AP Series Industrial Pushbutton Switch Pushbutton A Features/Benefits • IP67 sealed • 1,000,000 life cycle • Illumination / non-illumination • Multiple colored caps • Threaded or snap-in mounting • Caps available separately • RoHS compliant ! NEW Typical Applications • Harsh environments • Off-Road • Industrial • Medical • Transportation • Joystick control modules • Gaming • Military Specifications Materials FUNCTION: SPST Momentary, double break CONTACT ARRANGEMENT: N.O. MOUNTING TYPE: Snap-in (panel front) or threaded (nut with locking washer and panel gasket) HOUSING: PBT BASE: PBT CAP: PBT ACTUATOR: Illuminated: Clear polycarbonate Non-illuminated: PBT INTERNAL SEAL: Silicone rubber TERMINALS: Copper alloy, gold over silver plating MOVABLE CONTACT: Copper alloy, gold over silver plating TERMINAL SEAL: Epoxy Mechanical OPERATING LIFE: 1,000,000 cycles TOTAL TRAVEL: 2.1 ± 0.2 mm OPERATING POINT 1.55 ± 0.25 mm OVER TRAVEL: 0.6 min. OPERATING FORCE: 4N ± 1N standard configuration; other force Operating Environment option 2N ± 0.5N OPERATING TEMPERATURE: -40˚C to 85˚C (+105˚C non-illuminated) VIBRATION: 10-500 Hz 10g Max ESD PROTECTION: 20 KV min. SHOCK: 60g 11ms sawtooth wave Electrical CONTACT RATING: 200mA @ 24 V DC resistive (500,000 cycles) 100mA @ 50 V DC resistive (500,000 cycles) 400mA @ 32 V AC resistive (500,000 cycles) 125mA @ 125 V AC resistive (1,000,000 cycles) DIELECTRIC STRENGTH: 1000 V AC min. INSULATION RESISTANCE: 1 G Ω @ 500 VDC INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads) BOUNCE TIME: <5 ms Process Environment SEALING: IP67 NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. A P B E Designation AP AP Series Terminal Seal Epoxy E All models are epoxy sealed Operating Force 2 Newtons 2 4 4 Newtons Contact Material B Gold Actuator Style D Dome / Convex C Concave E Extended Dome N None Please contact Customer Service for additional colors and paint / laser etched button options. Actuator Color No Cap 0 2 Black 3 Red 4 Orange 5 Yellow 6 Green Illumination 00 No LED* 01 Super White 02 Bi-color; Red (Green) 03 Red 05 Amber 06 Green 07 Super Blue 08 Bi-color; Amber (Green) * No LED available in short body only Termination Z Solder Lug W 12” Wire Leads 22 AWG C**** PC Terminals Bushing Style** S Snap-in plastic T*** Threaded plastic Metal threaded bushing available, contact Customer Service T bushing style includes: 1 lockwasher, 1 hex nut & 1 *** panel seal washer **** Illumination not available with PC Terminals Contact Customer Service for additional hardware options. ** Specifications and dimensions subject to change A-110 www.ck-components.com ! AP Series NEW Industrial Pushbutton Switch STANDARD VIEW A ELECTRICAL SCHEMATIC 10,90 [ 0.429 ] ø 12,35 [0.486] ø 17,40 [0.685] 4 4,20 [ 0.165 ] 1,50 [ 0.059 ] 1 3,90 [ 0.154 ] 8,80 [ 0.346 ] 5,45 [ 0.215 ] 7,74 [ 0.305 ] 2 4 3 2 1 3 SPST-NO SEE SCHEMATIC 4,50 [ 0.177 ] OPERATING FORCE OPTION CODE OPERATING FORCE 2 4 2 N, 200 g 4 N, 400 g ACTUATOR STYLE D E DOME / CONVEX C EXTENDED DOME 3,54 TYP [ 0.140 ] 0,65 [ 0.026 ] 3,54 TYP [ 0.140 ] 8,19 TYP [ 0.323 ] 7,74 TYP [ 0.305 ] 7,74 TYP [ 0.305 ] 1,64 TYP [ 0.065 ] CONCAVE 1,64 TYP [ 0.065 ] 3,99 TYP [ 0.157 ] 2,09 TYP [ 0.082 ] DOWN POSITION ACTUATOR COLOR OPTION CODE ACTUATOR COLOR 0 2 3 4 5 6 No Cap Black Red Orange Yellow Green For additional colors please contact Customer Service. Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A-111 www.ck-components.com Pushbutton 28,00 [ 1.102 ] AP Series EW! N Industrial Pushbutton Switch ILLUMINATION Pushbutton A OPTION CODE ILLUMINATION TYPE TYPICAL INTENSITY* MIN MAX PEAK WAVELENGTH (mcd) Vf Forward Voltage (nm) 00 Model without illumination 01 LED Super White 4,000 5,000 02 LED Bi-Color – Red (Green) 10 20 N/A N/A 3.5 N/A 2.0 635/565 03 LED Red 4 8 700 2.0 05 LED Amber 35 50 610 2.0 06 LED Green 35 50 565 2.0 07 LED Super Blue 800 1,500 470 3.8 08 LED Bi-Color – Amber (Green) 10 10 585/565 2.0 + Anode - Cathode *LED FORWARD CURRENT: 20 mA LED FORWARD VOLTAGE: see chart above LED REVERSE VOLTAGE: 5.0 V MAX * For information on specific and custom LED, please contact Customer Service. NOTE: 4 3 For bi-color LED’s the polarity must be reversed to alternate the color BUSHING STYLE S SNAP-IN 28,00 [ 1.102 ] 24,00 [ 0.945 ] 20,25 [ 0.797 ] 7,74 [ 0.305 ] 16,25 [ 0.640 ] 7,75 [ 0.305 ] SNAP-IN NO ILLUMINATION SNAP-IN WITH ILLUMINATION 1,50 [ 0.059 ] T 1,50 [ 0.059 ] THREADED PLASTIC M13 X 1.25-6g THREADED WITH ILLUMINATION M13 X 1.25-6g THREADED NO ILLUMINATION 0,85 [ 0.033 ] 0,85 [ 0.033 ] PANEL CUTOUT øA B PANEL THICKNESS 1 mm [0.039 in] 2 mm [0.079 in] 3 mm [0.118 in] THREADED BODY MIN PANEL THICKNESS 1 mm DIM A (± 0.05 mm) 13.70 mm [0.539 in] 13.80 mm [0.539 in] 13.90 mm [0.547 in] 13.70 mm [0.539 in] DIM B (± 0.05 mm) 13.00 mm [0.512 in] 13.00 mm [0.512 in] 13.10 mm [0.516 in] 13.00 mm [0.512 in] A 0.1mm min. chamfer on the leading edge of the mounting hole is recommended for snap-in version. A-112 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com ! AP Series NEW Industrial Pushbutton Switch TERMINATION SOLDER LUG Pushbutton Z A LED TERMINAL CATHODE (-) 3,90 [0.154] 0,75 TYP [0.030] LED TERMINAL ANODE (+) 0,50 TYP [0.020] 2,83 TYP [0.111] 6,44 TYP [0.254] 2,75 [0.108] 2,83 TYP [0.111] 0,50 TYP [0.020] LED TERMINAL ANODE (+) 2,04 TYP [0.080] LED TERMINAL CATHODE (-) C 5,65 TYP [0.222] PC TERMINALS **** Illumination not available with PC Terminals 2,50 TYP [0.098] 0,50 [0.020] 0,70 [0.028] 5,65 TYP [0.222] 5,70 [0.224] 2X ø 1,00 [0.039] PCB HOLE PATTERN BOARD VIEW W 34,78 TYP [1.369] 12” WIRE LEADS 22 AWG 28,44 TYP [1.120] 27,04 TYP [1.065] 20,69 TYP [0.815] WIRE LEADS WITH POTTED BASE, SNAP-IN NO ILLUMINATION WIRE LEADS WITH POTTED BASE, SNAP-IN ILLUMINATION ø 11,11 [0.437] 304,81 [12.000] WIRELEADS 22 AWG STD ø 11,11 [0.437] 304,81 [12.000] WIRELEADS 22 AWG STD WIRE LEADS WITH POTTED BASE, THREADED NO ILLUMINATION WIRE LEADS WITH POTTED BASE, THREADED ILLUMINATION 304,81 [12.000] WIRELEADS 22 AWG STD 304,81 [12.000] WIRELEADS 22 AWG STD Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A-113 www.ck-components.com AP Series EW! N Industrial Pushbutton Switch CONTACT MATERIAL Pushbutton A B OPTION CODE GOLD CONTACT MATERIAL Gold B TERMINAL SEAL E EPOXY All models are epoxy sealed HARDWARE LOCK WASHER Part Number 647D00000 2.50 HEX NUT Part number 515D00000 ø17.25 17.32 REF ø15.00 M13 X 1.25-6H 13.82 0.77 15.00 PANEL SEAL Part Number 655D00000 See Detail A 4X 0.13 0.30 Detail A Scale 15:1 0.56 REF 4X R 0.13 REF 2 X ø 14.60 2 X ø 16.30 ø 17.00 ø 13.80 A A Caps available on next page Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A-114 www.ck-components.com AP Series ! NEW Industrial Pushbutton Switch AVAILABLE CAPS X Cap Actuator Style Cap Color Pushbutton 481 A XX 00X Hole / No Hole OPTION CAP COLOR PART NUMBER HOLE 02 BLACK 481DXX000 NO 03 RED 481DXX001 YES DOME 04 ORANGE 481CXX000 NO CONCAVE 05 YELLOW 481CXX001 YES 06 GREEN 481EXX000 NO EXTENDED DOME 481EXX001 YES EXTENDED DOME ACTUATOR STYLE DOME CONCAVE ø 12.35 D ø 3.00 THRU HOLE DOME 6.25 6.10 ø 12.35 C ø 3.00 THRU HOLE CONCAVE 0.65 0.61 6.69 6.69 E EXTENDED DOME ø12.35 ø 3.00 THRU HOLE 6.15 6.10 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A-115 www.ck-components.com