ITT RMDM-24C4PH1A-A174

Micro-D Metal Shell - .050" Contact Spacing
MDM connectors are used in applications
requiring highly reliable, extremely small, lightweight connectors with higher density contact
configurations than available in traditional rectangular connectors. They are available in 8
shell sizes accommodating from 9 to 100 contacts, and special arrangements of power and
coaxial contacts.
These connectors are designed to meet the rapidly increasing demands for an environmental,
high performance, rugged, moisture-sealed
microminiature connector. This connector
MDM
employs size 24 MICROPINTM/MICROSOCKETTM
contacts on .050 (1.27) centers in a contact
density identical to the standard MICRO-D connector series, but with these additional features:
• Aluminum shells to provide greater
strength, prevent chipping, cracking or
breaking, offer electromagnetic (EMI) and
RFI shielding.
• Silicone elastomer compression interfacial
seal to provide a moisture and humidity
seal between each contact and between
contacts and shell.
Specifications
STANDARD MATERIALS AND FINISHES
MECHANICAL FEATURES
Shell
Coupling
- 6061-T6 Aluminum alloy per
- Friction/jackscrews
QQ-A-200/8, yellow chromate/
Polarization
- Keystone-shaped shells
cadmium, Type II, Class 3 over
Contact Spacing
- .050 (1.27)
electroless nickel per SAE
Centers
AMS-C-26074, Class 4.
- Plug and receptacle
- Liquid Crystal Polymer per MIL-M-24519, Shell Styles
Insulator
Type GLCP-30F (9-100)
No. of Contacts
- 9 thru 100 signal;
5 signal/2 coaxial;
- Glass filled diallyl phthalate per
5 signal/2 power;
MIL-M-14, Type SDGF (7*2 and 24*4)
11 signal/5 coaxial;
- Polyphenylene sulfide per
11 signal/5 power;
MIL-M-24519, Type GST-40F (16*5)
0 signal/10 coaxial;
- Polyester per MIL-M-24519, Type
0 signal/10 power;
GPT-30F (10*10)
20 signal/4 coaxial;
- Copper alloy, gold plate
Contacts
20 signal/4 power
Mounting Hardware - 300 Series stainless steel, passivate
Kit, Jackpost (3) items - 300 Series stainless steel, passivate
- 400 Series stainless stell, passivate
Washer
Standard Epoxy
Coaxial Cable
Wire Size
- RG - 178/U
- #24 thru #32 AWG
Contact Termination - Multiple indent crimp
- Hysol EE4215/HD3561, color black
or Hysol EE4198/HD3561, color green
Performance Data
The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where
applicable. Data is applicable to standard connectors with standard termination. Variations may affect this
data, so please consult customer service for further information on your requirements.
Test
Method
Dielectric Withstanding
Voltage
Method 3001:
600 VAC at sea level
150 VAC at 70,00' altitude
Method 3003
Method 1003. Condition A:
- 55˚C to +125˚C
Method 2004, Condition E:
50 G's, 3 axes, 6 millisecond
duration sawtooth pulse
Method 2005, Condition IV:
20 G's, 10-2,000 Hz. 12 hrs
Insulation Resistance
Thermal Shock
Physical Shock
Vibration
Durability
Moisture Resistance
Salt Spray
Contact Resistance
(MIL-STD-202)
Contact Retention
Criteria of Acceptance
500 cycles of mating and
unmating, 500 CPH max.
Method 1002, Type II, omit steps 7a & 7b
Method 1001, Condition B:
48 hours
Method 1001, Condition B:
At 3 amps
At 1 milliamp
Per MIL-DTL-83513
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
7
No breakdown
No breakdown
5,000 megohms minimum
No physical damage
No physical damage
No loss of continuity > 1 µsec
No physical damage
No loss of continuity > 1 µsec
No mechanical or electrical defects
Insulation resistance > 100 megohms
Shall be capable of mating and unmating,
and meet contact resistance requirements
8 milliohms maximum
10 milliohms maximum
5 lb. minimum axial load
Micro-D Metal Shell - .050" Contact Spacing
MDM
How to Order
For MIL-DTL-83513 ordering information see pages 16 and 17
R
MDM -
51
P
H
001
P
- XXX
RoHS COMPLIANCE
SERIES
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
HARDWARE
SHELL FINISH MOD CODES
SERIES
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
MDM: (Combo Layout) Diallyl Phthalate (DAP)
CONTACT ARRANGEMENTS
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial) or combination of
coax and power
16P5, 10P10, 7P2, 24P4 (power)
}
CONTACT TYPE
S - Socket
P - Pin
TERMINATION TYPE
H - Harness-insulated wire.
