FAIRCHILD PN4122_01

PN4122
C
TO-92
BE
PNP General Purpose Amplifier
This device is designed for use as general purpose amplifiers
and switches requiring collector currents to 100 mA. Sourced
from Process 66. See 2N3906 for characteristics.
Absolute Maximum Ratings*
Symbol
TA = 25°C unless otherwise noted
Parameter
Value
Units
V
VCEO
Collector-Emitter Voltage
40
VCBO
Collector-Base Voltage
40
V
VEBO
Emitter-Base Voltage
5.0
V
IC
Collector Current - Continuous
200
mA
TJ, Tstg
Operating and Storage Junction Temperature Range
-55 to +150
°C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics
Symbol
PD
TA = 25°C unless otherwise noted
Characteristic
RθJC
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Case
RθJA
Thermal Resistance, Junction to Ambient
 1997 Fairchild Semiconductor Corporation
Max
Units
PN4122
625
5.0
83.3
mW
mW/°C
°C/W
200
°C/W
PN4122
Discrete POWER & Signal
Technologies
(continued)
Electrical Characteristics
Symbol
TA = 25°C unless otherwise noted
Parameter
Test Conditions
Min
Max
Units
OFF CHARACTERISTICS
V(BR)CEO
Collector-Emitter Breakdown Voltage*
I C = 10 mA, I B = 0
40
V
V(BR)CBO
Collector-Base Breakdown Voltage
I C = 10 µA, IE = 0
40
V
V(BR)EBO
Emitter-Base Breakdown Voltage
I E = 10 µA, I C = 0
5.0
V
V(BR)CES
Collector-Emitter Breakdown Voltage
I C = 10 µA
40
nA
IB
Base Cutoff Current
VCE = 30 V
25
nA
ICES
Collector Cutoff Current
VCE = 30 V
VCE = 30 V, TA = 65 °C
25
25
nA
µA
ON CHARACTERISTICS*
hFE
DC Current Gain
VCE( sat)
Collector-Emitter Saturation Voltage
VBE( sat)
Base-Emitter Saturation Voltage
VCE = 1.0 V, IC = 100 µA
VCE = 1.0 V, IC = 1.0 mA
VCE = 1.0 V, IC = 10 mA
VCE = 1.0 V, IC = 50 mA
IC = 1.0 mA, I B = 0.1 mA
IC = 10 mA, I B = 1.0 mA
IC = 50 mA, I B = 5.0 mA
IC = 1.0 mA, I B = 0.1 mA
IC = 10 mA, I B = 1.0 mA
IC = 50 mA, I B = 5.0 mA
100
150
150
30
0.70
300
0.13
0.14
0.30
0.75
0.90
1.10
V
V
V
V
V
V
4.5
pF
8.0
pF
SMALL SIGNAL CHARACTERISTICS
Cob
Output Capacitance
VCB = 10 V, f = 1.0 MHz
Cib
Input Capacitance
VEB = 0.5 V, f = 1.0 MHz
hfe
Small-Signal Current Gain
hie
Input Impedance
IC = 10 mA, VCE = 20 V,
f = 100 MHz
IC = 1.0 mA, VCE = 10 V,
f = 1 kHz
IC = 1.0 mA, VCE = 10 V,
hre
Voltage Feedback Ratio
f = 1.0 kHz
hoe
rb’Cc
Collector-Base Time Constant
NF
Noise Figure
Output Admittance
4.5
150
4.0
8.0
VCE = 20 V, IC = 10 mA
f = 80 MHz
VCE = 5.0 V, IC = 1.0 mA,
RS = 100 Ω, f = 100 MHz,
Bw = 15 MHz
VCE = 5.0 V, IC = 100 µΑ,
RS = 1.0 kΩ, PBw = 15.7 kHz
450
12
kΩ
4.0
40
x10
µmhos
50
ps
6.0
dB
4.0
dB
-4
SWITCHING CHARACTERISTICS
ton
Turn-on Time
VCC = 30 V, IC = 50 mA,
40
ns
td
Delay Time
I B1 = 5.0 mA, VBE ( off ) = 3.0 V
15
ns
tr
Rise Time
40
ns
toff
Turn-off Time
VCC = 30 V, IC = 50 mA
150
ns
ts
Storage Time
I B1 = IB2 = 5.0 mA
140
ns
tf
Fall Time
40
ns
*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
PN4122
PNP General Purpose Amplifier
TO-92 Tape and Reel Data
TO-92 Packaging
Configuration: Figure 1.0
TAPE and REEL OPTION
FSCINT Label sample
See Fig 2.0 for various
Reeling Styles
FAIRCHILD SEMICONDUCTOR CORPORATION
LOT:
CBVK741B019
PN2222N
NSID:
D/C1:
HTB:B
QTY: 10000
SPEC:
D9842
SPEC REV:
FSCINT
Label
B2
QA REV:
5 Reels per
Intermediate Box
(FSCINT)
Customized
Label
F63TNR Label sample
LOT: CBVK741B019
FSID: PN222N
D/C1: D9842
D/C2:
F63TNR
Label
QTY: 2000
SPEC:
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
Customized
Label
(F63TNR)3
375mm x 267mm x 375mm
Intermediate Box
TO-92 TNR/AMMO PACKING INFROMATION
Packing
Style
Quantity
EOL code
Reel
A
2,000
D26Z
E
2,000
D27Z
Ammo
M
2,000
D74Z
P
2,000
D75Z
AMMO PACK OPTION
See Fig 3.0 for 2 Ammo
Pack Options
FSCINT
Label
Unit weight
= 0.22 gm
Reel weight with components
= 1.04 kg
