CK-COMPONENTS 7101J1ABE222

7000 Series
Miniature Toggle Switches
Features/Benefits
• Multi-pole and multi-position
• Wide variety of actuator and
termination options
Typical Applications
• Telecommunications
• Instrumentation
• Medical equipment
• Epoxy terminal-seal compatible
with bottom wash cleaning
• RoHS complaint models available
Models Available
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page G-16 for additional ratings.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
For materials see page F-4.
NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE: Specifications listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F–4 thru F–16. For additional options not shown in catalog, consult our Customer Service Center.
Switch Function
7101 SP On-None-On
7103 SP On-Off-On
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7305 3P Mom.-Off-Mom.
7308 3P On-None-Mom.
7401 4P On-None-On
7403 4P On-Off-On
7405 4P Mom.-Off-Mom.
7408 4P On-None-Mom.
7411 4P On-On-On
7413 4P On-On-Mom.
7415 4P Mom.-On-Mom.
Note: UL/CSA models available,
see pages F-4 & F-5.
Actuator
M .200" high
P3 Flatted, anti-rotation,
.450" high
S .420" high
T .687" high, 15/32 bushing
K2 Locking lever, .704" high
K9 Locking lever, .704" high
K12 Locking lever, .732" high
K19 Locking lever, .732" high
L .840" high
L1 .640" high
L1P Anti-rotation, .640" high
L2 .550" high
L2P Anti-rotation, .550" high
L3 Plastic .940” inch
L40 Lever handle without cap
L41 .531" high lever handle with cap
L42 .838" high lever handle with cap
MP Anti-rotation, .200" high
P1 Flatted, anti-rotation,
.840" high
P4 Flatted, anti-rotation,
.250" high
SP Anti-rotation, .420" high
T1 .487" high, 15/32 bushing
T1P Anti-rotation, .487" high,
15/32 bushing
T2P Flatted, anti-rotation,
.610” high, 15/32 bushing,
TP Anti-rotation, .687" high,
15/32 bushing
Bushing
D .280 high, keyway
H .296 high, flat
Y
.350 high, keyway
NONE No bushing
choice required
CW Splashproof
D8 .280" high, flat
D9 .280" high, keyway
H3 .315" high, keyway
H4 8mm high, keyway
Y1 .378" high, keyway
Y3 8.9mm high, keyway
Y4 .378" high, flat
Y9 .350" high, keyway
Contact Material
B Gold
Seal
P Gold, matte-tin E Epoxy
Q Silver
I Epoxy potted
S Silver, matte-tin
base
G Gold over silver
R Gold over silver, matte-tin
KXX Actuator Color/Finish
NONE Natural aluminum
2 Black anodized aluminum
3 Red anodized aluminum
7 Blue anodized aluminum
Bushing Finish
NONE Nickel on all
bushings (except D8,
satin chrome)
2 Black
.750" long, wire wrap
.964" long, wire wrap
.425" long, wire wrap
1.062" long, wire wrap
1.305" long, wire wrap
Quick connect
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–3
www.ck-components.com
F
Toggle
Terminations
Right angle, PC thru-hole
A
AV2 Vert. right angle, PC thru-hole
C
PC Thru-hole
V3 .460 high, V-bracket
Z
Solder lug
A2 Right angle, PC thru-hole
A3 Right angle, PC thru-hole
A4 Right angle, PC thru-hole
AW1 Right angle, extended, PC thru-hole
AW4 Right angle, extended, PC thru-hole
V2 .555" high, V-bracket
V4 .630" high, V-bracket
V6 .460" high, V-bracket
V7 .630" high, V-bracket
V8 .953" high, V-bracket
W
V9 1.150" high, V-bracket
V21 .555" high, snap-in V-bracket W1
V31 .460" high, snap-in V-bracket W3
V41 .630" high, snap-in V-bracket W4
W5
V71 .630" high, snap-in V-bracket
Z3
V81 .953" high, snap-in V-bracket
Actuator Color/Finish
NONE Bright chrome
2 Black
3 Red
S Satin chrome
7000 Series
Miniature Toggle Switches
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page F-15 for additional contact materials.
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See above for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
NOTE: Materials listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
SWITCH FUNCTION
SWITCH FUNCTION
NO.
POLES
SP
MODEL NO.
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
POS. 1
POS. 2
POS. 3
ON
NONE
ON
2-3
N/A
2-1
2-3
OPEN
2-1
UL/CSA**
MODEL
NO.
SCHEMATIC
7101
U11
7103
U13
ON
OFF
ON
7105
U15
MOM.
OFF
MOM.
7107
U17
ON
OFF
MOM.
7108
U18
ON
NONE
MOM.
2-3
N/A
2-1
7109
U19
NONE
ON
MOM.
N/A
2-3
2-1
SPDT
SPDT
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
Part number shown: 7101SYZBE
DP
7201
U21
ON
NONE
ON
7203
U23
ON
OFF
ON
7205
U25
MOM.
OFF
MOM.
7207
U27
ON
OFF
MOM.
7208
U28
ON
NONE
MOM.
7211 *
U211*
ON
ON
ON
7213*
U213*
ON
ON
MOM.
7215*
U215*
MOM.
ON
MOM.
2-3,5-6
N/A
2-1,5-4
2-3,5-6
OPEN
2-1,5-4
2-3,5-6
N/A
2-1,5-4
2-3,5-6
2-3,5-4
2-1,5-4
DPDT
DPDT
1/4-40 UNS-2A
KEYWAY
Toggle
F
Terminal Numbers
For Reference Only
Part number shown: 7201SYZQE
MOM. = Momentary
** U11–U415 model nos.
with all options when ordered with G, R, Q or S contact material.
* Wiring for 3-way switch, see Section N.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–4
www.ck-components.com
7000 Series
Miniature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
3P
MODEL NO.
POS. 2
CONNECTED TERMINALS
POS. 3
POS. 1
POS. 2
POS. 3
UL/CSA**
MODEL
NO.
7301
U31
7303
7305
SCHEMATIC
ON
NONE
U33
ON
OFF
ON
U35
MOM.
OFF
MOM.
7307
U37
ON
OFF
MOM.
7308
U38
ON
NONE
MOM.
ON
2-3,5-6,8-9
N/A
2-1,5-4,8-7
2-3,5-6,8-9
OPEN
2-1,5-4,8-7
2-3,5-6,8-9
N/A
2-1,5-4,8-7
3PDT
3PDT
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
Part number shown: 7301SYZQE
7401
U41
7403
U43
ON
OFF
ON
7405
U45
MOM.
OFF
7408
U48
ON
NONE
7411*
U411*
ON
ON
ON
7413*
U413*
ON
ON
MOM.
7415*
U415*
MOM.
ON
MOM.
ON
NONE
ON
2-3,5-6,8-9,11-12
N/A
2-1,5-4,8-7,11-10
MOM.
2-3,5-6,8-9,11-12
OPEN
2-1,5-4,8-7,11-10
MOM.
2-3,5-6,8-9,11-12
N/A
2-1,5-4,8-7,11-10
2-3,5-6,8-9,11-12
2-3,5-4,8-9,11-10
2-1,5-4,8-7,11-10
4P
4PDT
4PDT
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
Part number shown: 7401SYZQE
MOM. = Momentary
* Wiring for 3-way switch, see Section N.
** U11–U415 model nos.
with all options when ordered with G, Q, R or S contact material.
F
Toggle
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–5
www.ck-components.com
7000 Series
Miniature Toggle Switches
ACTUATOR FINISH
ACTUATOR
ACTUATOR
S
SP
M
MP
.420" HIGH 1
ANTIROTATION, .420" HIGH 2,3
L, L1, L2
L1P, L2P
.200" HIGH 1
ANTIROTATION, .200" HIGH 2,3
.840", .640", .550" HIGH 1
ANTIROTATION,
.840", .640", .550" HIGH 2,3
*
OPTION
CODE
*DIM. ‘A’
*
S actuator standard when ordered with
C, W-W5, Z & Z3 terminations.
Caps are available separately, see page F-16.
M actuator standard when ordered with
all terminations except C, W-W5, Z & Z3.