L - Solid-uninsulated wire.
S - Solder pot to accept #26 AWG MAX.
harness wire. (Not available with power
contact arrangements.)
HARDWARE
M - Military specification hardware, see
page 11 for military hardware codes.
P - Jackpost
K - Jackscrew-standard profile
L - Jackscrew-low profile
TERMINATION CODE*
(H) 001 - 18",7/34 strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681 System I.
(L) 1 - 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG
gold plated copper.
SHELL FINISH MOD CODES
No Number - (Standard cadmium/yellow
chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
A30 - Black anodize
*See page 79 and 81 for additional Termination codes.
F - Float mount
B - No hardware standard
.091 (2.31) dia. hole for sizes 9-51;
.120 (3.05) dia. hole for size 100.
A - .125 (3.18) dia. mounting holes for sizes 9-51;
.166 (4.22) dia. hole for size 100.
B1 - .1475 (3.75) dia. hole for size 100
(Per MIL-DTL-83513)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
8
Micro-D Metal Shell - .050" Contact Spacing
MDM
COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes
Cannon Modification Code (Not MS)
The following termination codes are listed for your information. For additional codes please refer
to Appendix on page 79 and 81. All wire lengths are minimum.
Solid Uninsulated Type (L)
Harness Type (H)
#25 AWG gold plated copper
#26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded.
All Yellow
H020
H019
H026
H029
H028
H001
H038
H009
H010
H011
H013
H017
H042
Length
3 (76.2)
6 (152.4)
8 (203.2)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
Color Coded*
H027
H016
H034
H025
H002
H003
H023
H004
H005
H006
H048
H046
H041
Termination Code
L61
L56
L57
L39
L58
L1
L14
L2
L7
L6
L16
L10
Length
.125 (3.18)
.150 (3.81)
.190 (4.83)
.250 (6.35)
.375 (9.52)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
* Cavity #1 black
Contact Arrangements
(Face View of Pin insert - Use Reverse Order for Socket Side)
Standard
1
2
6
3
7
4
8
5
1
9
2
9
14
2
3
4
5
6
7
8
9
4
5
6
7
8
1
10 11 12 13 14 15
2
3
10
11 12 13
15 16 17 18 19 20 21 22 23 24
1
25
17
2
3
4
5
6
7
18 19 20 21 22 23
25 Contacts
8
9
10
3
4
5
6
7
2
3
4
9
10
5
6
20 21 22 23
24 25 26 27 28 29 30 31
7
11
8
9
10
11 12 13 14 15 16 17 18 19
24 25 26 27 28 29 30 31 32 33 34 35 36 37
31 Contacts
8
9
13 14 15 16 17 18 19 20 21
37 Contacts
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
2
8
21 Contacts
1
11 12 13 14 15 16
1
1
.043
(1.09)
7
12
15 Contacts
9 Contacts
1
3
.025
(0.64)
TYP.
.050
(1.27)
TYP.
4 5 6
46 47 48 49 50 51
10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
100 Contacts
51 Contacts
Contact identification numbers are for reference only and do not appear on insulator or connector body.
A1
A2
1
2
5
8
3
6
9
4
A3
A4
A5
1
A1
7
10
.714 (18.14)
.460 (11.68)
.320
(8.13)
Coaxial
.103
2
4
11
Size 51 Shell
11 Micro contact
5 Coax or 5 Power
3
A1
A2
A2
A6
A3
A4
A7
A8
www.ittcannon.com
9
2
3
4
5
6
7
A3
A4
9 10 11 12 13
Size 51 Shell
20 Micro contacts
4 Coax or 4 Power
(Not MS)
A5
A9
Size 100 Shell
0 Micro contact
10 Coax or 10 Power
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
1
14 15 16 17 18 19 20
Size 25 Shell
5 Micro contact
2 Coax or 2 Power
A1
A2
8
5
A10
.007
(0.18)
Micro-D Metal Shell - .050" Contact Spacing
MDM
COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to MIL-DTL-83513)
Plug
.110 (2.79)
MAX.
B
.093
(2.36)
REF.
F
D
G
.186 (4.72)
MAX.
.284 (7.21)
MAX.
TWO MTG. HOLES
.091 ±.003(2.31 ±0.08)
E
.200 (5.08)
MAX.
.416 (10.57)
MAX.
C
A
Solder Pot
Receptacle
.110 (2.79)
MAX.
.296 (7.52)
MAX.
TWO MTG. HOLES
.091 ±.003(2.31 ±0.08)
F
E
D
G
.200 (5.08)
MAX.
