DIP Switches End Stackable Piano Type DIP Switch DX516 Series DX516T_RC WITHOUT B±0.10=2.54*(P-1) (2,4,6,8,10 POS AVAIL) SCHEMATIC(TYP .) DX516T_ _ _ _ THT Terminals 2.54 [0.100] 1.10 [0.043] [A ± 0.002] A± 0.05 20 [B±0.004=0.100*(P-1)] (2,4,6,8,10 POS AVAIL) SCHEMATIC(TYP .) DX516S_ _ _ _ SMT Terminals Dimention A & B: [0.028] 0.70 [0.386] 9.80 B±0.10=2.54*(P-1) [0.004] 0.10 [0.031] 0.80 [0.268] 6.80 [0.024] 0.60 [0.100 TYP.] 2.54 TYP. [0.197MAX] 5.00MAX [0.048] 1.22 [0.035] 0.90 DX516S_RC WITHOUT [0.425] 10.80 [0.236] 6.00 General Tolerance：±0.2mm General Tolerance ：±0.2mm Tube Dimension: General Specifications: DX516_10 10 MATERIALS: DX516_08 8 » Cover: UL 94V-0 Nylon High-Temp Thermoplastic Black DX516_06 6 DX516_04 4 DX516_02 2 » Base: UL 94V-0 Nylon High-Temp Thermoplastic Black » Actuator: UL 94V-0 Nylon High-Temp Thermoplastic White » Contact: Alloy Copper with gold cladding DX516T NO. OF PROD. NO. POS. DIM. A DX516S TAPE & REEL: DIM. B » Terminal: Brass with gold cladding MECHANICAL: » Mechanical Life: 2,000 cycles Packing Unit: » Operation Force: 800 gf » Operation Temperature: -20°C to +85°C DX516_10 95 - DX516_08 47 - DX516_06 31 - DX516_04 23 - DX516_02 18 - DX516S-02. 04.06.08.10 PROD.NO » Storage Temperature: -40°C to +85°C ELECTRICAL: » Electrical Life: 2,000 cycles » Rating: 25mA, 24VDC DX516_10 DX516_08 DX516_06 DX516_04 DX516_02 700 NO.PER NO. PER TUBE REEL » Circuit: Single pole single throw » Contact Resistance:100mȍ max,at 500VDC » Insulation Resistance: 100Mȍ max.,at 500VDC » Dielectric Strength: 500VAC / 1 minute SOLDERING PROCESSES: How to order: 1 » Wave Soldering: Recommended solder temperature at 260°C max. 5 seconds for THT type. 2 4 3 5 DX516 1 T S 2 RA RC 3 02 04 TYPE OF TERMINALS: THT Terminals SMT Terminals ACTUATOR TYPE Raised Actuator Recessed Actuator NO. OF POSITIONS: 2 Positions 4 Positions [email protected] 06 08 10 6 Positions 8 Positions 10 Positions 4 ON/OFF-POSITION Push Down ON (Standard) Push Down OFF 1 0 5 TB TR PACKAGE STYLE: Tube Tape & Reel (only S.M.T) » Hand Soldering: Use a soldering iron of 30 watts, controlled at 350°C approximately max 5 seconds while applying solder. » Reflow Soldering: When applying reflow soldering, the peak temperature or the reflow oven should be set at 260°C max. » Do not wash the switch except top tape sealed type, which suitable for spray cleaning method from top of the s/w. Reflow Temperature Proflie: MAX 260° 255° 230° 150° Room Temperature 120~150sec 5~10sec 60sec TIME(sec) www.greatecs.com