MCC TM Micro Commercial Components Micro Commercial Components 20736 Marilla Street Chatsworth Chatsworth, CA 91311 Phone: (818) 701-4933 Fax: (818) 701-4939 ESDA6V1L Features • • • • • • 6.1Volts ESD Protection Device Dual Transil Array For ESD Protection 2 Unidirectional Transil Functions Low leakageCurrent: IRmax<20 uA at VWM 300W peak pulse power (8/20 us) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 SOT-23 A Maximum Ratings Parameter D Symbol Limits unit VPP 25 16 9 KV KV KV C B Electrostatic discharge MIL STD 883C-Method 3015-6 IEC61000-4-2 air discharge IEC61000-4-2 contact discharge Peak pulse power 8/20us PPP 300 Junction temperature Tj 150 Storage temperature range T stg Maximum lead temperature For soldering during 10s TL -55~+150 F E W o C H G J o C K 260 o C DIM A B C D E F G H J K Pin Configuration-Top View INCHES MIN .110 .083 .047 .035 .070 .018 .0005 .035 .003 .015 MAX .120 .098 .055 .041 .081 .024 .0039 .044 .007 .020 MM MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE .031 .800 .035 .900 .079 2.000 inches mm .037 .950 .037 .950 www.mccsemi.com Revision: A 1 of 4 2011/01/01 MCC ESDA6V1L Micro Commercial Components ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Parameter VWM Stand-off voltage VBR Breakdown voltage VCL Clamping voltage IRM Leakage current IPP Peak pulse current αT Voltage temperature coefficient C Capacitance Rd Dynamic resistance VF Forward voltage drop Parameter Test Conditions Symbol Min Typ Max Unit 6.65 7.2 V Breakdown voltage IR=1.0mA VBR 6.1 Leakage current VWM=5.25V IR - Capacitance 0V bias C - Forward voltage drop IF=200mA VF - Revision: A - 20 µA 140 - pF - 1.25 V www.mccsemi.com 2 of 4 2011/01/01 TM MCC ESDA6V1L Micro Commercial Components PPP(W) PPP(Tj initial) / PPP(Tj initial=25℃) TYPICAL CHARACTERISTICS Tj initial (℃) tp (µs) Fig.2: Peak pulse power vs. exponential pulse duration Fig.1: Peak power dissipation vs. initial junction temperature C (pF) IPP (A) (Tj initial = 25℃) VCL (V) VR (V) Fig.3: Clamping voltage vs. peak pulse current (Tj initial = 25℃, rectangular waveform tp = 2.5µs) IFM (A) IR(Tj) / IR (Tj=25℃) Fig.4: Capacitance vs. reverse applied voltage (typical values) Tj (℃) values) Temperature (typical VFM (V) Current (typical values) Fig.5: Relative variation of leakage current vs. junction Fig.6: Peak forward voltage drop vs. peak forward www.mccsemi.com Revision: A 3 of 4 2011/01/01 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01