Caps are available separately, see page F-16.
P1
P3
FLATTED WITH ANTIROTATION, .840" HIGH 2,3
DIM ‘A’
L
.840 (21,34)
L1, L1P
.640 (16,26)
L2, L2P
.550 (13,97)
Caps are available separately, see page F-16.
P4
FLATTED WITH ANTIROTATION,
.450" HIGH 2,3
FLATTED WITH ANTIROTATION, .250" HIGH 2,3
*
*
*
Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.)
T
TP
T1
T1P
.687 (17,45) HIGH 1,2
ANTIROTATION, .687 (17,45) HIGH,
15/32 BUSHING 1,2,3
.687
(17,45)
FLATTED, ANTIROTATION, .610" HIGH,
15/32 BUSHING 1,2,3
ANTIROTATION, .487 (12,37) HIGH,
15/32 BUSHING 1,2,3
15/32-32 UNS-2A
.487
(12,37)
15/32-32 UNS-2A
T2P
.487 (12,37) HIGH 1,2
15/32-32 UNS-2A
.448
(11,38)
Bushing option code not required unless CW splashproof bushing ordered. TP & T1P
actuators not available with CW splashproof bushing. All TXX actuators not available on
single pole models with A-A4, AW1-AW4 terminations.
Toggle
F
1 L, L1, L2, M, S & TXX actuators not available
with Y1 bushing.
OPTION
CODE
2 L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not
available with D8 & H4 bushing.
NONE
3 Antirotation: Provides anti-‘push-in’ feature on
actuator.
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
Bushing option code not required. T2P actuator not available
with CW splashproof bushing or single pole models with
A-A4, AW1-AW4 terminations.
ACTUATOR FINISH
NOTE: Black hardware is supplied when either
black actuators or bushings are specified. For
additional hardware, see Section N.
BRIGHT CHROME-With Nickel Plated Bushing
2
BLACK
S
SATIN CHROME
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–6
www.ck-components.com
7000 Series
Miniature Toggle Switches
ACTUATOR FINISH/COLOR
ACTUATOR
ACTUATOR
K2
K9
K12
LOCKING LEVER, .704" HIGH
(threaded)
LOCKING LEVER, .732" HIGH
(threaded)
K19
LOCKING LEVER, .704" HIGH
(unthreaded)
LOCKING LEVER, .732" HIGH
(unthreaded)
OPTION
CODE
ACTUATOR CAP FINISH
NONE
NATURAL ALUMINUM–With Nickle Plated Bushing
2
BLACK ANODIZED ALUMINUM
3
RED ANODIZED ALUMINUM
7
BLUE ANODIZED ALUMINUM
Replaces K1, K18
Replaces K, K8
Locking Positions
NOTE: To prevent accidental actuation, toggle must be lifted
before being actuated. When released, toggle will lock in place.
Overtightening mounting nut may cause actuator to bind.
Locking levers supplied with bushing shown.
–01 Models
2 Position lock
L40
–03 & –11 Models
3 Position lock
–05, –09 & –15 Models
1 Position lock
LEVER HANDLE WITHOUT CAP
–07 & –13 Models
2 Position lock
L41
L42
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4810
No color choice required.
L3
Bushing option code not required unless CW splashproof
bushing ordered.
–08 Models
1 Position lock
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4811
Finish: Matte (L41 & L42).
PLASTIC .940” HIGH
Gloss Plastic
*
Chrome Finish
OPTION
CODE
PLASTIC ACTUATOR
COLORS
NONE
No Actuator Color (L40 option)
2
BLACK
3
RED
F
NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability,
order L40 actuator option and lever handles separately, see page F-16. L4X actuators not
available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–7
www.ck-components.com
Toggle
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
7000 Series
Miniature Toggle Switches
BUSHING FINISH
BUSHING
BUSHING
Y
Y9
.350" HIGH,
THREADED, KEYWAY
NONE
NO BUSHING
D
D8
.350" HIGH,
UNTHREADED,
KEYWAY
H
.280" HIGH,
THREADED, KEYWAY
D9
.296" HIGH, FLAT
THREADED, HIGH TORQUE 1,2
H3
.315" HIGH, KEYWAY
THREADED, HIGH
TORQUE 1,2
.280" HIGH, UNTHREADED,
FLAT 3
.280" HIGH, UNTHREADED,
KEYWAY
No bushing choice required
with KXX, TXX actuators.
