MIL-DTL 26482 Type 237-127 MIL-DTL-26482 Series I Type Hermetic Bayonet Coupling Solder Flange Mount Receptacle with Crimp Removable Rear Sockets (M39029/22 Type) Connector Style 127 = Solder Mount Receptacle 237 - 127 Series 230 MIL-DTL-26482 Type Shell Size Z1 Alternate Insert Arrangement Insert Arrangement W, X, Y or Z (Omit for Normal) (Special) 22 - 41 * X Contact Type * = Pin Face, Crimp Removable Rear Sockets Material/Finish Z1 = Cres/Passivated D I NSULATOR/GR OMMET ASS EMBLY TO BE EPOXI ED I N P LACE. I NSULATOR AS SY IS NON- REMOVABLE .441 ( 11.2) 1.7 92/1 . 790 ( 45. 52/4 5.48) A Ø W V j U X Y Z A a m S h t P p e f M E L F . 020 ( 0.5) X 45° Ø 1.4 17/1 . 409 Ø 36.0 MAX) G d q N D c r g R C b n s i T B k H K J .394 ( 10.0) 1.427 ( 36. 25) © 2009 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-12 E-Mail: [email protected] MIL-DTL 26482 Type 237-127 MIL-DTL-26482 Series I Type Hermetic Bayonet Coupling Solder Flange Mount Receptacle with Crimp Removable Rear Sockets (M39029/22 Type) Sharp Corner No Chamfer Burr Allowed Ø1.870/1.869 (47.50/47.47) .157 (4.0) R.040 (1.0) 150° D E .020 (0.5) F VIEW A N X K F L V U J T Q E W K S P D J Y M C H Z A B G R.020 Max (0.5 Max) A B C I R G P MN T S H R See Note 5 R.079 (2.0) D APPLICATION NOTES 1. To be identified with manufacturer’s name, part number and date code, space permitting. 2. Material/Finish: Shell and bayonets: Z1 - Cres/passivated. Contacts - Nickel-iron alloy/gold plated. Hermetic Insulator - Full glass/N.A. Socket insulator - Rigid dielectric/N.A. Seals and grommet - Silicone elastomer/N.A. Removable sockets - Copper alloy/gold plated. Socket retention clips - Copper alloy/N.A. 3. Glenair 237-127 is intermatable with any QPL manufacturers MIL-DTL-26482 plug, shell size 22, arrangement -41 per MILSTD-1669, normal position and socket face. © 2009 Glenair, Inc. 4. Connector is supplied with crimp-style removable contacts per M39029/22. Quantity will be sufficient to fully populate connector plus 1 extra each size. 5. Hermetic seal is centered in this flange position. 6. Performance requirements: Hermeticity - <1 x 10-7 sccHe/se @ 1 Atm. Diff. DWV - 1500 VAC pin-to-pin or pin-to-shell for 1 minute without breakdown (Series II requirement). Temperature range -40° to +100°C. 7. Metric Dimensions (mm) are indicated in parentheses. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-13 E-Mail: [email protected]