SANYO LV8019V_08

Ordering number : ENA0724A
Bi-CMOS IC
Forward/Reverse Motor Driver
LV8019V
Overview
The LV8019V is a forward/reverse motor driver.
Features
• One H-bridge driver channel
• Provides a constant current output
• Built-in thermal shutdown circuit
Specifications
Maximum Ratings at Ta = 25°C and SGND = PGND = 0V
Parameter
Output block supply voltage
Symbol
Conditions
VM max
Ratings
Unit
-0.5 to 8.4
V
V
Control block supply voltage
VCC max
-0.5 to 7.0
Constant current output block
VRG max
-0.5 to 6.0
supply voltage
Maximum output current
IO max
V
1.2
A
IO peak1
t ≤ 200ms, f = 2Hz
3
A
IO peak2
t ≤ 10ms, f = 2Hz
5
A
Input signal voltage
VIN max
Allowable power dissipation
Pd max
When mounted on a circuit board *1
-0.5 to VCC+0.5
A
0.8
W
Operating temperature
Topr
-30 to +85
°C
Storage temperature
Tstg
-55 to +150
°C
*1 Specified circuit board : 114.3 × 76.1 ×
1.6mm3,
glass epoxy
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer' s products or
equipment.
http://semicon.sanyo.com/en/network
22008 MS 20080204-S00006 / 30707 MS PC 20070219-S00003 No.A0724-1/6
LV8019V
Recommended Operating Conditions at Ta = 25°C and SGND = PGND = 0V
Parameter
Symbol
Conditions
Ratings
Unit
Output block supply voltage
VM
3.0 to 7.4
V
Control block supply voltage
VCC
2.7 to 6.0
V
Constant current output block
VRGIN
1.5 to VCC
V
0 to VCC
V
supply voltage
Input signal voltage
VIN
Maximum input signal frequency
fmax
Duty = 50%
100
kHz
Electrical Characteristics Ta = 25°C, VCC = VM = 5V, and SGND = PGND = 0V unless otherwise specified.
Parameter
Symbol
Ratings
Conditions
min
Standby mode output block
IMO
EN = 0V, IN1 = IN2 = ICTRL = 0V
ICCO
EN = 0V, IN1 = IN2 = ICTRL = 0V
typ
Unit
max
1.0
µA
0
1.0
µA
0.8
1.3
mA
current consumption
Control block
Standby
current
mode
consumption
Operation
ICC
EN = 5V
mode
High-level input voltage
VINH
2.5
VCC
V
Low-level input voltage
VINL
0
0.8
V
High-level input current
IINH
1.0
µA
Low-level input current
IINL
High-level EN pin current
IENH
EN pin
Low-level EN pin current
IENL
EN pin
Output on
1
RON1
2
RON2
resistance
µA
-1.0
25
35
µA
1.0
µA
VM = 5V, sink + source
0.45
0.55
Ω
VM = 3V, sink + source
0.60
0.75
Ω
1.05
1.20
15
Ω
ISET setting resistance
RSET
Between ISET pin and SGND
ISET pin voltage
VISET
RSET > 80Ω
CC pin output saturation voltage
VCSAT
RSET > 150Ω *1
1.5
V
CC pin output leakage current
ICONL
CTRL = 0V
1.0
µA
Low voltage shutdown operation
VLVD
VCC pin voltage detection
2.35
2.60
V
0.1
1.0
µs
0.2
2.0
µs
80
0.90
2.10
V
voltage
High-level output turn-on time
TOH
The transition from 10% to 90% of the output
amplitude *2
Low-level output turn-on time
TOL
The transition from 90% to 10% of the output
amplitude *2
Thermal shutdown temperature
Thermal shutdown hysteresis
TSD
*2
∆TSD
*2
150
180
°C
40
°C
*1 : Voltage between CC pin and ISET pin
*2 : Design guarantee: These characteristics are not measured.
No.A0724-2/6
LV8019V
Package Dimensions
unit : mm (typ)
3178B
Allowable power dissipation, Pd max -- W
1.0
5.2
0.5
6.4
9
4.4
16
1
8
0.65
(0.33)
0.15
1.5max
0.22
0.8
Pd max -- Ta
Specified circuit board : 114.3×76.1×1.6mm3
glass epoxy board
Mounted on the specified
circuit board
0.6
0.4
0.2
0
-40 -30 -20
0
20
40
60
8085
0.1 (1.3)
Ambient temperature, Ta -- °C
100
PCA01439
SANYO : SSOP16(225mil)
Block Diagram
OUT1
OUT2
VM
VM
PGND
PGND
PREDRIVE
VCC
LOW VOLTAGE
SHUTDOWN
SGND
CONTROL LOGIC
for H Bridge
CONSTANT
CURRENT
CIRCUIT
ENABLE
EN
TSD
IN1
IN2
ICTRL
ISET
CC
No.A0724-3/6
LV8019V
Truth Table
EN
IN1
IN2
ICTRL
OUT1
OUT2
CC
Mode
H
H
H
X
L
L
X
Break
H
H
L
X
H
L
X
Forward
H
L
H
X
L
H
X
Reverse
H
L
L
X
Z
Z
X
Standby
L
X
X
X
L
L
L
Standby
H
X
X
L
X
X
Z
Constant current
H
X
X
H
X
X
ON
Constant current
output off
output on
H : High level
L : Low level
Z : Hi-impedance
X : Don't care
Pin Assignment and Application Example
1
VM
2
16
OUT2
EN
15
all circuit ON/OFF
(H-bridge,constant currernt)
3
(NC)
IN2
14
H-bridge control1
4
PGND
IN1
13
H-bridge control2
5
PGND
ICTRL
12
constant current control
6
(NC)
ISET
11
7
OUT1
CC
10
M
LV8019V
SGND
150Ω
VM
LED
8
VM
VM
(voltage supply for output)
VCC
9
VCC
(voltage supply for signal)
(package ; SSOP16)
Constant current output
CC
ISET
Constant current resistance
No.A0724-4/6
LV8019V
Pin Functions
Pin No.
Pin
13
IN1
Logic input 1
Description
14
IN2
Logic input 2
Equivalent circuit
VCC
The output is set by the combination of the input 1
and 2 states. See the truth table for details.
12
ICTRL
Controls the output on/off state of the constant
10kΩ
IN1
IN2
ICTRL
current block.
S-GND
15
EN
EN pin.
Controls the on/off state of the H-bridge output
VCC
(OUT1 and OUT2) and the constant current output.
See the truth table for details.
10kΩ
EN
200kΩ
S-GND
7
OUT1
Output 1.
2
OUT2
Output 2.
VM
The source side is a p-channel transistor and sink
side is an n-channel transistor.
OUT*
PGND
10
CC
Constant current output.
11
ISET
Constant current setting.
VCC
The output current (CC) is set by connecting a
resistor between the ISET pin and ground.
CC
SGND
VCC
ISET
SGND
9
VCC
Signal system power supply.
8
VM
Power system power supply.
16
SGND
Signal system ground.
4,5
PGND
Power system ground.
VCC
VM
SGND
PGND
No.A0724-5/6
LV8019V
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of January, 2008. Specifications and information herein are subject
to change without notice.
PS No.A0724-6/6