PHILIPS PRTR5V0U2D

PRTR5V0U2D
Ultra low capacitance double rail-to-rail ESD protection
Rev. 01 — 28 April 2009
Product data sheet
1. Product profile
1.1 General description
Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection device in
a SOT457 (SC-74) small Surface-Mounted Device (SMD) plastic package.
The device is designed to protect two Hi-Speed data lines or high-frequency signal lines
from the damage caused by ESD and other transients.
PRTR5V0U2D integrates two ultra low capacitance rail-to-rail ESD protection channels
and one additional ESD protection diode to ensure signal line protection even if no supply
voltage is available.
1.2 Features
n
n
n
n
n
n
n
n
ESD protection of two Hi-Speed data lines or high-frequency signal lines
Ultra low input/output to ground capacitance: C(I/O-GND) = 1 pF
ESD protection up to 8 kV
IEC 61000-4-2, level 4 (ESD)
Very low clamping voltage due to an integrated additional ESD protection diode
Very low reverse current
AEC-Q101 qualified (85 °C)
Small SMD plastic package
1.3 Applications
n
n
n
n
n
n
n
n
USB 2.0 interfaces
Digital Video Interface (DVI)
High Definition Multimedia Interface (HDMI)
Mobile and cordless phones
Personal Digital Assistants (PDA)
Digital cameras
Wide Area Network (WAN) / Local Area Network (LAN) systems
PCs, notebooks, printers and other PC peripherals
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
1.4 Quick reference data
Table 1.
Quick reference data
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
C(I/O-GND)
input/output to ground
capacitance
f = 1 MHz;
V(I/O-GND) = 0 V
[1]
-
1.0
1.5
pF
C(I/O-I/O)
input/output to input/output
capacitance
f = 1 MHz;
V(I/O-I/O) = 0 V
[2]
-
0.6
-
pF
reverse standoff voltage
[3]
-
-
5.5
V
supply pin to ground
capacitance
[3]
-
16
-
pF
Per channel
Zener diode
VRWM
Csup
[1]
Measured from pin 1, 3, 4 or 6 to ground.
[2]
Measured from pin 1 or 6 to pin 3 or 4.
[3]
Measured from pin 5 to ground.
f = 1 MHz;
VCC = 0 V
2. Pinning information
Table 2.
Pinning
Pin
Symbol
Description
1
I/O1
input/output 1
2
GND
ground
3
I/O2
input/output 2
4
I/O2
input/output 2
5
VCC
supply voltage
6
I/O1
input/output 1
Simplified outline
6
1
5
2
Graphic symbol
4
3
1
6
2
5
3
4
006aab349
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
PRTR5V0U2D SC-74
Description
Version
plastic surface-mounted package (TSOP6); 6 leads
SOT457
4. Marking
Table 4.
Marking codes
Type number
Marking code
PRTR5V0U2D
ZB
PRTR5V0U2D_1
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
2 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
Per device
Tamb
ambient temperature
−40
+85
°C
Tstg
storage temperature
−55
+125
°C
Table 6.
ESD maximum ratings
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Max
Unit
[1][2]
-
8
kV
[2]
-
10
kV
Per channel
VESD
electrostatic discharge voltage
IEC 61000-4-2
(contact discharge)
MIL-STD-883 (human
body model)
[1]
Device stressed with ten non-repetitive ESD pulses.
[2]
Measured from pin 1, 3, 4 or 6 to pin 2 or 5.
PRTR5V0U2D_1
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
3 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
Table 7.
ESD standards compliance
Standard
Conditions
Per channel
IEC 61000-4-2; level 4 (ESD)
> 8 kV (contact)
MIL-STD-883; class 3 (human body model)
> 4 kV
001aaa631
IPP
100 %
90 %
10 %
tr = 0.7 ns to 1 ns
t
30 ns
60 ns
Fig 1.
ESD pulse waveform according to IEC 61000-4-2
PRTR5V0U2D_1
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
4 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
6. Characteristics
Table 8.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
IR
reverse current
VR = 5 V
[1]
C(I/O-GND)
input/output to ground
capacitance
-
<1
100
nA
f = 1 MHz;
V(I/O-GND) = 0 V
[1]
-
1.0
1.5
pF
C(I/O-I/O)
input/output to input/output
capacitance
f = 1 MHz;
V(I/O-I/O) = 0 V
[2]
-
0.6
-
pF
VF
forward voltage
IF = 1 mA
[3]
-
0.7
-
V
reverse standoff voltage
[4]
-
-
5.5
V
VBR
breakdown voltage
[4]
6
-
9
V
Csup
supply pin to ground
capacitance
[4]
-
16
-
pF
Per channel
Zener diode
VRWM
f = 1 MHz;
VCC = 0 V
[1]
Measured from pin 1, 3, 4 or 6 to ground.
[2]
Measured from pin 1 or 6 to pin 3 or 4.
[3]
Measured from pin 1, 3, 4 or 6 to pin 5.
[4]
Measured from pin 5 to ground.