B
.093
(2.36)
REF.
.429 (10.09)
MAX.
C
A
.198 (5.03)
MAX.
Solder Pot
Receptacle (MDM-100 only)
TWO MTG. HOLES
.120 ±.003(3.05 ±0.08)
G
D
.429 (10.90)
MAX.
.394 (10.01)
MAX.
.198 (5.03)
MAX.
B
.093 (2.36)
REF.
E
.296 (7.52)
MAX.
F
Pigtail termination
C
A
Part Number
By Shell Size
MDM-9P*
A
Max.
.785 (19.94)
B
Max.
.334 (8.48)
C
Max.
.400 (10.16)
D
Max.
.270 (6.86)
E
Max.
.308 (7.82)
F
+_.005
(0.13)
.565 (14.35)
G
Max.
.185 (4.70)
Average Weights**
oz. (gm.) ±5%
.063 (1.79)
MDM-9S*
.785 (19.94)
.402 (10.21)
.400 (10.16)
.270 (6.86)
.308 (7.82)
.565 (14.35)
.253 (6.43)
.063 (1.79)
MDM-15P*
.935 (23.75)
.484 (12.29)
.550 (13.97)
.270 (6.86)
.308 (7.82)
.715 (18.16)
.185 (4.70)
.084 (2.39)
MDM-15S*
.935 (23.75)
.552 (13.97)
.550 (13.97)
.270 (6.86)
.308 (7.82)
.715 (18.16)
.253 (6.43)
.083 (2.37)
MDM-21P*
1.085 (27.56)
.634 (16.10)
.700 (17.78)
.270 (6.86)
.308 (7.82)
.865 (21.97)
.185 (4.70)
.105 (2.99)
MDM-21P*
1.085 (27.56)
.702 (17.83)
.700 (17.78)
.270 (6.86)
.308 (7.82)
.865 (21.97)
.253 (6.43)
.104 (2.97)
MDM-25P*
1.185 (30.10)
.734 (18.64)
.800 (20.32)
.270 (6.86)
.308 (7.82)
.965 (24.51)
.185 (4.70)
.119 (3.39)
MDM-25S*
1.185 (30.10)
.802 (20.37)
.800 (20.32)
.270 (6.86)
.308 (7.82)
.965 (24.51)
.253 (6.43)
.118 (3.36)
MDM-31P*
1.335 (33.91)
.884 (22.45)
.950 (24.13)
.270 (6.86)
.308 (7.82)
1.115 (28.32)
.185 (4.70)
.140 (3.99)
MDM-31S*
1.335 (33.91)
.952 (24.18)
.950 (24.13)
.270 (6.86)
.308 (7.82)
1.115 (28.32)
.253 (6.43)
.139 (3.96)
MDM-37P*
1.485 (37.72)
1.034 (26.26)
1.100 (27.94)
.270 (6.86)
.308 (7.82)
1.265 (32.13)
.185 (4.70)
.161 (4.59)
MDM-37S*
1.485 (37.72)
1.102 (27.99)
1.100 (27.94)
.270 (6.86)
.308 (7.82)
1.265 (32.13)
.253 (6.43)
.160 (4.56)
MDM-51P*
1.435 (36.45)
.984 (24.99)
1.050 (26.67)
.310 (7.87)
.351 (8.92)
1.215 (30.86)
.228 (5.79)
.193 (5.50)
MDM-51S*
1.435 (36.45)
1.052 (26.72)
1.050 (26.67)
.310 (7.87)
.351 (8.92)
1.215 (30.86)
.296 (7.52)
.188 (5.35)
MDM-100P*
2.170 (55.12)
1.384 (35.15)
1.442 (36.63)
.360 (9.14)
.394 (10.01)
1.800 (45.72)
.271 (6.88)
.500 (14.3)
1.442 (36.63)
.360 (9.14)
.394 (10.01)
1.800 (45.72)
.394 (10.01)
***Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails.
1.040 (29.5)
MDM-100S*
2.170 (55.12)
1.508 (38.10)
*Add lead type and length; see How To Order.
Panel Mounting Dimensions (Sizes 9 - 100)
.300 ±.005
(7.62 ±0.13)
.200 ±.005
(5.08 ±0.13)
.395 ±.005
(10.03 ±0.13)
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
10
Micro-D Metal Shell - .050" Contact Spacing
MDM
Panel Cutouts
NOTE: See page 13 for rear panel mounting configuration.
Shell Sizes 9 thru 51
D
TYP.
C
D
TYP.
A
C
.450±.002
(11.43±0.05)
.100 +.005
-.000
(2.54) +0.13 )
R TYP. -0.00
C
.030 (0.76) TYP.
