EIC BYT56J

BYT56A - BYT56M
FAST RECOVERY RECTIFIERS
DO-201AD
PRV : 50 - 1000 Volts
Io : 3.0 Amperes
FEATURES :
*
*
*
*
*
*
*
1.00 (25.4)
MIN.
0.21 (5.33)
0.19 (4.82)
High current capability
High surge current capability
High reliability
Low reverse current
Low forward voltage drop
Fast switching for high efficiency
Pb / RoHS Free
0.375 (9.52)
0.285 (7.24)
1.00 (25.4)
MIN.
0.052 (1.32)
0.048 (1.22)
MECHANICAL DATA :
* Case : DO-201AD Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 1.16 grams
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
RATING
Maximum Repetitive Peak Reverse Voltage
Maximum Reverse Voltage
Maximum Average Forward Current
SYMBOL
BYT
56A
BYT
56B
BYT
56D
BYT
56G
BYT
56J
BYT
56K
BYT
56M
UNIT
VRRM
50
100
200
400
600
800
1000
V
VR
50
100
200
400
600
800
1000
V
IF(AV)
1.5 (on PC Board)
A
3.0 ( L = 10 mm, TL = 25°C)
Maximum Peak Forward Surge Current,
( tp = 10 ms, half sinewave)
IFSM
80
A
Maximum Forward Voltage at IF = 3 A
VF
1.4
V
Maximum Reverse Current
IR
5 (Tj = 25°C)
µA
IR(H)
150 (Tj = 150°C)
µA
Trr
100
ns
RthJA
25
K/W
Junction Temperature Range
TJ
- 55 to + 175
°C
Storage Temperature Range
TSTG
- 55 to + 175
°C
( VR = VRRM)
Maximum Reverse Recovery Time
(IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A.)
Maximum Junction Ambient Thermal Resistance
( L = 10mm, TL = Constant )
Note :
(1) Reverse Recovery Test Conditions
Page 1 of 2
Rev. 03 : October 5, 2005
RATING AND CHARACTERISTIC CURVES ( BAT56A - BAT56M )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω
Trr
10 Ω
+ 0.5
D.U.T.
+
0
PULSE
GENERATOR
( NOTE 2 )
50 Vdc
(approx)
1Ω
- 0.25
OSCILLOSCOPE
( NOTE 1 )
- 1.0 A
SET TIME BASE FOR 25-35 ns/cm
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
1
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG.2 - DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
FIG.3 - MAXIMUM THERMAL RESISTANCE
vs. LEAD LENGTH
50
VR = VRRM
half sinewave
RthJA = 45K/W
L = 10 mm
4
RthJA - Therm. Resist.
Junction/Ambient (K/W)
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
5
3
2
1
0
0
25
50
75
100
125
150
40
30
20
L
TL = constant
10
0
175
L
0
5
AMBIENT TEMPERATURE, ( °C)
10
15
20
25
30
35
40
L , Lead Length (mm)
FIG.4 - TYPICAL FORWARD CHARACTERISTICS
FIG.5 - REVERSE CURRENT
vs. JUNCTION TEMPERATURE
100
IR, REVERSE CURRENT(µA)
FORWARD CURRENT, AMPERES
10
TJ = 25 °C
10
1
0.1
0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
FORWARD VOLTAGE, VOLTS
Page 2 of 2
2.7
3.0
10
VR = VRRM
1
0.1
25
50
75
100
125
150
175
200
Tj, JUNCTION TEMPERATURE
Rev. 03 : October 5, 2005