(exception: Specify CW if
splashproof bushing desired).
D8
1/4-40 UNS-2A
D, D9
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
D9 bushing standard with all terminations
except C, W-W5, Z or Z3. Add .070 (1,78) to
all actuators lengths with D, D8 & D9 bushings.
Y bushing standard with C,
W-W5, Z or Z3 terminations.
H4
8mm HIGH, KEYWAY, THREADED,
METRIC HIGH TORQUE 1,2,3
Y1
.378" HIGH, KEYWAY, THREADED,
HIGH TORQUE 1,2,4
Y3
Subtract .020 (0,51) from all actuator
lengths for H3 bushing.
Y4
8.9mm HIGH, KEYWAY,
THREADED, METRIC
1/4-40 UNS-2A
CW
.378" HIGH, FLAT, THREADED,
HIGH TORQUE 1,2,5
1/4-40 UNS-2A
THREADED, SPLASHPROOF 1,2
For T & T1 actuators.
For actuators other than T & T1.
OPTION
CODE
NONE
2
15/32-32 UNS-2A
1/4-40 UNS-2A
BUSHING FINISH
NICKEL on all bushings
except ‘D8’ satin chrome.
BLACK
1 Will withstand 12 in.-lbs. of torque with no distortion.
2 CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models
with A4 terminations.
3 D8 & H4 bushings available only with L, L1, L2, M & S actuators.
4 Y1 bushing available only with LXP, MP, PX & SP actuators.
IP67 Degree of protection, totally protected against
dust, full-scale voltage protection, temporary immersion.
IP67 Degree of protection, totally protected
Internal actuator seal standard.
against dust, full-scale voltage protection,
External bushing seal available separately from APM
temporary immersion. Internal actuator seal
Hexseal, part # MFS-60064.
and external bushing seal washer standard.
5 Y4 bushing not available with L4X actuators.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with
threaded bushings. Black hardware is supplied when either black bushings or
actuators are specified. Optional mounting nut and locking ring styles and finishes
available, see Section N.
PANEL MOUNTING
1/4 INCH BUSHING
METRIC BUSHING
15/32 INCH BUSHING
Toggle
F
Without locking ring.
With standard locking ring.
With small locking ring.
Without locking ring. With locking ring.
Without locking ring.
With standard locking ring.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–8
www.ck-components.com
7000 Series
Miniature Toggle Switches
TERMINATIONS
Z
C
SOLDER LUG
PC THRU-HOLE
PC MOUNTING
.030 (0,76) Thk.
SPDT thru 4PDT
Z3
SPDT thru 4PDT
Not available with P, R or S contact materials.
W, W1, W3, W4, W5
QUICK CONNECT
Dim 'A'
.030 (0,76) Thk.
WIRE WRAP
OPTION
CODE
DIM ‘A’
W
.750 (19,05)
W1
.964 (24,48)
W3
.425 (10,80)
W4
1.062 (26,97)
W5
1.305 (33,15)
.030 (0,76) Thk.
SPDT thru 4PDT
A
Not available with P, R or S contact materials.
Mating quick connector available, order part
number 530100000, page F-16.
SPDT thru 4PDT
RIGHT ANGLE, PC THRU-HOLE
Actuator Shown
In Pos. 1
SECTION A-A
7101MD9ABE
Horizontal Actuation
Terminal Nos.