D
B
B
FULL R.
(TYP.)
A
+ +
+ +
FULL R. (TYP.)
.015 (0.38)R.
MAX.(TYP)
26˚/27˚TYP
FULL R.
(TYP.)
Figure 1
Front Mounting
Figure 2
Rear Mounting
PANEL REF.
Figure 3
Edgeboard Mounting
Shell Size 100
.450+_.002
.118
+.005
-.000
1.805
(3.00 +0.13 )
+.005
-.000
(45.85 +0.13 )
-0.00
-0.00
+.005
-.000
(45.85 +0.13
-0.00 )
+.005
-.000
(3.00 +0.13 )
-0.00
.118
.361
1.456
R. MAX (TYP.)
+.004
1.520 -.000
(38.61 +0.10 )
.125
-0.00
)
Figure 1
Front Mounting
NOTES:
1. Front panel mounting is the preferred mounting
method. Front panel mounting dimensions
(figure 1) will accommodate either #2-56 screws
or jackpost hardware.
2. Rear panel mount dimensions (figure 2) will
accommodate #2-56 screw hardware only.
When mounting the connector with rear panel
mount jackpost see the panel cut-out
dimensions.
3. Edgeboard mounting bracket (figure 3) uses #256 screws. Dimension .450+/-.002 (11.43+/0.05) locates the MDM receptacle flush with the
end of the board.
FULL R. (TYP.)
FULL R. (TYP.)
Figure 2
Rear Mounting
PANEL REF.
Figure 3
Edgeboard Mounting
Shell
Size
Cutout
Figure
1
A
+.004
-.000
.408
B
+.004
-.000
.271
C
+.005
-.000
.570
D
+.005
-.000
.089
9
2
.401
.252
.570
.089
3
-
-
.570
.089
1
.558
.271
.720
.089
2
.551
.252
.720
.089
3
-
-
.720
.089
1
.708
.271
.870
.089
2
.701
.252
.870
.089
3
-
-
.870
.089
1
.808
.271
.970
.089
2
.801
.252
.970
.089
3
-
-
.970
.089
1
.958
.271
1.120
.089
2
.951
.252
1.120
.089
3
-
-
1.120
.089
1
1.108
.271
1.270
.089
2
1.101
.252
1.270
.089
3
-
-
1.270
.089
1
1.058
.315
1.220
.089
2
1.051
.295
1.220
.089
3
-
1.220
.089
15
21
25
For 100 Shell Size
NOTES:
1. Front mounting is the preferred mounting
method. Front panel mounting dimensions
(figure 1) will accommodate either #4-40 screws
or jackpost hardware.
2. Rear panel mount dimensions (figure 2) will
accommodate #4-40 screw hardware only see
the panel cut-out dimensions.
3.Edgeboard mounting bracket (figure 3) uses #440 screws. Dimension .450+/-.002 (11.43+/0.05) locates the MDM receptacle flush with the
end of the board.
+ +
-0.00
(3.18
For 9-51 Shell Sizes
+ +
(10.18 +0.10 )
+.004
-.000
(36.98 +0.10 )
-0.00
FULL R. (TYP.)
.118
31
37
51
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
11
+.005
-.000
)
(3.00 +0.13
-0.00
+.004
.401 -.000
)
(9.17 +0.10
-0.00
.015 (0.38)
+.005
-.000
)
(45.85 +0.13
-0.00
(0.76) TYP.
1.805
+.004
-.000
1.805
.030
(11.43+_0.05)
Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (for sizes 9-51)
This hardware supplied unassembled.
LOCK
SCREW
MATING
FACE
#2-56 UNC-2B
RETAINING
CLIP
.408 (10.36)
MAX.
.182 (4.62)
.688 (17.48)
MAX.
MAX.
.185 (4.70) MAX.
CONNECTOR
SHOWN FOR
REF. ONLY
PANEL REF.
.232 (5.89) MAX.
BUSHING
Screw Lock Assembly
#2-56 UNC-2A
.093 (2.36)
RECOMMENDED
PANEL THICKNESS
Jackpost - (P)
Screw Lock Assembly*
*NOTE Torque value is 2.5 in/lbs max.
.052
(1.32) TYP.
.096 ± .005
(2.44 ± 0.13)DIA.
.178 ± .005
(4.52 ± 0.13)
.170
(4.32) MAX.
90˚ Angle Mounting
Bracket
.500
(12.7)
MAX.
#2-56
UNC-2B
THD
.260
(6.60) MAX.
B
A
Description
90˚ Angle Mounting Bracket
Part Number
A
+/-.005 (±0.13)
B
Max.