Ammo weight with components = 1.02 kg
Max quantity per intermediate box = 10,000 units
327mm x 158mm x 135mm
Immediate Box
Customized
Label
(TO-92) BULK PACKING INFORMATION
EOL
CODE
DESCRIPTION
QUANTITY
TO-18 OPTION STD
NO LEAD CLIP
2.0 K / BOX
J05Z
TO-5 OPTION STD
NO LEAD CLIP
1.5 K / BOX
NO LEADCLIP
2.0 K / BOX
NO LEADCLIP
2.0 K / BOX
TO-92 STANDARD
STRAIGHT FOR: PKG 92,
94 (NON PROELECTRON
SERIES), 96
L34Z
TO-92 STANDARD
STRAIGHT FOR: PKG 94
(PROELECTRON SERIES
BCXXX, BFXXX, BSRXXX),
97, 98
Customized
Label
F63TNR
Label
333mm x 231mm x 183mm
Intermediate Box
BULK OPTION
LEADCLIP
DIMENSION
J18Z
NO EOL
CODE
5 Ammo boxes per
Intermediate Box
See Bulk Packing
Information table
Anti-static
Bubble Sheets
FSCINT Label
2000 units per
EO70 box for
std option
114mm x 102mm x 51mm
Immediate Box
5 EO70 boxes per
intermediate Box
530mm x 130mm x 83mm
Intermediate box
Customized
Label
FSCINT Label
10,000 units maximum
per intermediate box
for std option
©2001 Fairchild Semiconductor Corporation
March 2001, Rev. B1
TO-92 Tape and Reel Data, continued
TO-92 Reeling Style
Configuration: Figure 2.0
Machine Option “A” (H)
Machine Option “E” (J)
Style “A”, D26Z, D70Z (s/h)
Style “E”, D27Z, D71Z (s/h)
TO-92 Radial Ammo Packaging
Configuration: Figure 3.0
FIRST WIRE OFF IS COLLECTOR
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP
ORDER STYLE
D74Z (M)
FIRST WIRE OFF IS EMITTER (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
ORDER STYLE
D75Z (P)
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON TOP
September 1999, Rev. B
TO-92 Tape and Reel Data, continued
TO-92 Tape and Reel Taping
Dimension Configuration: Figure 4.0
Hd
P
Pd
b
Ha
W1
d
L
H1 HO
L1
S
WO
t
W2
W
t1
P1 F1
DO
P2
PO
User Direction of Feed
TO-92 Reel
Configuration: Figure 5.0
ITEM DESCRIPTION
SYMBOL
DIMENSION
Base of Package to Lead Bend
b
0.098 (max)
Component Height
Ha
0.928 (+/- 0.025)
Lead Clinch Height
HO
0.630 (+/- 0.020)
Component Base Height
H1
0.748 (+/- 0.020)
Component Alignment ( side/side )
Pd
0.040 (max)
Component Alignment ( front/back )
Hd
0.031 (max)
Component Pitch
P
0.500 (+/- 0.020)
Feed Hole Pitch
PO
0.500 (+/- 0.008)
Hole Center to First Lead
P1
0.150 (+0.009, -0.010)
Hole Center to Component Center
P2
0.247 (+/- 0.007)
Lead Spread
F1/F2
0.104 (+/- 0 .010)
Lead Thickness
d
0.018 (+0.002, -0.003)
Cut Lead Length
L
0.429 (max)
Taped Lead Length
L1
0.209 (+0.051, -0.052)
Taped Lead Thickness
t
0.032 (+/- 0.006)
Carrier Tape Thickness
t1
0.021 (+/- 0.006)
Carrier Tape Width
W
0.708 (+0.020, -0.019)
Hold - down Tape Width
WO
0.236 (+/- 0.012)
Hold - down Tape position
W1
0.035 (max)
Feed Hole Position
W2
0.360 (+/- 0.025)
Sprocket Hole Diameter
DO
0.157 (+0.008, -0.007)
Lead Spring Out
S
0.004 (max)
Note : All dimensions are in inches.
ELECT ROSTATIC
SEN SITIVE D EVICES
D4
D1
D2
F63TNR Label
ITEM DESCRIPTION
SYSMBOL
MINIMUM
MAXIMUM
Reel Diameter
D1
13.975
14.025
Arbor Hole Diameter (Standard)
D2
1.160
1.200
D2
0.650
0.700
Customized Label
(Small Hole)
W1
Core Diameter
D3
3.100
3.300
Hub Recess Inner Diameter
D4
2.700
3.100
Hub Recess Depth
W1
0.370
0.570
Flange to Flange Inner Width
W2
1.630
Hub to Hub Center Width
W3
1.690
2.090
W3
W2
Note: All dimensions are inches
D3
July 1999, Rev. A
TO-92 Package Dimensions
TO-92 (FS PKG Code 92, 94, 96)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.1977
©2000 Fairchild Semiconductor International
January 2000, Rev. B
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
FACT Quiet Series™
FAST 
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
PowerTrench 
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER 
SMART START™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. G