CK-COMPONENTS ZMS

ZMS Series
Subminiature Snap-acting Switches (Dust Proof)
Features/Benefits
• Reliable snap-acting mechanism
• Long electrical and mechanical life
• Compact size—Ideal when space is limited
• Various PCB terminals and actuators
• RoHS compatible
• IP67 on some models
Typical Applications
• PCB detection switch
• Communication devices
• Testing equipment
• Security/Alarm systems
• Consumer electronics
14
Models Available
Specifications
Materials
CONTACT RATING: [email protected] 125 V AC/ [email protected] 12 V DC, 10 [email protected] 12 V DC.
ELECTRICAL LIFE: 300,000 cycles @ 10mA 12VDC
100,000 cycles @ 3A 12 VDC
6,000 cycles @ 3A 125 VAC
MECHANICAL LIFE: 500,000 cycles
INSULATION RESISTANCE: 100 M ohm min.
DIELECTRIC STRENGTH: 500 Vrms.
OPERATING TEMPERATURE: –40ºC to 85ºC.
OPERATING FORCE: 80 or 130 grams.
CASE: Nylon
COVER/ACTUATOR: PBT
MOVABLE CONTACTS: Silver or gold plated.
STATIONARY CONTACTS: Silver or gold plated.
TERMINALS: Brass, tin plated.
LEVER: Stainless steel
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
J
* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max.
@ 20 V AC or DC max.
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-40 and J-42. For additional options not shown in catalog, consult Customer Service Center.
Z M S
Series
ZMS SP, Mom.
Over Travel
H High Travel
L Low Travel
Electrical Rating
00 10 mA @ 12 V DC
03 3A 125 V AC
3A 12 V DC
Operating Force
130 130 grams / 4.59
Actuator
P00 Pin plunger
T10 .25 lever
Terminations
T11 .28 simulated roller P PC Thru-hole
L Left form, PC Thru-hole
R Right form, PC Thru-hole
S Solder type
J Wire leads out bottom *
K Wire leads out right side *
W Wire leads out left side * Mounting Styles
S Std (No support post)
L Support post left
* Standard Wire: 20 AWG UL 1007
R Support post right
M Mounting hole **
Circuitry
C SPDT
W SPST N.C. ***
Y SPST N.O. ***
Available options - must specify
22AWG UL1430
24AWG UL1061
26AWG UL1330
** “M” mounting style see page K-43 and K-44 for data and termination style
*** Only available with “J” Termination option
Dimensions are shown: mm (inch)
Specifications and dimensions subject to change
J–41
www.ck-components.com
Snap-acting
Build-A-Switch
ZMS Series
Subminiature Snap-acting Switches
SERIES
ZMSH
Z M S
HIGH OVER TRAVEL
Switch option shown: ZMSH00P00SSC
14,7
( .579 )
PT
12,2
( .480 )
1,7
( .067 )
8,1
7,5
( .295 ) ( .319 )
NC
NO
0,5
( .020 )
2,8
( .110 )
4,13
( .16 )
14,7
( .579 )
LOW OVER TRAVEL
Switch option shown: ZMSL00P00PSC
5,4
( .213 )
Ø2
( .079 )
PT
12,2
( .480 )
9,05 OP
7,5 ( .356 )
( .295 )
NC
NO
FP
COM
J
0,6 ±0,1
( .024 ±.003 )
Snap-acting
FP
COM
2,5
( .10 )
4,13
(.163 )
ZMSL
OP
ø2
( .079 )
5,08
( .200 )
2,5
( .098 )
0,5 ±0,05
( .020 ±.001 )
2,8
( .110 )
5,4
( .213 )
5,08
( .200 )
ELECTRICAL RATING
CONTACT MATERIAL
OPTION
CODE
MOVABLE CONTACT
STATIONARY CONTACT
ELECTRICAL RATING
00
Silver plated
Silver plated
0.1 AMP @ 30 V DC
03*
Fine Silver
Fine silver
3 AMPS @ 125 V AC
* Note: See Technical Data in section N of this catalog for RoHS compliant and compatible definition and specifications.
Model
with option “S” (solder type) only.
Consult Customer Service center for availability and delivery of nonstandard ratings.
*Electrical rating 03A is not available with Operating Force rating of 080.
OPERATING FORCE
OPTION CODE
BASIC SWITCH
OPERATING FORCE
(OZ./GRAMS)
130
4.59
130
Third Angle
Projection
Dimensions are shown: mm (inch)
Specifications and dimensions subject to change
J–42
www.ck-components.com
ZMS Series
Subminiature Snap-acting Switches (Dust Proof)
ACTUATOR
P00
T10
PIN PLUNGER
14,7
( .579 )
12,2
( .480 )
LEVER
18,6
( .7323 )
14,7
( .579 )
12,2
( .480 )
PT
OP
T11
.25 LEVER
14,7
( .5787 )
PT
PT
FP OP
OP FP
FP
12,2
( .4803 )
9,05
( .3563 )
approved
SWITCH CHARACTERISTICS
Maximum Operate
Force (grams/oz.)
Minimum Release
Force (grams/oz.)
