = 142 °C
8
TC = 105 °C
TJ = 25 °C
A
80
TJ, TStg
- 65 to 175
°C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
Breakdown voltage,
blocking voltage
SYMBOL
VBR,
VR
TEST CONDITIONS
MIN.
TYP.
MAX.
600
-
-
IF = 8 A
-
2.5
3.4
IF = 8 A, TJ = 150 °C
-
1.5
2.0
VR = VR rated
-
0.02
30
TJ = 150 °C, VR = VR rated
-
21
150
IR = 100 μA
UNITS
V
Forward voltage
VF
Reverse leakage current
IR
Junction capacitance
CT
VR = 600 V
-
6
-
pF
Series inductance
LS
Measured lead to lead 5 mm from package body
-
8
-
nH
Document Number: 93546
Revision: 11-Mar-11
μA
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETX0806-M3, VS-ETX0806FP-M3
Hyperfast Rectifier, 8 A FRED Pt®
Vishay Semiconductors
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
Reverse recovery time
trr
TEST CONDITIONS
IRRM
Reverse recovery charge
Qrr
Reverse recovery time
trr
Peak recovery current
IRRM
Reverse recovery charge
TYP.
MAX.
IF = 1 A, dIF/dt = 100 A/μs, VR = 30 V
-
14
18
IF = 8 A, dIF/dt = 100 A/μs, VR = 30 V
-
15
24
TJ = 25 °C
-
17
-
-
33
-
TJ = 125 °C
Peak recovery current
MIN.
TJ = 25 °C
TJ = 125 °C
IF = 8 A
dIF/dt = 200 A/μs
VR = 390 V
-
2.6
-
-
4.3
-
TJ = 25 °C
-
22
-
TJ = 125 °C
-
77
-
-
26
-
TJ = 125 °C
Qrr
IF = 8 A
dIF/dt = 600 A/μs
VR = 390 V
UNITS
ns
A
nC
ns
-
11
-
A
-
150
-
nC
MIN.
TYP.
MAX.
UNITS
- 65
-
175
°C
-
2.0
2.6
-
4.6
5.5
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum junction and storage
temperature range
Thermal resistance,
junction to case
FULL-PAK
TEST CONDITIONS
TJ, TStg
RthJC
Thermal resistance,
junction to ambient
RthJA
Typical socket mount
-
-
70
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, flat, smooth and
greased
-
0.5
-
-
2
-
-
0.07
-
oz.
-
12
(10)
kgf · cm
(lbf · in)
Weight
6
(5)
Mounting torque
Marking device
www.vishay.com
2
Case style 2L TO-220AC
Case style 2L TO-220 FULL-PAK
°C/W
g
ETX0806
ETX0806FP
For technical questions within your region, please contact one of the following:
Document Number: 93546
[email protected], [email protected], [email protected]
Revision: 11-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETX0806-M3, VS-ETX0806FP-M3
Hyperfast Rectifier, 8 A FRED Pt®
Vishay Semiconductors
100
100
175°C
150°C
Reverse Current - IR (µA)
10
100°C
75°C
0.1
50°C
0.01
25°C
0.001
10
0.0001
0
100
200
300
400
500
600
Reverse Voltage - VR (V)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
100
Tj = 150°C
1
Junction Capacitance - CT (pF)
Instantaneous Forward Current - IF (A)
Tj = 175°C
125°C
1
Tj = 25°C
10
0.1
1
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
0
Forward Voltage Drop - VF (V)
100
200
300
400
500
600
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage
Fig. 1 - Typical Forward Voltage Drop Characteristics
Thermal Impedance ZthJC (°C/W)
10
D = 0.5
1
D = 0.2
D = 0.1
D = 0.05
0.1
D = 0.02
D = 0.01
0.01
1E-05
Single Pulse
(Thermal Resistance)
1E-04
1E-03
1E-02
1E-01
1E+00
t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 93546
Revision: 11-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETX0806-M3, VS-ETX0806FP-M3
Hyperfast Rectifier, 8 A FRED Pt®
Vishay Semiconductors
Thermal Impedance ZthJC (°C/W)
10
D = 0.5
D = 0.2
1
D = 0.1
D = 0.05
Single Pulse
(Thermal Resistance)
D = 0.02
D = 0.01
0.1
1E-05
1E-04
1E-03
1E-02
1E-01
1E+00
1E+01
1E+02
t1, Rectangular Pulse Duration (Seconds)
Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK)
180
Allowable Case Temperature (°C)
Allowable Case Temperature (°C)
180
160
DC
140
120
100
160
140
DC
120
100
80
60
0
2
4
6
8
10
0
Average Forward Current - IF(AV)(A)
2
4
6
8
10
Average Forward Current - IF(AV)(A)
Fig. 6 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 7 - Maximum Allowable Case Temperature vs.
