Molex’s LED Array Holder, ideal for OEM light-fixture manufacturers, simplifies the LED installation process for Bridgelux energy-efficient ES and RS Arrays and reduces installation time with compression contacts that eliminate hand soldering LED technology has been proven to reduce the amount of energy consumed and is becoming a more reliable, efficient and user-friendly way for accommodating general illumination requirements. Using unmatched interconnect technology, Molex provides a solderless solution to mounting LED arrays into OEM designs. LED array holders simplify the LED installation process by eliminating the need for hand or SMT soldering and expensive SMT equipment. The holders will allow customers to install LED arrays quickly into fixtures, enable field replacements and facilitate upgrades to current applications. For additional information visit: www.molex.com/link/holderbridgelux.html For information about additional Solid State Lighting (SSL) that complements Bridgelux and other array products visit: www.molex/industry/solidstatelighting.com FEATURES AND BENEFITS • Compression contacts to power array simplifies the LED installation process by eliminating hand soldering or expensive Surface Mount Technology (SMT) equipment and reduces installation time • Double-ended wire-trap terminal to attach power source allows for wiring serial or parallel LED sequences, ensuring ease of array assembly • Screw-mount attachment method for securing array to heat sink provides voltage isolation between LED and heat sink • Releasable wire trap for rework or replacement allows for field serviceability • High-temperature thermoplastic housing supports high heat-generating environments • Overall array holder form factor is less than 50.00mm (1.96”) in diameter for ES arrays and 70.00 by 71.00mm (2.75 by 2.80”) for RS arrays is ideal for lamp and small-fixture applications, including MR16 or track lighting • Clear LED protective cover is available (ES version only) with a snap-lock feature and the IP66 rated cover provides dust and impact protection; provides flexible design options • Snap-lock feature for optional optic provides aiming of light source, per application SPECIFICATIONS Reference Information Packaging: Tray UL File No.: Pending CSA File No.: Pending Designed In: Millimeters RoHS: Yes REACH: No SVHC Electrical Voltage (max.): 300V DC Current (max.): 2.5A continuous; 3.5A max. Contact Resistance: 20 milliohms max. Dielectric Withstanding Voltage: 300V DC Insulation Resistance: 5000 milliohms min. *Bridgelux is a registered trademark of Bridgelux Inc. Mechanical Wire Insertion Force: 5N (1.12lbf) max. Wire Pull Out Force: 25N (5.62 lbf) max. Durability (min): 20 Cycles Physical Overall Diameter: ES: 50.00mm (1.96”) RS: 70.00 by 71.00mm (2.75 by 2.80”) Housing: PA66 Nylon GF Contact: Copper (Cu), Nickel (Ni) and Silver (Ag) Plating: Contact Area — Silver (Ag) Solder Tail Area — Silver (Ag) Underplating — Nickel (Ni) LED Array Holders for Bridgelux* ES and RS Arrays LED Array Holder for Bridgelux* ES Array LED Array Holder for Bridgelux* RS Array APPLICATIONS • All general illumination applications - Downlighting - Track - Pendants - Linear - Architectural - Decorative • Area Lighting - Roadways - Parking Lots - Wall Packs Recessed downlighting in residential and commercial buildings LED Array Holders for Bridgelux* ES and RS Arrays Bridgelux* ES Array Bridgelux* RS Array LED Array Holder for Bridgelux* ES Arrays LED Array Holder for Bridgelux* RS Arrays LED Array Holder with Optic for Bridgelux* ES Arrays (optic sold separately from LEDIL) LED Array Holder Mounted to Heat Sink for Bridgelux* RS Arrays (Heat sink sold separately) ORDERING INFORMATION Order No. 180150-0000 180150-0001 180180-0001 Holder Version ES Plating Clear Cover No Silver (Ag) RS Yes No *Bridgelux is a registered trademark of Bridgelux Inc. www.molex.com/link/holderbridgelux.html www.molex.com/industry/solidstatelighting.html Order No. 987650-5541 Rev. 1 Printed in USA/KC/2011.05 © 2011, Molex