FAIRCHILD BAS16SL_10

BAS16SL
Small Signal Diodes
Features
•
•
•
•
•
Connection Diagram
Low Forward Voltage Drop
Fast switching
Very Small and Thin SMD package
Profile height, 0.43mm max
Footprint, 1.0 x 0.6mm
1
2
2
SOD-923F
Marking: AB
Absolute Maximum Ratings *
Symbol
1
TA = 25°C unless otherwise noted
Value
Unit
VRRM
Maximum Repetitive Reverse Voltage
85
V
IF(AV)
Average Rectified Forward Current
150
mA
IFSM
Forward Surge Current
(8.3mS Single Half Sine-Wave)
500
mA
-55 to +150
°C
TJ, TSTG
Parameter
Operating Junction & Storage Temperature Range
* These ratings are limiting values above which the serviceability of the diode may be impaired.
The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics
Symbol
PD
Parameter
Power Dissipation
Thermal Resistance, Junction to Ambient *
RθJA
* Minimum land pad.
Electrical Characteristics
Symbol
Parameter
Value
Unit
227
mW
520
°C/W
TA=25°C unless otherwise noted
Test Conditions
Min.
Max.
Unit
VR
Breakdown Voltage
IR = 100μA
VF
Forward Voltage
IF = 1mA
IF = 10mA
IF = 50mA
IF = 150mA
85
715
855
1.0
1.25
mV
mV
V
V
IR
Reverse Leakage
VR = 75V
VR = [email protected]°C
VR = [email protected]°C
1.0
30
50
μA
μA
μA
trr
Reverse Recovery Time IF = IR= 10mA, irr = 0.1IR
8.0
nS
Cj
Junction Capacitance
2.0
pF
VR = 0, f = 1.0MHz
© 2010 Fairchild Semiconductor Corporation
BAS16SL Rev. A3
V
www.fairchildsemi.com
1
BAS16SL — Small Signal Diodes
October 2010
BAS16SL — Small Signal Diodes
Typical Performance Characteristics
Figure 1. Forward Current Characteristics
Figure 2. Reverse Leakage Current
100000
Reverse Current, IR[nA]
Forward Current, IF[mA]
100
o
T J=150 C
o
T J =85 C
10
o
T J=25 C
10000
o
TJ=150 C
1000
o
TJ=85 C
100
10
o
TJ=25 C
1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
10
1.0
20
Forward Voltage Drop, V F[V]
30
40
50
60
70
80
90
100
Reverse Voltage, VR[V]
Figure 3. Junction Capacitance
Figure 4. Power Derating
2.0
300
250
Power Dissipation, [mW]
Juntion Capacitance, CJ[pF]
f=1mhz
1.8
1.5
1.3
150
100
50
0
1.0
0
2
4
6
8
0
10
25
50
75
100
125
150
o
Reverse Voltage, VR[V]
Ambient Temperature, Ta[ C]
© 2010 Fairchild Semiconductor Corporation
BAS16SL Rev. A3
200
www.fairchildsemi.com
2
BAS16SL — Small Signal Diodes
Physical Dimensions
SOD-923F
0.90 - 1.10
0.27
0.17
A
0.82
0.75 - 0.85
B
0.32
0.55 - 0.65
0.08 A B
2X
0.28
0.05 - 0.15
TOP VIEW
LAND PATTERN RECOMMENDATION
0.43 Max
0.39 - 0.41
0.08 - 0.14
0.05
0.00
SEATING PLANE
END VIEW
SIDE VIEW
0.26
0.10
0.15
0.05
BOTTOM VIEW
NOTES:
A) THIS PACKAGE DOES NOT COMPLY
TO ANY CURRENT PACKAGING STANDARD.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) BODY DIMENSIONS ARE INCLUSIVE OF BURRS, AND
MOLD FLASH.
D) DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994
E) LANDPATTERN BASED ON NOMINAL PACKAGE
DIMENSIONS.
F) DRAWING FILE NAME : SOD923F1REV2
Dimensions in Millimeters
© 2010 Fairchild Semiconductor Corporation
BAS16SL Rev. A3
www.fairchildsemi.com
3
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
F-PFS¥
FRFET®
SM
Global Power Resource
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
Motion-SPM¥
OptoHiT™
OPTOLOGIC®
®
OPTOPLANAR
AccuPower¥
Auto-SPM¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
Fairchild®
®
Fairchild Semiconductor
FACT Quiet Series¥
FACT®
FAST®
FastvCore¥
FETBench¥
FlashWriter®*
FPS¥
®
PDP SPM™
Power-SPM¥
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
Sync-Lock™
®
*
®
The Power Franchise
TinyBoost¥
TinyBuck¥
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TriFault Detect¥
TRUECURRENT¥*
PSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I50
© Fairchild Semiconductor Corporation
www.fairchildsemi.com