006aaa483
2.0
C(I/O-GND)
(pF)
C(I/O-I/O)
(pF)
1.6
0.8
1.2
0.6
0.8
0.4
0.4
0.2
0
0
0
1
2
3
4
5
V(I/O-GND) (V)
0
f = 1 MHz; Tamb = 25 °C
Fig 2.
006aaa484
1.0
2
3
4
5
V(I/O-I/O) (V)
f = 1 MHz; Tamb = 25 °C
Input/output to ground capacitance as a
function of input/output to ground voltage;
typical values
Fig 3.
Input/output to ground capacitance as a
function of input/output to input/output
voltage; typical values
PRTR5V0U2D_1
Product data sheet
1
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
5 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
ESD TESTER
RZ
450 Ω
CZ
IEC 61000-4-2 network
CZ = 150 pF; RZ = 330 Ω
RG 223/U
50 Ω coax
4 GHz DIGITAL
OSCILLOSCOPE
10×
ATTENUATOR
50 Ω
DUT
Device
Under
Test
vertical scale = 200 V/div
horizontal scale = 50 ns/div
vertical scale = 10 V/div
horizontal scale = 50 ns/div
GND
GND
unclamped +1 kV ESD voltage waveform
(IEC 61000-4-2 network)
clamped +1 kV ESD voltage waveform
(IEC 61000-4-2 network)
vertical scale = 10 V/div
horizontal scale = 50 ns/div
GND
GND
vertical scale = 200 V/div
horizontal scale = 50 ns/div
unclamped −1 kV ESD voltage waveform
(IEC 61000-4-2 network)
Fig 4.
clamped −1 kV ESD voltage waveform
(IEC 61000-4-2 network)
006aab112
ESD clamping test setup and waveforms
PRTR5V0U2D_1
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
6 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
7. Application information
Handling data rates up to 480 Mbit/s, USB 2.0 interfaces require ESD protection devices
with an extremely low line capacitance in order to avoid signal distortion.
With a capacitance of only 1 pF, the PRTR5V0U2D offers IEC 61000-4-2,
level 4 compliant ESD protection.
The PRTR5V0U2D integrates two ultra low capacitance rail-to-rail ESD protection
channels and one additional ESD protection diode.
The additional ESD protection diode connected between ground and VCC prevents
charging of the supply.
USB controller
protected IC/device
common mode
choke
D+
D+
D−
D−
VBUS
GND
VBUS
006aaa485
Fig 5.
Application diagram: USB 2.0
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:
1. Place the PRTR5V0U2D as close to the input terminal or connector as possible.
2. The path length between the PRTR5V0U2D and the protected line should be
minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.
PRTR5V0U2D_1
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
7 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
8. Package outline
3.1
2.7
6
3.0
2.5
1.7
1.3
1.1
0.9
5
4
2
3
0.6
0.2
pin 1 index
1
0.40
0.25
0.95
0.26
0.10
1.9
Dimensions in mm
Fig 6.
04-11-08
Package outline SOT457 (SC-74)
9. Packing information
Table 9.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
Package Description
PRTR5V0U2D SOT457
3000
10000
4 mm pitch, 8 mm tape and reel; T1
[2]
-115
-135
4 mm pitch, 8 mm tape and reel; T2
[3]
-125
-165
[1]
For further information and the availability of packing methods, see Section 13.
[2]
T1: normal taping
[3]
T2: reverse taping
PRTR5V0U2D_1
Product data sheet
Packing quantity
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
8 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
10. Soldering
3.45
1.95
0.45 0.55
(6×) (6×)
0.95
solder lands
solder resist
3.3 2.825
0.95
solder paste
occupied area
0.7
(6×)
Dimensions in mm
0.8
(6×)
2.4
Fig 7.
sot457_fr
Reflow soldering footprint SOT457 (SC-74)
5.3
1.5
(4×)
solder lands
1.475
0.45
(2×)
5.05
solder resist
occupied area
1.475
Dimensions in mm
preferred transport
direction during soldering
1.45
(6×)
2.85
Fig 8.
Wave soldering footprint SOT457 (SC-74)
PRTR5V0U2D_1
Product data sheet
sot457_fw
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
9 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
11. Revision history
Table 10.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PRTR5V0U2D_1
20090428
Product data sheet
-
-
PRTR5V0U2D_1
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
10 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
12.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
ESD protection devices — These products are only intended for protection
against ElectroStatic Discharge (ESD) pulses and are not intended for any
other usage including, without limitation, voltage regulation applications. NXP
Semiconductors accepts no liability for use in such applications and therefore
such use is at the customer’s own risk.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
13. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
PRTR5V0U2D_1
Product data sheet
© NXP B.V. 2009. All rights reserved.
Rev. 01 — 28 April 2009
11 of 12
PRTR5V0U2D
NXP Semiconductors
Ultra low capacitance double rail-to-rail ESD protection
14. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data. . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Application information. . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Packing information. . . . . . . . . . . . . . . . . . . . . . 8
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10
Legal information. . . . . . . . . . . . . . . . . . . . . . . 11
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contact information. . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2009.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 28 April 2009
Document identifier: PRTR5V0U2D_1