CREE MX3SWT-A1-0000

Cree® XLamp® MX-3S LEDs
Data Sheet
The Cree XLamp
reliability of Cree
of the MX-family
secondary optics,
MX-3S LED provides the proven lighting-class performance and
XLamp LEDs in a high voltage, PLCC configuration. All members
of LEDs have wide viewing angle, uniform light output without
unlimited floor life, and electrically neutral thermal path.
The XLamp MX-3S LED brings high performance and quality of light to a range of
lighting applications that require near-line-voltage configuration, including LED light
bulbs, fluorescent retrofits and retail-display lighting.
FEATURES
•
Available in white (2,600 K to 8,300 K CCT)
•
Wide viewing angle: 120°
•
10.7 VDC nominal with voltage binning
available
•
Electrically neutral thermal path
•
Qualification at max drive current
•
RoHS-compliant
•
Unlimited floor life at ≤ 30°C/85% RH
ev 0
CLD-DS32 R
Data Sheet:
Table of Contents
Flux Characteristics (TJ = 25°C).................................................................................................................. 2
Characteristics......................................................................................................................................... 2
Relative Spectral Power Distribution............................................................................................................ 3
Relative Flux vs. Junction Temperature (IF = 65 mA)..................................................................................... 3
Electrical Characteristics (TJ = 25°C)........................................................................................................... 4
Relative Flux vs. Current (TJ = 25°C).......................................................................................................... 4
Thermal Design........................................................................................................................................ 5
Typical Spatial Distribution......................................................................................................................... 5
Reflow Soldering Characteristics................................................................................................................. 6
Notes...................................................................................................................................................... 7
Mechanical Dimensions (TA = 25°C)............................................................................................................ 8
Tape and Reel.......................................................................................................................................... 9
Packaging.............................................................................................................................................. 10
Subject to change without notice.
www.cree.com/xlamp
1
Flux Characteristics (TJ = 25°C)
The following table provides several base order codes for XLamp MX-3S LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as
a complete description of the order-code nomenclature, please consult the XLamp MX Family LED Binning and Labeling
document.
Color
Cool White
Base Order Codes
Min Luminous Flux
(lm) @ 115 mA
CCT Range
Min.
Max.
5,000 K
8,300 K
3,700 K
4,300 K
Warm White
2,600 K
3,700 K
Order Code
Group
Flux (lm)
R2
114
MX3SWT-A1-0000-000E51
Q5
107
MX3SWT-A1-0000-000D51
Q4
100
MX3SWT-A1-0000-000CE5
Q3
93.9
MX3SWT-A1-0000-000BE5
Q3
93.9
MX3SWT-A1-0000-000BE7
Q2
87.4
MX3SWT-A1-0000-000AE7
Notes:
• Cree maintains a tolerance of +/- 7% on flux measurements.
• Typical CRI for Cool White (4,300 K – 8,300 K CCT) is 75.
• Typical CRI for Warm White (2,600 K – 4,300 K CCT) is 80.
Characteristics
Characteristics
Thermal resistance, junction to solder point
Viewing angle (FWHM)
Temperature coefficient of voltage
Unit
Minimum
°C/W
11
degrees
120
mV/°C
-13
ESD classification (HBM per Mil-Std-883D)
DC forward current
mA
V
LED junction temperature
°C
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
CLD-DS32 Rev 0
Maximum
Class 2
Forward voltage (@ 115 mA)
2
Typical
150
10.7
12.0
150
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Relative Spectral Power
Relative Spectral Power Distribution
Relative Radiant Power (%)
120
100
80
5000K - 8300K CCT
3500K - 5000K CCT
60
2600K - 3500K CCT
40
20
0
400
450
500
550
600
650
700
750
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (IF = 115 mA)
100%
Relative Luminous Flux
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
3
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Electrical
Characteristics (Tj = 25ºC)
Electrical Characteristics (T = 25°C)
J
150
Forward Current (mA)
125
100
75
50
25
0
8.00
8.50
9.00
9.50
10.00
10.50
11.00
11.50
12.00
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 25ºC)
Relative Flux vs. Current (TJ = 25°C)
160%
Relative Luminous Flux (%)
140%
120%
100%
80%
60%
40%
20%
0%
0
25
50
75
100
125
150
Forward Current (mA)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
4
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Thermal Design
Thermal
Design
The maximum
forward current is determined by the thermal resistance between the LED junction and ambient. It is
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
200
180
Maximum Current (mA)
160
140
120
100
Rj-a
Rj-a
Rj-a
Rj-a
80
60
=
=
=
=
15°C/W
20°C/W
25°C/W
30°C/W
40
20
0
0
25
50
75
100
125
150
Ambient Temperature (ºC)
Typical Spatial Radiation Pattern
Typical Spatial Distribution
Relative Luminous Intensity (%)
120
100
80
60
40
20
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angle (º)
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
5
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Reflow Soldering Characteristics
In testing, Cree has found XLamp MX-3S LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the
manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature
Lead-Based Solder
Lead-Free Solder
3°C/second max.
3°C/second max.
Preheat: Temperature Min (Tsmin)
100°C
150°C
Preheat: Temperature Max (Tsmax)
150°C
200°C
60-120 seconds
60-180 seconds
183°C
217°C
60-150 seconds
60-150 seconds
215°C
260°C
10-30 seconds
20-40 seconds
6°C/second max.
6°C/second max
6 minutes max.
8 minutes max.
Average Ramp-Up Rate (Tsmax to Tp)
Preheat: Time (tsmin to tsmax)
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
Peak/Classification Temperature (Tp)
Time Within 5°C of Actual Peak Temperature (tp)
Ramp-Down Rate
Time 25°C to Peak Temperature
Note: All temperatures refer to topside of the package, measured on the package body surface.
Note: While the high reflow temperatures (above) have been approved, Cree’s best practice guideline for reflow is to use
as low a temperature as possible during the reflow soldering process for these LEDs.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
6
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Notes
Moisture Sensitivity
In testing, Cree has found XLamp MX-3S LEDs to have unlimited floor life in conditions ≤30ºC / 85% relative humidity
(RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reflow cycles, with visual and electrical
inspections at each stage.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
7
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Mechanical Dimensions (TA = 25°C)
All measurements are ±.13 mm unless otherwise indicated.
Top View
Top View
Bottom View
Side View
Recommended FR4 Solder Pad
Recommended MCPCB Solder Pad
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
8
CLD-DS32 Rev 0
Alternative Solder Pad
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
1.5±.1
4.0±.1
8.0±.1
1.75±.10
2.5±.1
Cathode Side
Tape and Reel
+.3
12.0
.0
All dimensions in mm.
Anode Side
User Feed Direction
(denoted by + and circle)
END
START
User Feed Direction
END
START
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
User Feed Direction
Cover Tape
Pocket Tape
13mm
7"
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
9
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Dessicant
Desiccant
(inside
bag)
(inside bag)
Packaging
Humidity
Indicator
Humidity
Indicator
Card (inside
bag)bag)
(inside
All dimensions in mm.
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label Bin
with
Cree Bin
CREE
Code
&
Barcode
Label
Code,
Qty,
Lot #
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label
with
Cree Bin
Label with
Customer
P/N, Qty,
Lot #,
PO##
Code,
Qty,
Lot
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Patent Label
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Label with Customer Order
Code, Qty, Reel ID, PO #
Label with Customer Order Code,
Qty, Reel ID, PO#
Label with Cree Bin Code,
Qty, Lot #
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
10
CLD-DS32 Rev 0
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp