SAW Components SAW Duplexer for W-CDMA Band IV / CDMA 1x AWS Band Series/type: Ordering code: B7699 B39212B7699P810 Date: Version: February 04, 2010 2.0 EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Application ■ Low-loss SAW duplexer for mobile telephone ■ ■ ■ ■ W-CDMA Band IV / CDMA 1x AWS systems Low insertion attenuation Low amplitude ripple Usable passband 45 MHz Fully matched with integrated matching network Features Package size 2.5 x 2.0 x 0.89 mm3 RoHS compatible Approx. weight 0.035 g Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ Electrostatic Sensitive Device (ESD) ■ Moisture Sensitive Level 3 ■ ■ ■ ■ Pin configuration ■ ■ ■ ■ ■ 1 3 6 2, 4, 5 7, 8, 9 1 RX Output TX Input Antenna To be grounded To be grounded 3 7,8,9 2,4,5 6 Please read cautions and warnings and important notes at the end of this document. 2 February 04, 2010 SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Characteristics for W-CDMA Band 4 Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –15 ˚C to +80 ˚C ZANT= 50 Ω ZRX = 50Ω ZTX = 50 Ω Characterisitcs TX - ANT min. Center frequency fC Maximum insertion attenuation @fcarrier 1712.4 ... 1752.6 αWCDMA1) @fcarrier 1712.4 ... 1752.6 MHz MHz typ. max. @ 25 ˚C 1732.5 1.5 1.8 dB 1.5 1.72) dB 0.4 1.0 dB 0.85 2.0 % ∆αWCDMA1) Amplitude ripple (p-p) @fcarrier 1712.4 ... 1752.6 MHz Error Vector Magnitude 1712.4 ... 1752.6 MHz Input VSWR (TX port) 1710.0 ... 1755.0 MHz 1.9 2.0 Output VSWR (ANT port) 1710.0 ... 1755.0 MHz 1.7 2.0 EVM3) α Attenuation @fcarrier 1) 2) 3) MHz 0.3 1310.0 1574.0 2112.4 2400.0 3420.0 5130.0 ... ... ... ... ... ... ... 1000.0 1355.0 1577.0 2152.6 2500.0 3510.0 5265.0 MHz MHz MHz MHz MHz MHz MHz αWCDMA1) 30 30 38 43 25 20 7 38 36 45 46 37 25 12 Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (9). Maximum insertion attenuation at room temperature T= +25 ˚C. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 3 February 04, 2010 dB dB dB dB dB dB dB SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Characteristics for W-CDMA Band 4 Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –15 ˚C to +80 ˚C ZANT= 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characterisitcs ANT - RX min. Center frequency fC Maximum insertion attenuation @fcarrier 2112.4 ... 2152.6 αWCDMA1) @fcarrier 2112.4 ... 2152.6 MHz MHz typ. max. @ 25 ˚C 2132.5 1.8 2.5 dB 1.8 2.42) dB 0.4 1.0 dB 1.0 3.0 % ∆αWCDMA1) Amplitude ripple (p-p) @fcarrier 2112.4 ... 2152.6 MHz Error Vector Magnitude 2112.4 ... 2152.6 MHz Input VSWR (ANT port) 2110.0 ... 2155.0 MHz 1.65 2.0 Output VSWR (RX port) 2110.0 ... 2155.0 MHz 1.4 2.0 EVM3) α Attenuation @fcarrier 1) 2) 3) MHz 0.3 1310.0 1712.4 ... 1310.0 ... 1355.0 ... 1752.6 MHz MHz MHz 1910.0 2400.0 3820.0 4220.0 5530.0 ... ... ... ... ... MHz MHz MHz MHz MHz 1955.0 2500.0 3910.0 4370.0 5665.0 αWCDMA1) 30 38 46 27 25 19 20 20 42 42 51 33 35 39 32 27 Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (9). Maximum insertion attenuation at room temperature T= +25 ˚C. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 4 February 04, 2010 dB dB dB dB dB dB dB dB SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Characteristics for W-CDMA Band 4 Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –15 ˚C to +80 ˚C ZANT= 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characterisitcs TX - RX min. typ. max. @ 25 ˚C αWCDMA1) Isolation @fcarrier 1712.4 ... 1752.6 MHz 52 56 dB @fcarrier 2112.4 ... 2152.6 MHz 45 51 dB 1) Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (9). Please read cautions and warnings and important notes at the end of this document. 5 February 04, 2010 SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 50Ω ZTX = 50 Ω Characterisitcs TX - ANT min. Center frequency fC Maximum insertion attenuation 1710.0 ... 1755.0 typ. max. @ 25 ˚C 1732.5 MHz α MHz 1.6 2.0 dB ... 1755.0 MHz 1.6 1.91) dB Amplitude ripple (p-p) 1710.0 ... 1755.0 MHz 0.4 1.0 dB Input VSWR (TX port) 1710.0 ... 1755.0 MHz 1.9 2.0 Output VSWR (ANT port) 1710.0 ... 1755.0 MHz 1.7 2.0 1710.0 ∆α α Attenuation 0.3 1310.0 1574.0 2110.0 2400.0 3420.0 5130.0 1) ... ... ... ... ... ... ... 1000.0 1355.0 1577.0 2155.0 2500.0 3510.0 5265.0 MHz MHz MHz MHz MHz MHz MHz 30 30 38 43 25 20 7 Maximum insertion attenuation at room temperature T= +25 ˚C Please read cautions and warnings and important notes at the end of this document. 6 February 04, 2010 38 36 45 46 37 25 12 dB dB dB dB dB dB dB SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characterisitcs ANT - RX min. Center frequency fC Maximum insertion attenuation 2110.0 ... 2155.0 typ. max. @ 25 ˚C 2132.5 MHz α MHz 1.8 2.6 dB ... 2155.0 MHz 1.8 2.51) dB Amplitude ripple (p-p) 2110.0 ... 2155.0 MHz 0.4 1.0 dB Input VSWR (ANT port) 2110.0 ... 2155.0 MHz 1.65 2.0 Output VSWR (RX port) 2110.0 ... 2155.0 MHz 1.4 2.0 2110.0 ∆α α Attenuation 0.3 1310.0 1710.0 1910.0 2400.0 3820.0 4220.0 5530.0 1) ... ... ... ... ... ... ... ... 1310.0 1355.0 1755.0 1955.0 2500.0 3910.0 4370.0 5665.0 MHz MHz MHz MHz MHz MHz MHz MHz 30 38 46 27 25 19 20 20 Maximum insertion attenuation at room temperature T= +25 ˚C Please read cautions and warnings and important notes at the end of this document. 7 February 04, 2010 42 42 51 33 35 39 32 27 dB dB dB dB dB dB dB dB SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Characteristics for CDMA 1x AWS Band Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characterisitcs TX - RX min. typ. max. @ 25 ˚C α Isolation 1710.0 ... 1755.0 MHz 52 56 dB 2110.0 ... 2155.0 MHz 45 51 dB Please read cautions and warnings and important notes at the end of this document. 8 February 04, 2010 SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Maximum ratings Storage temperature range DC voltage ESD voltage Input power at 1710.0 ... 1755.0 MHz elsewhere 1) Tstg VDC VESD PIN –40/+85 5 501) ˚C V V 29 10 machine model, 10 pulses source and load impedance 50 Ω continuous wave T = 55˚C, 5000 h } dBm dBm acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for UMTS-Passband, fCarrier ranges from 2112.4 MHz (lowest Rx channel) to 2167.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) Please read cautions and warnings and important notes at the end of this document. 9 2 df = 1 February 04, 2010 SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Frequency Response TX-ANT (Power Transfer Function) Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 10 February 04, 2010 SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Frequency Response RX-ANT (Power Transfer Function) Frequency Response RX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 11 February 04, 2010 SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet Frequency Response TX-RX (Power Transfer Function) Frequency Response TX-RX (wideband) Please read cautions and warnings and important notes at the end of this document. 12 February 04, 2010 SAW Components B7699 1732.5/2132.5 MHz SAW Duplexer Data Sheet References Type B7699 Ordering code B39212B7699P810 Marking and package C61157-A3-A67 Packaging F61074-V8153-Z000 Date codes L_1126 B7699_NB.s3p S-parameters B7699_WB.s3p See file header for pin/port assignments Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2010. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 13 February 04, 2010 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 14 February 04, 2010