HONEYWELL HOA1886

HOA1886
Transmissive Sensor
FEATURES
• Choice of phototransistor or photodarlington
output
• Ambient light and dust protective filter
• 0.200 in.(5.08 mm) slot width
INFRA-76.TIF
DESCRIPTION
The HOA1886 series consists of an infrared emitting
diode facing an NPN silicon phototransistor
(HOA1886- 011, - 012) or photodarlington
(HOA1886- 013) encased in a black thermoplastic
housing with IR transmissive inserts which form the
optical windows. This arrangement provides excellent
protection against ambient light while eliminating
aperture openings which could be clogged by airborne
contaminants. Detector switching takes place whenever
an opaque object passes through the slot between
emitter and detector. The HOA1886 series employs
plastic molded components and has a 0.050 in.(1.27
mm) x 0.060 in.(1.52 mm) vertical aperture in front of
the detector. For additional component information see
SEP8506/8706, SDP8406, and SDP8106.
OUTLINE DIMENSIONS in inches (mm)
Tolerance
3 plc decimals
±0.010(0.25)
2 plc decimals
±0.020(0.51)
.439(11.15)
.350(8.89)
OPTICALC
L
.250(6.35)
.059(1.50)
COLLECTOR
.020(.51)
SQ. LEADS
TYP.
.200(5.08)
.600(15.24)
EMITTER
.040(1.01)
2 PLCS
.400(10.16)
ANODE
.200(5.08)
.100(2.54)
.170(4.32)
CATHODE
.120(3.05) MIN.
Housing material is polycarbonate. Housings are
soluble in chlorinated hydrocarbons and ketones.
Recommended cleaning agents are methanol and
isopropanol.
DIM_056.ds4
334
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
HOA1886
Transmissive Sensor
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
TEST CONDITIONS
IR EMITTER
DETECTOR
COUPLED CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS
SCHEMATIC
(25¡C Free-Air Temperature unless otherwise noted)
Operating Temperature Range
Storage Temperature Range
Soldering Temperature (5 sec)
IR EMITTER
Power Dissipation
Reverse Voltage
Continuous Forward Current
DETECTOR
Collector-Emitter Voltage
Emitter-Collector Voltage
Power Dissipation
-40¡C to 85¡C
-40¡C to 85¡C
240¡C
100 mW [À]
3V
50 mA
30 V
5V
100 mW [À]
Notes
1. Derate linearly at 0.78 mW/¡C above 25¡C.
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
h
335
HOA1886
Transmissive Sensor
Fig. 1
IRED Forward Bias Characteristics
Fig. 2
gra_092.ds4
Pulsed
condition
TA = 80 °C
TA = 25 °C
TA = -40 °C
100
Photodarlington
10
Phototransistor
1
0.8
1.0
1.2
1.4
1.6
1.8
10
2.0
100
Fig. 4
gra_301.cdr
Normalized collector current
Dark Current vs
Temperature
1000
10000
Load resistance - Ohms
Forward voltage - V
Fig. 3
gra_096.ds4
1000
Response time - µs
Forward current - mA
100
90
80
70
60
50
40
30
20
10
0
Non-Saturated Switching Time vs
Load Resistance
Collector Current vs
Ambient Temperature
gra_095.ds4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-50
-25
0
25
50
75
100
Free-air temperature - °C
All Performance Curves Show Typical Values
336
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
HOA1886
Transmissive Sensor
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
h
337