CPH3105 / CPH3205 Ordering number : ENN6084D PNP / NPN Epitaxial Planar Silicon Transistors CPH3105 / CPH3205 High-Current Switching Applications Applications • DC-DC converters relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of FBET, MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. ( ) : CPH3105 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--50)100 V Collector-to-Emitter Voltage VCES (--50)100 V Collector-to-Emitter Voltage VCEO (--)50 V Emitter-to-Base Voltage VEBO (--)6 V (--)3 A Base Current IC ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Collector Current Collector Current (Pulse) (--)6 (--)600 Mounted on a ceramic board (600mm2✕0.8mm) A mA 0.9 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain hFE Conditions VCB=(--)40V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(--)100mA Ratings min typ max 200 Marking : CPH3105 : AE, CPH3205 : CE Unit (--)1 µA (--)1 µA 560 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company http://semicon.sanyo.com/en/network TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62005EA MS IM TB-00001407 / 63004 TS IM TB-00000304 / 41000 TS (KOTO) TA-2926 No.6084-1/5 CPH3105 / CPH3205 Continued from preceding page. Parameter Symbol Gain-Bandwideth Product fT Output Capacitance Ratings Conditions min typ VCE=(--)10V, IC=(--)500mA Cob VCB=(--)10V, f=1MHz VCE(sat)1 Collector-to-Base Breakdown Voltage VCE(sat)2 IC=(--)2A, IB=(--)100mA VBE(sat) IC=(--)2A, IB=(--)100mA IC=(--)10µA, IE=0A Collector-to-Emitter Breakdown Voltage V(BR)CES IC=(--)100µA, RBE=0Ω Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time ton IC=(--)1mA, RBE=∞ IE=(--)10µA, IC=0A See specified test circuit. Storage Time tstg See specified test circuit. tf See specified test circuit. Fall Time Package Dimensions unit : mm 7015-003 pF (--200) mV 80 120 mV (--185) (--500) mV 140 210 mV (--)0.88 (--)1.2 V (--50) V 100 V (--)50 V 100 V (--)50 V (--)6 V (30)35 PW=20µs DC≤1% 0.15 3 ns (230) ns 300 ns (15)22 ns IB1 IB2 OUTPUT 0.2 0.6 INPUT VR 1.6 2.8 0.05 RB + 0.6 50Ω 100µF RL + 470µF 2 1.9 VBE= --5V 2.9 0.2 0.9 0.7 VCC=25V 10IB1= --10IB2=IC=1A (For PNP, the polarity is reversed.) 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 IC -- VCE CPH3105 mA 0 --4 --1.6 CPH3205 mA --30 mA --20 4.5 0mA --1 --8mA --6mA --1.2 --4mA --0.8 IC -- VCE 5.0 Collector Current, IC -- A --2.0 Collector Current, IC -- A MHz Switching Time Test Circuit 0.4 1 MHz 380 (--100) IC=(--)1A, IB=(--)50mA V(BR)CBO (360) (24)13 Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Unit max --2mA --0.4 A 100m 80mA 4.0 60mA 3.5 40mA 3.0 2.5 20mA 2.0 10mA 1.5 5mA 1.0 0.5 IB=0mA 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V --1.0 IT08051 IB=0mA 0 0 0.4 0.8 1.2 1.6 2.0 Collector-to-Emitter Voltage, VCE -- V IT08052 No.6084-2/5 CPH3105 / CPH3205 IC -- VBE 3.0 3.0 CPH3105 VCE= --2V °C 25°C 1.0 0.5 --25°C 1.5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Base-to-Emitter Voltage, VBE -- V 1.0 0 DC Current Gain, hFE Ta=75°C 7 5 3 2 5 2 2 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 5 3 2 100 7 5 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 7 2 0.1 3 5 5 3 2 100 7 5 3 2 3 5 7 0.1 2 3 5 7 1.0 3 Output Capacitance, Cob -- pF 5 IT08058 CPH3205 f=1MHz 7 2 2 Cob -- VCB 100 3 3 CPH3205 VCE=10V Collector Current, IC -- A CPH3105 f=1MHz 5 2 IT08056 f T -- IC IT08057 7 7 1.0 7 2 0.01 5 Cob -- VCB 100 5 Collector Current, IC -- A Gain-Bandwidth Product, f T -- MHz 7 3 3 1000 CPH3105 VCE= --10V 2 2 IT08055 f T -- IC 1000 2 --0.01 10 0.01 3 25°C 7 3 3 --25°C 100 3 2 1.0 IT08054 CPH3205 VCE=2V 5 100 10 --0.01 0.8 7 Ta=75°C 25°C --25°C 2 0.6 hFE -- IC 1000 7 3 0.4 Base-to-Emitter Voltage, VBE -- V CPH3105 VCE= --2V 5 0.2 IT08053 hFE -- IC 1000 DC Current Gain, hFE 1.0 0 0 Gain-Bandwidth Product, f T -- MHz 1.5 0.5 0 Output Capacitance, Cob -- pF 2.0 25°C --25°C 2.0 Ta=75°C Collector Current, IC -- A 2.5 Ta=7 5 Collector Current, IC -- A 2.5 IC -- VBE CPH3205 VCE=2V 5 3 2 10 7 5 3 10 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 IT08059 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 5 7 IT08060 No.6084-3/5 CPH3105 / CPH3205 VCE(sat) -- IC --1000 7 5 3 2 5°C °C --25 7 Ta= 3 2 --10 --0.01 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 2 --100 7 5 °C =75 Ta ° --25 C 3 2 2 3 5 7 --0.1 2 C 25° 3 5 7 --1.0 2 3 10 0.01 2 Ta= --25°C 75°C 25°C 3 2 --100 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 IT08062 100 7 C 75° Ta= °C C --25 25° 5 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 IT08064 VBE(sat) -- IC CPH3205 IC / IB=50 3 2 1000 Ta= --25°C 7 75°C 25°C 5 3 2 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 IT08066 PC -- Ta CPH3105 / CPH3205 0.9 ms 10 DC Collector Dissipation, PC -- W s 10 3 2 s s 0µ 1.0 7 5 0µ 10 50 1m 0m s op era tio n CPH3105 / CPH3205 Ta=25°C Single pulse Mounted on a ceramic board(600mm2✕0.8mm) For PNP, minus sign is omitted. 3 7 1.0 CPH3205 IC / IB=50 1.0 IC=3A 2 5 2 ASO 0.01 0.1 3 3 ICP=6A 3 2 2 5 5 7 --10 IT08065 Collector Current, IC -- A 10 7 5 7 0.1 VCE(sat) -- IC 10 0.01 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 3 5 5 5 CPH3105 IC / IB=50 7 3 Collector Current, IC -- A VBE(sat) -- IC --1000 2 °C C 5° --2 °C 25 2 5 7 --10 IT08063 Collector Current, IC -- A 5 75 = Ta 3 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 7 3 --10 --0.01 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 100 1000 CPH3105 IC / IB=50 --1000 7 5 Collector Current, IC -- A 2 VCE(sat) -- IC --10000 7 5 3 2 3 5 7 --10 IT08061 Collector Current, IC -- A 0.1 7 5 5 C 25° 2 CPH3205 IC / IB=20 7 3 2 --100 7 5 VCE(sat) -- IC 1000 CPH3105 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --10000 7 5 5 7 1.0 2 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V 0.8 M ou nt ed 0.6 on ac er am ic bo ar 0.4 d (6 00 m m2 ✕ 0. 0.2 8m m ) 0 3 5 7 IT08067 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT08068 No.6084-4/5 CPH3105 / CPH3205 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.6084-5/5