Sharma Resistors CR RoHS Compliant THICK FILM CHIP RESISTOR SERIES INTRODUCTION The most popular type of chip resistor developed for surface mount technology. Ideal for general purpose applications. Unique construction and special termination techniques ensure high quality and reliability. Extremely compact size for miniaturization. FEATURES Excellent Long Term stability Available in Bulk and Tape & Reel packing. Available in Tolerances of ±5% & ±1% Uniform body size ensures compatibility with High Speed automatic handling machines Compatible with flow and re-flow soldering methods Case Dimensions Table • • • • • SPECIFICATIONS Resistance Range: 1 Ohm to 10 M Ohms for E24 values(5%) 1 Ohm to 1 M Ohms for E96 values(1%) Rated Power: 1/16 to 1W at 70°C (Please see Power Derating Curve) Rated Voltage: Rated Power x Nominal Resistance. Overload Voltage: Please refer to Power Ratings Table. Temperature Coefficient: ± 100 ppm or ± 200 ppm per °C. Temperature Range: -55°C to +125°C with derating above 70°C Tolerance: ± 5% or ±1% (Special tolerance upon request.). Dimensions in mm Case Code L W 0402 1.0 + 0.05 0.5 + 0.05 0603 1.6 + 0.1 0.8 + 0.15 0805 2.0 + 0.1 1.25 + 0.10 1206 3.2 + 0.15 1.6 + 0.15 2010 5.0 + 0.15 2.5 + 0.15 2512 6.4 + 0.15 3.2 + 0.15 T Max 0.35 + 0.05 0.45 + 0.10 0.55 + 0.10 0.55 + 0.10 0.55 + 0.15 0.55 + 0.15 e 0.25 + 0.15 0.30 + 0.1 0.40 + 0.2 0.50 + 0.25 0.60 + 0.2 0.60 + 0.2 Power Derating Curve Load Life: The component will be subjected to 1000 hours of testing at rated voltage and 70° C, with duty cycles of 1.5 hours ''on'' and 0.5 hours ''off''. After the test the Resistance change will remain within ±3% of the initial value + 0.1 Ohm for values above 1 M Ohm and 5% for values less than 1 M Ohm. Resistance to Soldering Heat: The component can be subjected to a soldering temperature of 270 °C for 10 seconds. After the test the Resistance change will remain within ±3% + 0.1 Ohms. Tape, Reel and Packing Specifications Reel Dimensions; Reel Dimensions in Millimeters A B C D E W t ø178 ±2.0 ø50 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.5 ø330 ±2.0 ø100 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.6 Reel Dimensions in Inches A B C D E W t ø7 ±0.08 ø2.0 min. 5.0 ±0.02 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02 ø13 ±0.08 ø4.0 min. 5.0 ±0.3 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02 Power Ratings Table (Values above 10 M Ohms are available upon request) SIZE 0402 Rate Power Rate Current M a x i m u m at 70C of Jumper Working A Voltage Vw 1/16 50 0603 1/10 0805 1/8 1206 1/4 1 50 150 M a x i m u m Temperature Overload Coefficient Voltage of Resistance Vo ppm/C 100 + 100 + 200 100 + 100 + 200 300 + 100 + 200 2 2010 3/4 2512 1 200 400 + 100 + 200 + 100 + 200 + 100 + 200 Combination of Resistance Range of Tolerance F (+1%) J (+ 5%) (E96) (E24) 10 Ohms-562 K Ohms 1 Ohm-9.76 Ohms 10 Ohms - 1 M Ohms 10 Ohms-1 M Ohms 1 Ohm - 9.76 Ohms 1 Ohm- 10 M Ohms 10 Ohms - 1 M Ohms 1 Ohm - 9.76 Ohms 1 Ohm - 10 M Ohms 10 Ohms-1 M Ohms 1 Ohm - 9.76 Ohms 10 Ohms - 1 M Ohms 1 Ohm - 9.76 Ohms 10 Ohms - 1 M Ohms 1 Ohm - 9.76 Ohms Operating Temperature Range C -55 - + 125 1 Ohm - 10 M Ohms 1 Ohm - 10 M Ohms 1 Ohm - 10 M Ohms Sharma Resistors RoHS Compliant Carrier Tape Dimensions; + 0.10 φ 1.5 - 0.0 ± 0.1 ± 0.1 2.0 4.0 E F W B A Tmax SIZE CODE A B W F E P ±0.2 mm or ±0.2 mm or ±0.3 mm or ±0.1 mm or ±0.1 mm or ±0.1 mm or ±0.012'' ±0.004'' ±0.004'' ±0.004'' ±0.008'' ±0.008'' 0402 0.65 (0.026") 0603 P 1.1 (0.043") 1.15 (0.045") Tmax 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 2mm (0.079") 0.43mm (0.018") 1.9mm (0.075") 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 4mm (0.157") 0.60mm (0.024") 0805 1.65 (0.065") 2.4mm (0.094") 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 4mm (0.157") 0.75mm (0.030") 1206 1.9 (0.075") 2010 2.8 (0.011") 3.5mm (0.138") 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 4mm (0.157") 0.75mm (0.030") 5.6mm (0.22") 2512 3.6 (0.142") 6.7mm (0.264") 12.0mm (0.472") 5.5mm (0.217") 1.75mm (0.069") 8mm (0.315") 0.20mm (0.080") 12.0mm (0.472") 5.5mm (0.217") 1.75mm (0.069") 4mm (0.157") 0.20mm (0.080") Packing Methods; PACKING Paper Taping Reel (R) Embossed Taping Reel (K) Bulk Cassette (K) 7" (178mm) 10" (254mm) 13" (330mm) 7" (178mm) Style CR02 CR03 CR05 CR06 CR20 CR25 (0402) (0603) (0805) (1206) (2010) (2512) 10,000 5,000 5,000 5,000 - 10,000 5,000 5,000 5,000 - 10,000 5,000 5,000 5,000 - 4,000 4,000 50,000 25,000 10,000 5,000 - EIA Code-E24 Values EIA Code-E96 Values PART NUMBERING 10 33 10.0 14.7 21.5 31.6 46.4 68.1 CR 11 36 10.2 15.0 22.1 32.4 47.5 69.8 12 39 10.5 15.4 22.6 33.2 48.7 71.5 13 43 10.7 15.8 23.2 34.0 49.9 73.2 15 47 11.0 16.2 23.7 34.8 51.1 75.0 16 51 11.3 16.5 24.3 35.7 52.3 76.8 18 56 11.5 16.9 24.9 36.5 53.6 78.7 20 62 11.8 17.4 25.5 37.4 54.9 80.6 22 68 12.1 17.8 26.1 38.3 56.2 82.5 24 75 12.4 18.2 26.7 39.2 57.6 84.5 27 82 12.7 18.7 27.4 40.2 59.0 86.6 30 91 13.0 19.1 28.0 41.2 60.4 88.7 Series: 02 = 0402 03 = 0603 05 = 0805 06 = 1206 20 = 2010 25 = 2512 3 or 4 Digit EIA Code. Tolerance: F = + 1% G = + 2% J = + 5% Circuits: 0 = NA Temp. Coefficient: 0 = + 100 ppm/C 3 = + 200 ppm/C Packaging: 1 = 5K Paper Taping 2 = 10K Paper Taping 3 = 20K Paper Taping 4 = 4K Plastic Taping 5 = Loose Packing A = 5K Cassette B = 10K Cassette C = 25K Cassette D = 50K Cassette Add 3 digit multipler 13.3 19.6 28.7 42.2 61.9 90.9 Examples: 13.7 20.0 29.4 43.2 63.4 93.1 101= 100 Ohms 14.0 20.5 30.1 44.2 64.9 95.3 472= 4.7K Ohms 14.3 21.0 30.9 45.3 66.5 97.6 684= 680K Ohms Add 4 digit multipler 1R0= 1 Ohm Examples: 15R= 15 Ohms 1130= 113 Ohms Note: 6193= 619K Ohms R= decimal point in 19R1= 19.1 Ohms the EIA code 1R21= 1.21 Ohms 1871= 1.87K Ohms