FDME910PZT P-Channel PowerTrench® MOSFET -20 V, -8 A, 24 mΩ Features General Description This device is designed specifically for battery charging or load switching in cellular handset and other ultraportable applications. It features a MOSFET with low on-state resistance and zener diode protection against ESD. The MicroFET 1.6x1.6 Thin package offers exceptional thermal performance for its physical size and is well suited to switching and linear mode applications. Max rDS(on) = 24 mΩ at VGS = -4.5 V, ID = -8 A Max rDS(on) = 31 mΩ at VGS = -2.5 V, ID = -7 A Max rDS(on) = 45 mΩ at VGS = -1.8 V, ID = -6 A Low profile: 0.55 mm maximum in the new package MicroFET 1.6x1.6 Thin HBM ESD protection level > 2 kV typical (Note 3) Free from halogenated compounds and antimony oxides RoHS Compliant G Bottom Drain Contact D D Pin 1 D 1 6 D D 2 5 D G 3 4 S S D D BOTTOM TOP MicroFET 1.6x1.6 Thin MOSFET Maximum Ratings TA = 25 °C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage -Continuous ID TA = 25°C (Note 1a) -Pulsed PD TJ, TSTG Ratings -20 Units V ±8 V -8 -32 Power Dissipation TA = 25°C (Note 1a) 2.1 Power Dissipation TA = 25°C (Note 1b) 0.7 Operating and Storage Junction Temperature Range -55 to +150 A W °C Thermal Characteristics RθJA Thermal Resistance, Junction to Ambient (Note 1a) 60 RθJA Thermal Resistance, Junction to Ambient (Note 1a) 175 °C/W Package Marking and Ordering Information Device Marking E91 Device FDME910PZT ©2012 Fairchild Semiconductor Corporation FDME910PZT Rev.C Package MicroFET 1.6x1.6 Thin 1 Reel Size 7 ’’ Tape Width 8 mm Quantity 5000 units www.fairchildsemi.com FDME910PZT P-Channel PowerTrench® MOSFET May 2012 Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = -250 μA, VGS = 0 V ΔBVDSS ΔTJ Breakdown Voltage Temperature Coefficient ID = -250 μA, referenced to 25 °C IDSS Zero Gate Voltage Drain Current VDS = -16 V, VGS = 0 V -1 μA IGSS Gate to Source Leakage Current VGS = ±8 V, VDS = 0 V ±10 μA -1.5 V -20 V -16 mV/°C On Characteristics VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = -250 μA ΔVGS(th) ΔTJ Gate to Source Threshold Voltage Temperature Coefficient ID = -250 μA, referenced to 25 °C rDS(on) Static Drain to Source On Resistance gFS Forward Transconductance -0.4 -0.6 2.7 mV/°C VGS = -4.5 V, ID = -8 A 20 24 VGS = -2.5 V, ID = -7 A 25 31 VGS = -1.8 V, ID = -6 A 32 45 VGS = -4.5 V, ID = -8 A,TJ = 125°C 26 36 VDD = -5 V, ID = -8 A 38 mΩ S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = -10 V, VGS = 0 V, f = 1 MHz 1586 2110 pF 236 355 pF 218 330 pF Switching Characteristics td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge Qgs Gate to Source Charge Qgd Gate to Drain “Miller” Charge VDD = -10 V, ID = -8 A, VGS = -4.5 V, RGEN = 6 Ω VGS = -4.5 V, VDD = -10 V, ID = -8 A 9 18 ns 11 20 ns 87 139 ns 46 74 ns 15 21 nC 2.2 nC 3.6 nC Drain-Source Diode Characteristics VSD Source to Drain Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS = 0 V, IS = - 8 A (Note 2) -0.8 -1.2 V VGS = 0 V, IS = -1.8 A (Note 2) -0.7 -1.2 V IF = -8 A, di/dt = 100 A/μs 17 31 ns 4.1 10 nC Notes: 1. RθJA is determined with the device mounted on a 1 in2 pad 2 oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. RθJC is guaranteed by design while RθCA is determined by the user's board design. a. 60 °C/W when mounted on a 1 in2 pad of 2 oz copper. b. 175 °C/W when mounted on a minimum pad of 2 oz copper. 2. Pulse Test: Pulse Width < 300 μs, Duty cycle < 2.0%. 3. The diode connected between the gate and source serves only as protection ESD. No gate overvoltage rating is implied. ©2012 Fairchild Semiconductor Corporation FDME910PZT Rev.C 2 www.fairchildsemi.com FDME910PZT P-Channel PowerTrench® MOSFET Electrical Characteristics TJ = 25 °C unless otherwise noted 32 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 3 -ID, DRAIN CURRENT (A) VGS = -4.5 V VGS = - 3 V 24 VGS = -2.5 V 16 VGS = -1.8 V 8 VGS = -1.5 V PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 0 0 1 2 3 VGS = -1.5 V VGS = -1.8 V 2 VGS = -2.5 V 1 0 0 8 -VDS, DRAIN TO SOURCE VOLTAGE (V) 24 32 Figure 2. Normalized On-Resistance vs Drain Current and Gate Voltage 120 ID = -8 A VGS = -4.5 V rDS(on), DRAIN TO 1.2 1.0 0.8 0.6 -75 -50 SOURCE ON-RESISTANCE (mΩ) 1.4 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 