For Reference Only
SPDT
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Part No. Shown: 7101MHABE
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW1, AW4
RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
Dim 'A'
PC MOUNTING
OPTION
CODE
DIM ‘A’
AW1
.72 (18,3)
AW4
.83 (21,1)
F
Toggle
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–9
www.ck-components.com
7000 Series
Miniature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
7201MD9ABE
Actuator Shown
In Pos. 1
Horizontal Actuation
Terminals &
Support
SECTION A-A
DPDT
A3
AW1, AW4
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
PC MOUNTING
DIM 'A'
OPTION
CODE
DIM ‘A’
AW1
.40 (10,2)
AW4
.50 (12,7)
.33 (8,4)
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
A
RIGHT ANGLE, PC THRU-HOLE
7301MD9ABE
Horizontal Actuation
3PDT
AW4
Actuator Shown
In Pos. 1
Terminals &
Support
SECTION A-A
RIGHT ANGLE, EXTENDED, PC THRU-HOLE
PC MOUNTING
.18
(4,6)
Toggle
F
.33 TYP.
(8,4)
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–10
www.ck-components.com
7000 Series
Miniature Toggle Switches
TERMINATIONS
A2
RIGHT ANGLE, PC THRU-HOLE,
.156" PITCH
PC MOUNTING
7101MHA2BE
Terminals & Support
Horizontal Actuation
Actuator Shown In Pos. 1
SPDT
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Not available with TXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
A4
Part No. Shown: 7101MHA2BE
RIGHT ANGLE, PC THRU-HOLE
.156" PITCH
PC MOUNTING
7101MD9A4BE
Horizontal Actuation
SPDT
Actuator Shown In Pos. 1
Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings,
and I seal. Terminal bend radii and lead-in manufacturing option.
AV2
NOTE: The A4 option is available with any contact material and can be UL recognized and
CSA certified. The PC pattern must clear switch support legs.
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
7101MD9AV2BE
Horizontal Actuation
Actuator Shown In Pos. 1
SPDT
SECTION A-A
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
AV2
PC MOUNTING
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7201MD9AV2BE
Vertical Actuation
DPDT
F
Toggle
SECTION A-A
Actuator Shown In Pos. 1
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–11
www.ck-components.com
7000 Series
Miniature Toggle Switches
TERMINATIONS
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
7301MD9AV2BE
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
3PDT
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
7401MD9AV2BE
Vertical Actuation
4PDT
Actuator Shown In Pos. 1
SECTION A-A
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
V2, V6, V7, V8
VERTICAL MOUNT, V-BRACKET
V21, V71, V81
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7101MD9__BE
Snap-In
SPDT
Actuator Shown In Pos. 1
Not available with I seal option.
DIM ‘A’
V2, V21
.555 (14,10)
V6
.460 (11,68)
V7, V71
.630 (16,00)
V8, V81
.953 (24,21)
Toggle
F
OPTION
CODE
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–12
www.ck-components.com
7000 Series
Miniature Toggle Switches
TERMINATIONS
V2, V6, V7, V8
PC MOUNTING
VERTICAL MOUNT, V-BRACKET
V21, V61, V71, V81
VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
Snap-In
Actuator Shown In Pos. 1
OPTION
CODE
DIM ‘A’
7201MD9__BE
V2, V21
.555 (14,10)
DPDT
V6, V61
.460 (11,68)
V7, V71
.630 (16,00)
V8, V81
.953 (24,21)
Not available with I seal option.
V2, V7, V8
VERTICAL MOUNT, V-BRACKET
V21, V71, V81
PC MOUNTING
VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
7301MD9__BE
3PDT
Snap-In
Actuator Shown In Pos. 1
OPTION
CODE
DIM ‘A’
V2, V21
.555 (14,10)
V7, V71
.630 (16,00)
V8, V81
.953 (24,21)
Not available with I seal option.
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
Snap-In
OPTION
CODE
DIM ‘A’
V2, V21
.555 (14,10)
V7, V71
.630 (16,00)
V8, V81
.953 (24,21)
7401MD9__BE
4PDT
Not available with I seal option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–13
www.ck-components.com
Toggle
Actuator Shown In Pos. 1
F
7000 Series
Miniature Toggle Switches
TERMINATIONS
V3, V4, V9
V31, V41
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
Snap-In
7101MD9__BE
SPDT
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
V4, V41
.630 (16,00)
V9
1.150 (29,21)
Actuator Shown In Pos. 1
Not available with I seal option.
