LOW JITTER CRYSTAL OSCILLATOR ABLJO Pb RoHS Compliant FEATURES: • • • • • • • 9.2 x 14.8 x 5.5 mm SMT | | | | | | | | | | | | | | | APPLICATIONS: High "Q", 3rd Overtone Crystal Technology Ultra Low Jitter performance 0.10 ps Max. (12kHz to 20MHz) Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±40 ppm Max. All inclusive Stability (including Aging) over 10-years (17) Standard Frequencies between 80MHz & 200MHz 9x14mm RoHS Compliant SMT package • Avionics • COTS - Military communications • Low Phase Noise Signal Sources • High Definition TV • Test & Measurement • Ultra Low Jitter RF Communication Circuitry STANDARD SPECIFICATIONS Parameters RF Output Frequency Range Standard Available Frequencies Supply Voltage Current Drain 80MHz ~ 99.999MHz 100MHz ~ 149.999MHz 150MHz ~ 200MHz Waveform VOH VOL Symmetry Minimum Typical 80.00 Frequency Stability Over (-40º C to +85ºC) ALL effects, including Aging Storage Temperature Range Aging First Year 5-Years 10-Years Units 200.00 MHz 3.135 3.300 3.465 25.00 30.00 40.00 Volts mA mA mA LVCMOS 0.1*Vdd 0.1*Vdd 55 3.0 Volts Ω % ns -40 +85 ºC -40 ±25.00 ±40.00 +85 ppm ppm ºC ±2.00 ±5.00 ±7.00 ppm ppm ppm 45 50 Vdd=3.3V Phase Noise (100MHz Carrier) @ 10 Hz offset -70 dBc/Hz @ 100 Hz offset -105 dBc/Hz @ 1,000 Hz offset -135 dBc/Hz @ 10,000 Hz offset -144 -140 dBc/Hz @ 25,000 Hz offset -150 -145 dBc/Hz @ 100,000 Hz offset Integrated RMS Phase Jitter (12kHz ~ 20MHz BW) -155 -150 75 100 dBc/Hz Femto Seconds ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Notes 80.00MHz, 81.920MHz, 92.160MHz, 96MHz, 98.304MHz, 100MHz, 106.250MHz, 120MHz, 122.880MHz, 125MHz, 150MHz, 155.520MHz, 156.250MHz, 160MHz, 184.32MHz, 187.5MHz, and 200MHz Rise & Fall Times Operating Temperature Range Maximum 0.10 ps Max. Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.31.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW JITTER CRYSTAL OSCILLATOR ABLJO Pb RoHS Compliant 9.2 x 14.8 x 5.5 mm SMT | | | | | | | | | | | | | | | STANDARD SPECIFICATIONS - continued Minimum Parameters Typical Maximum Units 3.30 Volts Notes Electrical Frequency Adjustment 0.0 Control Voltage Range (Vc) ±45.00 Frequency Pull Range ppm Positive Frequency Pull Slope 10 Control Voltage Port Impedance 1.45 Center Control Voltage kΩ 1.65 Control Port Linearity 1.85 Volts ±10 % TYPICAL PHASE NOISE PERFORMANCE @ 156.25MHZ CARRIER OPTIONS AND PART IDENTIFICATION: ABLJO - Blank V ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Frequency Pull Option XO (Fixed Frequency VCXO (±45 ppm min.) - Frequency (MHz) - Blank T T2 Tape & Reel Options < 250 units on cut tape 1,000 units per reel 250 units per reel Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.31.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LOW JITTER CRYSTAL OSCILLATOR ABLJO Pb RoHS Compliant OUTLINE DIMENSIONS: 9.2 x 14.8 x 5.5 mm SMT | | | | | | | | | | | | | | | TAPE & REEL: (1,000) units per reel standard, (250) units per reel available (option # T2) Recommended Soldering Pattern Dimensions: inches (mm) REFLOW PROFILE: TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (TS Min.) Temperature Typical (TS Typ.) Temperature Max. (TS Max.) Time (tS) 150°C 175°C 200°C 60 ~ 180 seconds Ramp-up rate (TL to Tp ) Time Maintained Above: --Temperature (TL)/Time (TL) Peak Temperature (Tp) Target Peak Temperature (Tp Target) Time within 5°C of actual peak (tp) Ramp-down Rate Tune 25°C to Peak Temperature (t) 3°C/second max. 217°C/60 ~ 150 seconds 250°C max. for 10 seconds 250°C +0/-5°C 20 ~ 40 seconds 6°C/second max. 8 minutes max. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.31.11 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com