Ordering number : ENN7431 4AM02MH5 ExPD (Excellent Power Device) 4AM02MH5 High-side Switch Features [4AM02MH5] OUT L H H Z 3 0.25 IN 5 4 Truth Table 0.15 0.3 2 1 0.65 0.07 • unit : mm 2217 0.25 • High-side switch. (Buffer input) Enable to 25 voltage operation. Low power-loss. Pch MOSFET open drain output. 1.6 • Package Dimensions 2.1 • 5 2.0 H : High level voltage 4 1 : NC 2 : IN 3 : GND 4 : OUT 5 : VDD (Bottom view) L : Low level voltage 0.85 Z : High impedance 1 Specifications 2 3 SANYO : MCPH5 (Top view) Absolute Maximum Ratings at Ta=25°C Parameter DC Supply Voltage Symbol Conditions Ratings VDD Input Voltage VIN VOUT Output Voltage Input Current Allowable Power Dissipation IIN IOUT PD Storage Temperature Tstg Output Current Unit --0.3 to +25 V --0.3 to VDD+0.3 V VDD--25 to VDD+0.3 V Mounted on a ceramic board (600mm2✕0.8mm) ±10 mA 75 mA 0.8 W --55 to +150 °C Recommended Operating Conditions at Ta=25°C Parameter DC Supply Voltage Symbol Conditions Ratings Unit VDD 3 to +25 0 to VDD V Output Voltage VIN VOUT VDD--25 to VDD V Input Rise And Fall Time ∆t / ∆v Operating Temperature Topr Input Voltage VDD<5V VDD≥5V V ≤100 ns / V 20 ns / V --40 to +85 °C Marking : XH Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2503 TS IM TA-3911 No.7431-1/4 4AM02MH5 DC Characteristics at Ta=25°C Parameter Symbol High-level Input Voltage VIH Low-level Input Voltage VIL Input Leakage Current IIN High-level Output Voltage min typ IDD Unit max VDD=5V 3.5 VDD=10V 7.0 V V VDD=15V 11.0 V VDD=25V 18.0 V VDD=5V 1.5 V VDD=10V 3.0 V VDD=15V 4.0 V VDD=25V 7.0 V VDD=25V, VIN=25V 0.1 µA 0.1 µA VDD=25V, VIN=0 VOH Supply Current Ratings Conditions VDD=5V, IO=1mA 4.5 V VDD=10V, IO=2.5mA 9.0 V VDD=15V, IO=5.0mA 13.5 V VDD=25V, IO=10mA 22.5 V µA VDD=5V, VIN=VDD, GND 0.25 VDD=10V, VIN=VDD, GND VDD=15V, VIN=VDD, GND 0.5 µA 1.0 µA VDD=25V, VIN=VDD, GND 2.0 µA AC Characteristics at Ta=25°C Parameter Symbol tPZH Propagation Delay Time tPHZ Input Capacitance Ratings Conditions min typ Unit max VDD=5V, RL=1.5kΩ VDD=10V, RL=1kΩ 40 ns 20 ns VDD=15V, RL=750Ω 15 ns VDD=25V, RL=500Ω 12 ns VDD=5V, RL=1.5kΩ 30 ns VDD=10V, RL=1kΩ 20 ns VDD=15V, RL=750Ω 15 ns VDD=25V, RL=500Ω 12 ns 8 pF CIN Block Diagram VDD OUT 5 4 1 2 3 NC IN GND Switching Time Test Circuit Switching Time Wave Form VDD 10ns 10ns VDD Input 50% IN GND OUT CL=10pF tPZH tPHZ RL 90% Output VOH 50% GND No.7431-2/4 4AM02MH5 IOUT -- VOUT 20 VDD=5V VDD=10V 70 16 Output Current, IOUT -- mA Output Current, IOUT -- mA 18 14 Ta= --25 °C 25° C 75°C 12 10 8 6 4 60 50 Ta= --25 °C 25° C 75°C 40 30 20 10 2 0 0 0 1 2 3 4 0 5 Output Voltage, VOUT -- V 4 5 VDD=25V Output Current, IOUT -- mA 20 8 9 10 IT05770 °C --25 C ° 25 C ° 75 30 7 Ta= C 5° 40 6 IOUT -- VOUT 70 --2 50 3 80 25 ° 75 C °C 60 2 Output Voltage, VOUT -- V VDD=15V = Ta 70 1 IT05769 IOUT -- VOUT 80 Output Current, IOUT -- mA IOUT -- VOUT 80 60 50 40 30 20 10 10 0 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Output Voltage, VOUT -- V Output Voltage, VOUT -- V IT05771 IOUT -- VDD 60 IT05772 IOUT -- VDD 80 VOUT=0.9✕VDD VOUT=0.8✕VDD 70 C 5° --2 °C = 25 °C Ta 75 30 20 10 --2 5° 25 C °C 60 Ta = 40 Output Current, IOUT -- mA Output Current, IOUT -- mA 50 °C 75 50 40 30 20 10 0 0 0 5 10 15 20 25 DC Supply Voltage, VDD -- V 30 0 10 15 20 25 DC Supply Voltage, VDD -- V RDS(on) -- VDD 400 5 IT05773 30 IT05774 RDS(on) -- Ta 300 Static Drain-to-Source On-State Resistance, RDS(on) -- Ω Static Drain-to-Source On-State Resistance, RDS(on) -- Ω Ta=25°C 350 300 250 200 10mA IOUT=1mA 150 100 250 5V / 1mA 200 150 .5mA 10V / 2 A 15V / 5m A m 10 25V / 100 50 50 0 0 5 10 15 DC Supply Voltage, VDD -- V 20 25 IT05775 0 --60 --40 --20 0 20 40 60 Ambient Temperature, Ta -- °C 80 100 IT05776 No.7431-3/4 4AM02MH5 RDS(on) -- IOUT 500 PD -- Ta 1.0 Mounted on a ceramic board(600mm2✕0.8mm) Allowable Power Dissipation, PD -- W 450 VDD=5V 400 350 300 250 10V Static Drain-to-Source On-State Resistance, RDS(on) -- Ω Ta=25°C 200 15V 150 100 25V 50 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0 10 20 30 40 50 60 Output Current, IOUT -- mA 70 80 IT05777 0 10 20 30 40 50 60 70 80 Ambient Temperature, Ta -- °C 90 100 IT05778 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2003. Specifications and information herein are subject to change without notice. PS No.7431-4/4