Screw Lock Assembly
322-9500-000
N/A
Jackpost kit
320-9505-000
N/A
Mounting Bracket 90˚ MDM
015-9516-002
.147 (3.73)
.308 (7.82)
for 9 thru 37 Shell Sizes
Mounting Bracket 90˚ MDM
015-9516-003
.169 (4.29)
.350 (8.89)
for 51 Shell Size
NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit
(320-9505-000) consists of two assmblies, shipped unassmbled.
Jackpost Bushing (for rear panel mounting-for sizes 9-51)
HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS
.170 (4.32)
.185 (4.70)
C
#2-56 UNC-2B THD
MATING FACE
.105 (2.67)
A
.100 (2.54)
.126 (3.20)
R TYP.
.125 (3.18)
DIA. TYP
A
27˚
26˚
.500 (12.7)
TYP
Jackpost diameter within the "A"
dimension is .124/.120 (3.15/3.05).
Plug and Receptacle Dimensions
A
+.004 (0.10)
Shell
-.000 (0.00)
Size
9
.401 (10.19)
15
.551 (14.00)
21
.701 (17.81)
25
.801 (20.34)
31
.951 (24.16)
37
1.101 (27.97)
51
1.051 (26.70)
.480 (12.19)
#2-56 UNC
2A THD
Panel A
Thickness
3/32 (2.4)
1/16 (1.6)
3/64 (1.2)
1/32 (0.8)
B
A
+.005 (0.13)
-.000 (0.00)
.087 (2.21)
.056 (1.42)
.042 (1.07)
.025 (0.64)
Jackpost Kit
Number*
320-9505-007
320-9505-006
320-9505-005
320-9505-004
B
+.004 (0.10)
-.000 (0.00)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.295 (7.49)
C
+_.005 (0.13)
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.34)
1.265 (32.13)
1.215 (30.86)
*A kit consists of 2 jackpost, 2 nuts, 2 washers.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
12
Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (sizes 9-51)
This hardware is factory installed.
MATING
FACE
.014 ± .004
(0.36 ± 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.185 (4.70)
MAX
.150 ± .003
.735 (18.67)
MAX.
CONNECTOR
SHOWN FOR
REF. ONLY
CONNECTOR
SHOWN FOR
REF ONLY
HEX HEAD .050 (1.27) ACROSS FLATS
.050 (1.27) DEEP (REF)
.490
(12.45) MAX
(3.81 ± .076)
.155
(3.94) MAX.
.093
(2.36)
REF.
.090 ± .0015
.031 ± .003
(2.29 ± 0.038)DIA
(0.79 ± 0.08)
MATING
FACE
Float Mount - (F)
#2-56
UNC-2A
MATING
FACE
PART HAS A .040 (1.02)
MAX AXIAL FLOAT
Jackscrew - (K) Standard Profile
Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions
are the same for the float mount and the screw mounting hole configurations. View shown is for standard
float mount front panel mounting. Reverse mounting is available on request.
PART HAS A .040 (1.02)
MAX. AXIAL FLOAT
#2-56 UNC-2A
Jackscrew - (L) Low Profile
* NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-2.5 in-lbs
Standard Jackscrew (K)-2.5 in-lbs
Mounting Hardware to Military Specification (for sizes 9 - 100) per MIL-DTL-83513/5
This hardware supplied in kits unassembled (2 pieces of each item).
#2-56 UNC-2A
THREAD TYP.
PLUG (REF. WITH
.092 (2.34) DIA.
MOUNTING HOLES
#2-56 UNC-2A
THREAD TYP.
.062 (1.57)
HEX. (REF.)
.361 (9.17) MAX.
.390 (9.91) MAX.
SIZE 100 ONLY
PLUG (REF.) WITH
.092 (2.34) DIA.
MOUNTING HOLES
.010 (0.25)
TH'K (REF.)
.010 (0.25)
TH'K (REF.)
POTTING WELL (REF.)
Figure 1. Jackscrew - Low profile
Slotted Head
Size 9-51
Size 100*
Allen head
Optional Head Configuration
Plug and Receptacle
Low and High Profile
Size 9-51
Size 100* (same dimensions)
.868 (22.05) MAX.
.902 (22.91) MAX.
POTTING WELL
(REF.)
Figure 2. Jackscrew - High Profile
Slotted Head
Size 9-51
Size 100*
.125 (3.18) HEX.
.187 (4.75) HEX.