Average Forward Current (FULL-PAK)
Average Power Loss ( Watts )
22
20
RMS Limit
18
16
14
12
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
DC
10
8
6
4
2
0
0
2
4
6
8
10
12
Average Forward Current - IF(AV) (A)
Fig. 8 - Forward Power Loss Characteristics
www.vishay.com
4
For technical questions within your region, please contact one of the following:
Document Number: 93546
[email protected], [email protected], [email protected]
Revision: 11-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETX0806-M3, VS-ETX0806FP-M3
Hyperfast Rectifier, 8 A FRED Pt®
Vishay Semiconductors
250
40
35
200
If = 8A, 125°C
30
If = 8A, 125°C
Qrr ( nC )
trr ( ns )
150
25
100
20
If = 8A, 25°C
If = 8A, 25°C
50
15
typical value
typical value
0
10
100
100
1000
di F /dt (A/µs )
Fig. 9 - Typical Reverse Recovery vs. dIF/dt
1000
di F /dt (A/µs )
Fig. 10 - Typical Stored Charge vs. dIF/dt
VR = 200 V
0.01 Ω
L = 70 μH
D.U.T.
dIF/dt
adjust
D
IRFP250
G
S
Fig. 11 - Reverse Recovery Parameter Test Circuit
(3)
trr
IF
ta
tb
0
Qrr
(2)
IRRM
(4)
0.5 IRRM
dI(rec)M/dt (5)
0.75 IRRM
(1) dIF/dt
(1) dIF/dt - rate of change of current
through zero crossing
(2) IRRM - peak reverse recovery current
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(4) Qrr - area under curve defined by trr
and IRRM
Qrr =
trr x IRRM
2
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 12 - Reverse Recovery Waveform and Definitions
Document Number: 93546
Revision: 11-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
5
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETX0806-M3, VS-ETX0806FP-M3
Hyperfast Rectifier, 8 A FRED Pt®
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
E
T
X
08
06
FP
-M3
1
2
3
4
5
6
7
8
1
-
Vishay Semiconductors product
2
-
Circuit configuration:
E = Single diode
3
-
T = TO-220
4
-
X = Hyperfast recovery time
5
-
Current code: 08 = 8 A
6
-
Voltage code: 06 = 600 V
7
-
None = TO-220
FP = FULL-PAK
8
-
Environmental digit:
-M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
QUANTITY PER TUBE
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
VS-ETX0806-M3
50
1000
Antistatic plastic tube
VS-ETX0806FP-M3
50
1000
Antistatic plastic tube
LINKS TO RELATED DOCUMENTS
Dimensions
Part marking information
www.vishay.com
6
2L TO-220AC
www.vishay.com/doc?95259
2L TO-220 FULL-PAK
www.vishay.com/doc?95260
2L TO-220AC
www.vishay.com/doc?95391
2L TO-220 FULL-PAK
www.vishay.com/doc?95392
For technical questions within your region, please contact one of the following:
Document Number: 93546
[email protected], [email protected], [email protected]
Revision: 11-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay High Power Products
True 2 Pin TO-220
DIMENSIONS in millimeters and inches
0.002"
0.05 mm
A
A
E
ØP
F
B
Q
H1
D
Term. 4
0.150" REF.
45°
Ø 2.0 mm REF.
L1
b1
L
b
c
60°
1
2
J1
e
SYMBOL
MILLIMETERS
INCHES
MIN.
MAX.
MIN.
MAX.
A
4.32
4.57
0.170
0.180
b
0.71
0.91
0.028
0.036
b1
1.15
1.39
0.045
0.055
c
0.36
0.53
0.014
0.021
D
14.99
15.49
0.590
0.610
E
10.04
10.41
0.395
0.410
e
5.08 BSC
0.200 BSC
F
1.22
1.37
0.048
0.054
H1
5.97
6.47
0.235
0.255
J1
2.54
2.79
0.100
0.110
L
13.47
13.97
0.530
0.550
(1)
3.31
3.81
0.130
0.150
ØP
3.79
3.88
0.149
0.153
Q
2.60
2.84
0.102
0.112
L1
Notes
(1) Lead dimension and finish uncontrolled in L
1
• These dimensions are within allowable dimensions of JEDEC TO-220AB rev. J outline dated 3-24-87
• Controling dimension: Inch
Document Number: 95259
Revision: 21-Jan-10
For technical questions concerning discrete products, contact: [email protected]
For technical questions concerning module products, contact: [email protected]
www.vishay.com
1
Outline Dimensions
Vishay High Power Products
True 2 Pin TO-220 FULL-PAK
DIMENSIONS in millimeters and inches
A
ØQ
F
E
Q1
H1
D
Q2
θ
L1
b1
L
b
C
e
J1
SYMBOL
MILLIMETERS
INCHES
MIN.
MAX.
MIN.
MAX.
A
4.53
4.93
0.178
0.194
b
0.71
0.91
0.028
0.036
b1
1.15
1.39
0.045
0.055
C
0.36
0.53
0.014
0.021
D
15.67
16.07
0.617
0.633
E
9.96
10.36
0.392
e
5.08 typical
0.408
0.200 typical
F
2.34
2.74
0.092
0.107
H1
6.50
6.90
0.256
0.272
J1
2.56
2.96
0.101
0.117
L
12.78
13.18
0.503
0.519
0.104
L1
2.23
2.63
0.088
ØQ
2.98
3.38
0.117
0.133
Q1
3.10
3.50
0.122
0.138
Q2
14.80
15.20
0.583
0.598
θ
0°
5°
0°
5°
Document Number: 95260
Revision: 22-Jan-10
For technical questions concerning discrete products, contact: [email protected]
For technical questions concerning module products, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1