16 -ID, DRAIN CURRENT (A) Figure 1. On Region Characteristics PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX ID = -8 A 80 TJ = 125 oC 40 TJ = 25 oC 0 1.0 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (oC) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 4. On-Resistance vs Gate to Source Voltage Figure 3. Normalized On Resistance vs Junction Temperature 100 -IS, REVERSE DRAIN CURRENT (A) 32 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX -ID, DRAIN CURRENT (A) VGS = -4.5 V VGS = -3 V PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX VDS = -5 V 24 TJ = 150 oC 16 TJ = 25 oC 8 TJ = -55 oC 0 0.5 1.0 1.5 VGS = 0 V 10 TJ = 150 oC 1 TJ = 25 oC 0.1 TJ = -55 oC 0.01 0.001 0.0 2.0 0.2 0.4 0.6 0.8 1.0 -VGS, GATE TO SOURCE VOLTAGE (V) -VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics Figure 6. Source to Drain Diode Forward Voltage vs Source Current ©2012 Fairchild Semiconductor Corporation FDME910PZT Rev.C 3 1.2 www.fairchildsemi.com FDME910PZT P-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25 °C unless otherwise noted 3000 ID = -8 A Ciss VDD = -8 V CAPACITANCE (pF) -VGS, GATE TO SOURCE VOLTAGE (V) 4.5 3.0 VDD = -10 V VDD = -12 V 1.5 1000 Coss Crss f = 1 MHz VGS = 0 V 0.0 0 4 8 12 100 0.1 16 Figure 7. Gate Charge Characteristics -1 20 50 -2 VDS = 0 V 10 -3 -ID, DRAIN CURRENT (A) -Ig, GATE LEAKAGE CURRENT (A) 10 Figure 8. Capacitance vs Drain to Source Voltage 10 10 -4 10 -5 TJ = 125 oC 10 -6 10 -7 10 -8 10 TJ = -9 25 oC 10 1 ms 1 THIS AREA IS LIMITED BY rDS(on) 0.1 10 ms 100 ms SINGLE PULSE TJ = MAX RATED 1s 10 s DC RθJA = 175 oC/W 10 TA = 25 oC -10 10 1 -VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) 0 3 6 9 12 0.01 0.01 15 0.1 1 10 100 -VDS, DRAIN to SOURCE VOLTAGE (V) -VGS, GATE TO SOURCE VOLTAGE (V) Figure 9. Gate Leakage Current vs Gate to Source Voltage Figure 10. Forward Bias Safe Operating Area P(PK), PEAK TRANSIENT POWER (W) 100 SINGLE PULSE o RθJA = 175 C/W o TA = 25 C 10 1 0.1 -3 10 -2 10 -1 0 10 10 1 10 100 1000 t, PULSE WIDTH (sec) Figure 11. Single Pulse Maximum Power Dissipation ©2012 Fairchild Semiconductor Corporation FDME910PZT Rev.C 4 www.fairchildsemi.com FDME910PZT P-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25 °C unless otherwise noted 2 NORMALIZED THERMAL IMPEDANCE, ZθJA 1 0.1 0.01 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 t2 SINGLE PULSE NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZθJA x RθJA + TA o RθJA = 175 C/W (Note 1b) 0.001 -3 10 -2 10 -1 0 10 10 1 10 100 1000 t, RECTANGULAR PULSE DURATION (sec) Figure 12. Junction-to-Ambient Transient Thermal Response Curve ©2012 Fairchild Semiconductor Corporation FDME910PZT Rev.C 5 www.fairchildsemi.com FDME910PZT P-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25 °C unless otherwise noted FDME910PZT P-Channel PowerTrench® MOSFET Dimensional Outline and Pad Layout ©2012 Fairchild Semiconductor Corporation FDME910PZT Rev.C 6 www.fairchildsemi.com tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I61 ©2012 Fairchild Semiconductor Corporation FDME910PZT Rev.C 7 www.fairchildsemi.com FDME910PZT P-Channel PowerTrench® MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. 2Cool™ PowerTrench® F-PFS™ The Power Franchise® ® AccuPower™ PowerXS™ FRFET® Global Power ResourceSM AX-CAP™* Programmable Active Droop™ ® ® Green Bridge™ BitSiC QFET TinyBoost™ Build it Now™ QS™ Green FPS™ TinyBuck™ Green FPS™ e-Series™ CorePLUS™ Quiet Series™ TinyCalc™ Gmax™ CorePOWER™ RapidConfigure™ TinyLogic® GTO™ CROSSVOLT™ ™ TINYOPTO™ IntelliMAX™ CTL™ TinyPower™ ISOPLANAR™ Current Transfer Logic™ Saving our world, 1mW/W/kW at a time™ TinyPWM™ Marking Small Speakers Sound Louder SignalWise™ DEUXPEED® TinyWire™ and Better™ Dual Cool™ SmartMax™ TranSiC® EcoSPARK® MegaBuck™ SMART START™ TriFault Detect™ EfficentMax™ MICROCOUPLER™ Solutions for Your Success™ TRUECURRENT®* ESBC™ MicroFET™ SPM® μSerDes™ STEALTH™ MicroPak™ ® MicroPak2™ SuperFET® ® MillerDrive™ SuperSOT™-3 Fairchild UHC® MotionMax™ SuperSOT™-6 Fairchild Semiconductor® Ultra FRFET™ Motion-SPM™ SuperSOT™-8 FACT Quiet Series™ UniFET™ mWSaver™ SupreMOS® FACT® VCX™ SyncFET™ OptoHiT™ FAST® ® VisualMax™ Sync-Lock™ OPTOLOGIC FastvCore™ ® VoltagePlus™ OPTOPLANAR ®* FETBench™ XS™ FlashWriter® * ® FPS™