#2-56 UNC-2B THREAD
#4-40 UNC -2A THREAD
.190/.185(4.83/4.70)
.185/.175(4.70/4.44)
.475 ± .025
(12.06 ± 0.64)
SIZE 100 SAME
LOCKWASHER
RETAINING NUT
.154 (3.91) HEX.
.187 (4.75) HEX.
.062 ± .010
(.157 ± 0.25)
SIZE 100 SAME
To order hardware kits separately, order either by M83513/5-** or by 320-950X-XXX.
Size 9-51
Mod Code Part Number
Description
**
Size 100*
Mod Code Part Number
**
Slotted Head Jackscrew Assy Low Profile (Figure 1)
M5 320-9508-025
05
M15 320-9508-021
15
Slotted Head Jackscrew Assy Low Profile (Figure 2)
M6 320-9508-027
06
M16 320-9508-023
16
Allen Head Jackscrew Assy Low Profile (Figure 1)
M2 320-9508-026
02
M12 320-9508-022
12
Allen Head Jackscrew Assy High Profile (Figure 2)
M3 320-9508-028
03
M13 320-9508-024
13
Jackpost Assy (Figure 3)
M7 320-9505-033
07
M17 320-9505-030
17
Figure 3. Jackpost Assembly
Size 9-51
Size 100*
*Size 100 requires B1 size mounting holes for Mil-Spec hardware
Note: Torque values as follows:
Size 9-51 4.0 in-lbs
Size 100 6.0 in-lbs
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
13
Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (for size 100)
This hardware supplied unassembled.
.123 ± .005
(3.12 ± 0.13) DIA.
#4-40 UNC-2B
THD
+.010
#4-40 UNC-2A THD
180 -.005
(4.57 +.025)
PANEL MAY BE USED WITH
.093 (2.36) MAX
THICK PANEL
#4 LOCK WASHER
-0.13
A
.395 (10.03)
MAX.
.500 (12.70)
MAX.
.185 (4.70)
MAX.
MATING SIDE
#4-40 UNC-2B NOTHING OR FEMALE THD
Jackpost - (P)
90˚Angle Mounting
Bracket
B
.064 ± .010
(1.62 ± 0.25) TYP.
.235 ± .005
(5.97 ± 0.13)
Note: Size 100 requires .120 dia (B) mounting hole
when using Commercial (P) jackpost kits.
90° Angle Mounting
Bracket
Part Number
320-9505-015
015-9528-000
Description
Jackpost kit
Mounting Bracket 90˚ MDM
B
Max.
A
± .005 (0.13)
N/A
.191 (4.85)
.370 (9.40)
This hardware is factory installed.
.014 ± .004
(0.36 ± 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.185 (4.70)
MAX
MATING
FACE
.735 (18.67)
MAX.
CONNECTOR
SHOWN FOR
REF. ONLY
.174 ± .005
(4.4 ± .10)
HEX. SOCKET HEAD.
.078 (1.98) ACROSS FLATS
.050 (1.27) MIN. DEPTH
.155 (3.94) MAX.
.093
(2.36)
REF.
.040 (1.02) MAX.
AXIAL FLOAT
.116 ± .002
(2.29 ± .051)
DIA
.031 ± .003
(0.79 ± 0.08)
#4-40
UNC-2A
THD
MATING
FACE
PART HAS A .040 (1.02)
MAX AXIAL FLOAT
MATING SIDE
Jackscrew - (K) Standard
Float Mount - (F) Std.
#4-40 UNC-2A THD
Jackscrew - (L) (Low Profile)
*NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-4.0 in-lbs
Standard Profile Jackscrew (K)-4.0 in-lbs
Jackpost Bushing (for Rear Panel Mounting)
ENGAGING FACE
Dimensions for Rear Panel Mounting
3/16" HEX.
LOCKING POST
1.800 ± .005
(45.72 ± 0.13)
#4-40 UNC-2B
.185 (4.70)
+.004
.401 -.000
(10.18 +1.10 )
-0.00
.170 (4.32)
Panel
Thickness
A
+.005 (0.13)
-.000 (0.00)
Jackpost Kit
Number*
3/32 (2.4)
1/16 (1.6)
1/32 (0.8)
3/64 (1.2)
.087 (2.21)
.058 (1.42)
.025 (0.64)
.042 (1.07)
320-9505-013
320-9505-012
320-9505-010
320-9505-011
A
.500 (12.70)
MAX.
+.004
1.516 -.000
RECEPTACLE SHOWN
FOR REF. ONLY
#4-40 THREAD
RETAINING NUT
+.005
.125 -.000 R
(3.18 +0.13 )
-0.00
.161 (4.09)
.159 (4.04)
DIA.
