Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8505183002 Item: HE05-1A83-02 Preliminary Datasheet Coil Data at 20 °C Conditions Min Typ Conditions Min Typ Max Unit Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 83 Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Special Product Data Insulation resistance Coil/Contact Isolation voltage Coil/Contact-shiel Housing material Sealing compound Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" Start Value & $ ' Start Value # $ ! $ & % RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ( ) % *+ Conditions Min Typ Max RH <45%, 200 VDC test voltage Unit , ) Polycarbonat Polyurethan Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Max % /% / wave soldering max. 5 sec. %0 Unit . . . Modifications in the sense of technical progress are reserved Designed at: 03/30/09 Designed by: WKOVACS Approval at: Last Change at: 05/21/10 Last Change by: MAPODACA Approval at: 04/01/09 Approval by: Approval by: KOLBRICH Rev. No.: 03