Free Position
Max
Maximum
Pre-travel
P00
130
4.59
13
0.45
.472
(12)
0.032
(0,8)
T10
195
6.88
55
1.93
.604
(15.35)
T11
160
5.64
45
1.58
.726
(18.45)
T10
PIN PLUNGER
14,7
( .579 )
OP
Gray
NC
Blue
(NO)
Maximum
Differential
Minimum
Overtravel
.415 ± .012
(10.55 ± .3)
.012
(0.3)
0.031
(0,8)
0.152
(3.85)
.440 ± .020
(11.2 ±.5)
0.020
(0,5)
0.053
(1,35)
0.186
(4.8)
.539 ± .032
(13.7 ± .8)
0.030
(0,7)
0.062
(1,65)
T11
.25 LEVER
14,7
( .579 )
12,2
( .480 )
PT
12,2
( .480 )
Operate
Position
.28 LEVER
18,6
( .7323 )
14,7
( .5787 )
PT
PT
FP
OP FP
12,2
( .4803 )
FP OP
Black
(COM)
SWITCH CHARACTERISTICS “J” TERMINATION ONLY
Actuator
code
Maximum Operate
Force (grams/oz.)
Minimum Release
Force (grams/oz.)
Free Position
Max
Maximum
Pre-travel
Operate
Position
Maximum
Differential
Minimum
Overtravel
P00
130
4.59
13
0.45
.650
(16.50)
0.032
(0,8)
.593 ± .020
(15.05 ± 0.5)
.012
(0.3)
0.031
(0.8)
T10
195
6.88
55
1.93
.781
(19.85)
0.152
(3.85)
.618 ± .028
(15.7 ± .7)
0.020
(0.5)
0.053
(1.35)
T11
160
5.64
45
1.58
.904
(22.95)
0.188
(4.8)
.717 ± .039
(18.2 ± 1.0)
0.030
(0.7)
0.062
(1.65)
Dimensions are shown: mm (inch)
Specifications and dimensions subject to change
J–43
www.ck-components.com
J
Snap-acting
P00
Actuator
code
ZMS Series
Subminiature Snap-acting Switches (Dust Proof)
TERMINATIONS
P
L
PC THRU-HOLE
LEFT FOOTED, PC THRU-HOLE
PC MOUNT
(2) 2.5 holes
(.098)
9.53
(.375)
5.85
(0.230)
0.23
(.010)
0,6 ± 0,1
( .024±.003)
5,08
( .200)
5,08
(.200)
5,08
( .200)
0,5±0,05
( .020±.001)
2,8
( .110)
2,5
( .098)
To center 2,05
of terminal (.081 )
1,35/1,50
(.053) (.059)
2,85
(.1122 )
5,08
(.200)
5.08
(.200)
0,5
0,6
(.0197 ) (.0236)
2,8
(.1102 ) 5,08
(.2000 )
10.16
(.400 )
5,08
(.2000 )
(3) 1.35 to 1.50 holes
(.053) to (.059)
PC MOUNTING HOLE
R
RIGHT FOOTED, PC THRU-HOLE
5
(.197)
2,05
(.081)
To center
of terminal
0,5
(.020)
2,8
(.110 )
5,4
(.213 )
Snap-acting
J
J
PC MOUNT
(2) 2.5 holes
9.53
(.098)
(.375)
5.85
0.23
(0.230)
(.010)
304,8
(12.00)
RIGHT SIDE
(IP67)
GREY (NC)
12.0
(472)
5.08
(.200)
3.17
(0.125)
STRIP ENDS
12
(.472)
304.8
(12.00)
Black Blue Grey 3.17
(COM) (NO) (NC) (.125) Strip Ends
10.16
(.400)
(3) 1.35 to 1.50 holes
(.053) to (.059)
2,85
(.112 )
K
WIRE LEADS BOTTOM
(IP67)
BLUE (NO)
BLACK (COM)
S
W
SOLDER TYPE
LEFT SIDE
(IP67)
304,8
(12.00)
Standard Wire: 20 AWG UL 1007
GREY (NC)
3,17
(0.125)
STRIP ENDS
1,7
( .067 )
4,13
( .163 )
2,5
( .098 )
4,13
( .163 )
0,5
( .0197 )
2,8
( .1102 )
12
(.472)
Available options - must specify
22AWG UL1430
24AWG UL1061
26AWG UL1330
BLUE (NO)
BLACK (COM)
MOUNTING STYLES
S
STD (NO SUPPORT POST)
L
SUPPORT POST LEFT
R
SUPPORT POST RIGHT
5
( .197 )
2X 5
( .197 )
ø2.60
(1,02)
2.60
(.102)
CIRCUITRY
C
W
Y
SPDT (Single Pole, Double Throw)
SPST, NC (Single Pole, Single Throw, Normally Closed) FOR “J” TERMINATION ONLY
SPST, NO (Single Pole, Single Throw, Normally Open) FOR “J” TERMINATION ONLY
Third Angle
Projection
Dimensions are shown: mm (inch)
Specifications and dimensions subject to change
J–44
www.ck-components.com