(38.51 +1.10 )
-0.00
*2 jackposts, 2 nuts, 2 washers
Torque value for size 100
Note: Size 100 requires B mounting hole shell
size when using rear panel mount jackposts
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
14
Micro-D Metal Shell - .050" Contact Spacing
MDM
Connector Saver
Save wear and tear on your equipment and
systems connectors by using the "Connector
Saver".
Simply mate the "Connectors Saver" to your
unit and use the opposite side for your testing
interface...less wear, less tear, less chance of
damage. It is available in all eight standard
MDM layouts. Mating hardware is available
and can be ordered either separately or
included with the connector saver.
The multi-matings and unmatings experienced
by most connectors during testing and final
check out can be eliminated.
.790 (20.07) MAX.
.040 (1.02) MAX. ALLOWABLE
AXIAL FLOAT
#2-56 UNC-2A THD (9-51)
(TYP.)
.315
(8.00)
MAX.
JACKSCREW/JACKPOST BUSHING
(FOR REFERENCE ONLY SEE
ORDERING INFORMATION BELOW.)
MICROSOCKET
MICROPIN
B
CONNECTOR RECEPT
A
CONNECTOR, PLUG
BACKPOTTING, EPOXY
INTERFACIAL SEAL
.185 (4.70) MAX. (TYP.)
.090 (2.29) REF.
(TYP.)
C
.900 (22.86) REF.
E-RING (TYP.)
MDM Size 9 Shown
Size
Electroless Nickel (A174) Plated
With Hardware
W/O Hardware
Cadmium over Nickel (A101) Plated
With Hardware
W/O Hardware
*Hardware Kits
A
Max.
B
± .005 (0.13)
C
Max.
9
MDM98479-86
MDM98479-18
MDM98479-78
MDM-97294-371
320-9505-014**
.785 (19.94)
.565 (14.35)
.308 (7.82)
15
MDM98479-87
MDM98479-19
MDM98479-79
MDM-97294-372
320-9505-014**
.935 (23.75)
.715 (18.16)
.308 (7.82)
21
MDM98479-88
MDM98479-20
MDM98479-80
MDM-97294-373
320-9505-014**
1.085 (27.56)
.865 (21.97)
.308 (7.82)
25
MDM98479-89
MDM98479-21
MDM98479-81
MDM-97294-374
320-9505-014**
1.185 (30.10)
.965 (24.51)
.308 (7.82)
31
MDM98479-90
MDM98479-14
MDM98479-82
MDM-97294-375
320-9505-014**
1.335 (33.91)
1.115 (28.32)
.308 (7.82)
37
MDM98479-91
MDM98479-15
MDM98479-83
MDM-97294-376
320-9505-014**
1.485 (37.72)
1.265 (32.13)
.308 (7.82)
51
MDM98479-92
MDM98479-16
MDM98479-84
MDM-97294-377
320-9505-014**
1.435 (36.45)
1.215 (30.86)
.351 (8.91)
100
MDM98479-93
MDM98479-17
MDM98479-85
MDM-97294-717
320-9508-014***
2.170 (55.12)
1.800 (45.72)
.394 (10.01)
* Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings.
** Size 9-51-#2-56 UNC-2B Thread
*** Size 100-#4-40 UNC-2B Thread
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
15
Micro-D Metal Shell - .050" Contact Spacing
MIL-DTL-83513
How to Order - MIL-DTL-83513 Part Number Nomenclature – Slash Sheets 1-9
M83513/ 01 -
SERIES
MDM MDB
MDVB -
H100 - * *
****
Metal Shell, Liquid Crystal Polymer (LCP)
Diallyl Phthalate Insulator
Polyester Insulator
MIL-C-83513 SLASH SHEET
01
02
03
04
05
06
07
08
09
-
Plug, Connector, Solderpot
Receptacle, Connector, Solderpot
Plug, Connector, Crimp Type
Receptacle, Connector, Crimp Type
7
Hardware Only
Plug, Connector, Solderpot
Receptacle, Connector, Solderpot
Plug, Connector, Crimp Type
Receptacle, Connector, Crimp Type
Metal Shell
Plastic
5
INSERT ARRANGEMENT
A
B
C
D
E
F
G
H
-
METAL SHELL
PLASTIC
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
100 Contact
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
5
WIRE TYPE
No Number - For Solderpot
01 - 18" long, #26 AWG per MIL-W-22759/11-26-9 (all white)
02 - 36" long, #26 AWG per MIL-W-22759/11-26-9 (all white)
03 - 18" long, #26 AWG per MIL-W-22759/11-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
04 - 36" long, #26 AWG per MIL-W-22759/11-26Color Coded per MIL-STD-681, System 1, 10 colors repeating
05 - .5" long. #25 AWG, type S per QQ-W-343,
Gold Plated
06 - 1.0" long, #25 AWG, type S per QQ-W-343,
