SANYO DBA150_00

Ordering number : ENN2222C
DBA150
Diffused Junction Silicon Diode
DBA150
15.0A Single-Phase Bridge Rectifier
Features
•
•
•
•
Package Dimensions
Plastic molded structure.
Glass passivation for high reliability.
Peak reverse voltage : VRM=200, 600V.
Average rectified current : IO=15A.
unit : mm
1170
[DBA150]
7.2
6.35
4.5
2.4
0.8
26.5 max
18
9
11
14.4
26.5 max
25 max
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Peak Reverse Voltage
Average Recitified Current
Symbol
VRM
IO
Surge Forward Current
Junction Temperature
Storage Temperature
Insulation Voltage
IFSM
Tj
Tstg
VIS
Conditions
Ta=40°C
Ta=40°C, with a 270✕270✕3.0mm3 Cu fin
50Hz sine wave, 1 cycle
DBA150C
200
➝
➝
➝
➝
➝
➝
DBA150G
600
4.5
15.0
200
150
--40 to +150
2
Unit
V
A
A
A
°C
°C
kV
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Forward Voltage
Reverse Current
Thermal Resistance
VF
IR
Rth(j-c)
Conditions
min
Ratings
typ
IF=7.5A✻
VR : At each VRM✻
Junction-Case
max
1.05
10
2.3
Unit
V
µA
°C/W
Note : Tightening torque : 0.98N·m max.
Note✻ : Per constituent element of bridge.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
41000 GI IM / 52098 HA (KT) / 82595 GI (KOTO) 3019 TA, TS No.2222-1/2
DBA150
IO -- Ta
12
sis
e,
tiv
10
d
in
Ca
pa
ive
l
oa
d
d
oa
el
tiv
uc
cit
8
6
No fin
Resi
stive
4
, ind
Capa
citive
2
uctiv
e loa
d
load
0
0
20
40
60
80
100
120
140
Ambient Temperature, Ta -- °C
160
ID01175
Surge Foward Current, IFSM -- A
With fin
14
IFSM -- n
240
With a 270✕270✕3mm3
Cu fin
Re
Average Rectified Current, IO -- A
16
200
160
120
50H
z
80
40
0
1.0
2
3
5
7
10
2
3
5
7
Number of Cycles at 50Hz, n
2
100
ID01176
IF -- VF
5
10
C
25°
0°
C
2
Ta
=1
5
Forward Current, IF -- A
3
7
5
3
2
1.0
0.4
0.6
0.8
1.0
Forward Voltage, VF -- V
1.2
1.4
ID01177
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of April, 2000. Specifications and information herein are subject to
change without notice.
PS No.2222-2/2