RM10 - RM10Z SILICON RECTIFIER DIODES D2 PRV : 200 - 800 Volts Io : 1.2 - 1.5 Amperes FEATURES : * * * * * * 0.161 (4.10) 0.154 (3.90) High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.00 (25.4) MIN. 0.284 (7.20) 0.268 (6.84) 0.034 (0.86) 0.028 (0.71) MECHANICAL DATA : * Case : D2 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.465 gram 1.00 (25.4) MIN. Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL RM10Z RM10 RM10A RM10B UNIT Maximum Repetitive Peak Reverse Voltage VRRM 200 400 600 800 V Maximum RMS Voltage VRMS 140 280 420 560 V Maximum DC Blocking Voltage VDC 200 400 600 800 V IF 1.5 1.2 A IFSM 120 150 A Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 70 °C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) VF 0.91 V Maximum DC Reverse Current Maximum Forward Voltage at IF = 1.5 Amps. Ta = 25 °C IR 10 µA at rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA Typical Junction Capacitance (Note1) CJ 30 pF RθJA 50 °C/W Junction Temperature Range TJ - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Typical Thermal Resistance (Note2) Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC (2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted. Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( RM10 - RM10Z ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 1.5 RM10Z PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 1.2 RM10 - RM10B 0.9 0.6 0.3 8.3 ms SINGLE HALF SINE WAVE Ta = 50 °C 120 RM10 - RM10B 90 60 RM10Z 30 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 0 175 1 AMBIENT TEMPERATURE, ( °C) 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 10 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES 2 10 1.0 Pulse Width = 300 µs 2% Duty Cycle 0.1 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 TJ = 25 °C PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005