Gold Plated
07 - .5" long, #25 AWG, type S per QQ-W-W-343,
Tin Plated
08 - 1.0" long, #25 AWG, type S per QQ-W-343,
Tin Plated
09 - 18" long, #26 AWG per MIL-W-22759/33-26-9 (all white)
10 - 36" long, #26 AWG per MIL-W-22759/33-26-9 (all white)
11 - 18" long, #26 AWG per MIL-W-22759/33-26
NOTES:
Color Coded per MIL-STD-681, System 1, 10 colors repeating
1 - For every Mil Spec Part Number, ITT has one corresponding
12 - 36" long, #26 AWG per MIL-W-22759/33-26
part number shown an example
Color Coded per MIL-STD-681, System 1, 10 colors repeating
2 - Tolerance on wire lengths: 18", 36" and 72" long —
13 - 72" long, #26 AWG per MIL-W-22759/11-26-9 (all white)
+1.00"/-0.00"
14 - 72" long, #26 AWG per MIL-W-22759/11-26
.5" and 1.00" — + .200"/-.000"
3 - For space application, connector shell finish must be "A174"
Color Coded per MIL-STD-681, System 1, 10 colors repeating
and wire must be per MIL-W-22759/33-26.
15 - 72" long, #26 AWG per MIL-W-22759/33-26-9 (all white)
4 - Any deviations to these P/N's will result in assignment of a
16 - 72" long, #26 AWG per MIL-W-22759/33-26
special P/N, consult factory.
Color Coded per MIL-STD-681, System 1, 10 colors repeating
Size
100
not
available
in
/
06
through
/
09.
(Plastic
shell)
5
6
-
Color coding in accordance with MIL-STD-681, System 1,
no parenthesis. See page 83 for color code chart.
7
-
For mounting hardware to Military Specification (sizes 9 to 100)
see page 13.
6
6
3
3
3
6
3
6
6
3
3
6
SHELL FINISH
No number - for plastic type connector
C – for Cadmium/Yellow chromate over nickel
N – A174 - Electroless Nickel A174 3
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
16
Micro-D Metal Shell - .050" Contact Spacing
MIL-DTL-83513
How to Order - MIL-DTL-83513 Part Number Nomenclature – Slash Sheets 10-27
M83513/
10 - A
SERIES
Connector, Electrical, Rectangular
Microminiature, Polarized Shell
PC Board Mounting
MIL-C-83513 SLASH SHEET
10 – Connector, Plug, Condensed Board Right Angle (CBR), Sizes 9 – 37
11 – Connector, Plug, CBR, Size 51
12 – Connector, Plug, CBR, Size 100
13 – Connector, Receptacle, CBR, Sizes 9 – 37
14 – Connector, Receptacle, CBR Size 51
15 – Connector, Receptacle, CBR, Size 100
16 – Connector, Plug, Board Right Angle (BR), Sizes 9 – 37
17 – Connector, Plug, BR, Size 51
18 – Connector, Plug, BR, Size 100
19 – Connector, Receptacle, BR, Sizes 9 – 37
20 – Connector, Receptacle, BR Size 51
21 – Connector, Receptacle, BR Size 100
22 – Connector, Plug, Board Straight (BS), Sizes 9 – 37
23 – Connector, Plug, BS, Size 51
24 – Connector, Plug, BS, Size 100
25 – Connector, Receptacle, BS, Sizes 9 – 37
26 – Connector, Receptacle, BS, Size 51
27 – Connector, Receptacle, BS Size 100
INSERT ARRANGEMENT
METAL SHELL
A
B
C
D
E
F
G
H
NOTES:
1
- For every Mil Spec Part Number, ITT has one
2
-
3
-
For space application, connector shell finish must be "N".
4
-
Any deviations to these P/N's will result in assignment
of a special P/N, consult customer service.
corresponding part number
Tolerance on wire lengths ±.015
9 Contact
- 15 Contact
- 21 Contact
- 25 Contact
- 31 Contact
- 37 Contact
- 51 Contact
- 100 Contact
WIRE TYPE
No Number - For Solderpot
01 - .109" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
02 - .140" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
03 - .172" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
SHELL FINISH
No letter - for plastic type connector
C - Cadmium / Yellow chromate over nickel
N - Electroless Nickel
3
3
HARDWARE
N - No jackpost
P - Jackpost (permanently attached)
T - Threaded insert
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
17
2
** C
*