V3, V4, V9
V31, V41
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7201MD9__BE
DPDT
Snap-In
Actuator Shown In Pos. 1
OPTION
CODE
DIM ‘A’
V3, V31
.460 (11,68)
V4, V41
.630 (16,00)
V9
1.150 (29,21)
Not available with I seal option.
V4, V9
V41
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7301MD9__BE
3PDT
F
Toggle
OPTION
CODE
Snap-In
Actuator Shown In Pos. 1
DIM ‘A’
V4, V41
.630 (16,00)
V9
1.150 (29,21)
Not available with I seal option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–14
www.ck-components.com
7000 Series
Miniature Toggle Switches
TERMINATIONS
V4, V9 VERTICAL MOUNT, V-BRACKET
V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim 'A'
7401MD9__BE
4PDT
Snap-In
OPTION
CODE
Actuator Shown In Pos. 1
Not available with I seal option.
DIM ‘A’
V4, V41
.630 (16,00)
V9
1.150 (29,21)
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
B
GOLD 1
Q
SILVER 4,5
S
R
GOLD 1
MATTE-TIN 6
P
G
TERMINAL
PLATING
RATINGS
LOW LEVEL/
0.4 VA MAX. @ 20 V AC OR DC MAX.
DRY CIRCUIT
SILVER 5
MATTE-TIN 6
POWER
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
GOLD OVER
GOLD 3
LOW LEVEL/DRY
SILVER 2,3
MATTE-TIN 6
CIRCUIT OR POWER
0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC
OR 28 V DC; 2 AMPS @ 250 V AC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
U11-U415 model numbers
S, R, or Q contact material.
4
END CONTACTS: Coin silver, silver plated.
Q contact material standard with C, Z & Z3 terminations.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
P, S & R contact materials not available with Z & Z3 terminations.
6
TERMINALS: Copper alloy, with matte tin alloy nickel plate.
with all options when ordered with G,
B contact material standard with all terminations except C, Z & Z3.
F
Toggle
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–15
www.ck-components.com
7000 Series
Miniature Toggle Switches
SEAL
E
I
EPOXY SEAL
EPOXY POTTED BASE
NO.
POLES
Dim. 'A'
Compatible with “bottom-wash” PC board cleaning methods.
DIM ‘A’
SP
.410 (10,41)
DP
.440 (11,18)
3P
.505 (12,83)
4P
.505 (12,83)
Available with C, W-W5, Z & Z3 terminations only.
AVAILABLE HARDWARE
Cap
Cap
Cap
.383
(9,73)
PART NO.
896801000
896802000
896803000
PART NO.
PART NO.
763701000
763702000
763703000
WHITE
BLACK
RED
706201000
706202000
706203000
WHITE
BLACK
RED
WHITE
BLACK
RED
Material: Polyethylene
Finish: Matte
Material: Vinyl
Finish: Matte
Material: Vinyl
Finish: Matte
L41 Lever handle
L42 Lever handle
Fits Z3 Termination
female connector
.477
(12,12)
PART NO.
481001000
481002263
481003000
.777
(19,74)
481101000
481102263
481103000
WHITE
BLACK
RED
530100000
WHITE
BLACK
RED
Available in loose pieces.
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
759D02000 Sealing Boot
703D02000 Sealing Boot
704D02000 Sealing Boot
.657 (16,7)
.524 (13,3)
1/4-40 uns-2A nut
NOTE: For use with S actuator style when combined
with D, H, H3, Y, and Y4 bushings
Other colors available, consult
Customer Service Center.
16 [0.630]
ø 2 [0.079]
ø .331 (8,4)
.464 (11,79)
.945 (24,0)
.658 (16,7)
F
NOTE: Additional nuts, locking rings
and lockwashers available
separately, see Section N.
PART NO.
PART NO.
.331 (8,4)
Toggle
.312
(7,92)
.687
(17,45)
15/32-32 NS-2A
NOTE: For use with T and TP style actuators.
15/32-32, NS-2A
NOTE: For use with T, TP and T2P style actuators. Can not
be used for Switch Functions: 7103, 7203, 7303, 7403,
7107, 7207, 7307, and 7407.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–16
www.ck-components.com