Ordering number : ENN7448A TND304S ExPD (Excellent Power Device) TND304S General Purpose Driver for PDP Sustain Pulse Drive, Motor Drive, Switching Power Supply, DC / DC Converter Applications Preliminary • • • • unit : mm 2199 [TND304S] 8 5 0.3 • Dual inverter. Monolithic structure(High voltage CMOS process adopted). Withstand voltage of 25V is assured. Wide range of operating voltage : 4.5V to 25V. Peak output current : 1A. Fast switching time(25ns typical at 1000pF load). Fully compatible input to TTL/CMOS. (VIH=up to 2.6V, at VDD=4.5 to 25V) 1 4 6.0 • Package Dimensions 4.4 • 0.2 1.8max Features Specifications 0.595 1.27 0.43 0.1 1.5 5.0 1 : NC 2 : IN A 3 : GND 4 : IN B 5 : OUT B 6 : VDD 7 : OUT A 8 : NC SANYO : SOP8 Absolute Maximum Ratings at Ta=25°C Parameter Supply Voltage Symbol Conditions Ratings VDD Input Voltage Allowable Power Dissipation VIN PD max Unit 0 to 25 V GND--0.3 to VDD+0.3 V 0.3 W Junction Temperature Tj --55 to +150 °C Storage Temperature Tstg --55 to +150 °C Recommended Operating Conditions at Ta=25°C Parameter Symbol Conditions Ratings Unit Operating Supply Voltage VDD 4.5 to 25 V Operating Temperature Topr --40 to +125 °C Electrical Characteristics (AC Characteristics) at Ta=25°C, VDD=18V, VIN=5V Parameter Turn-On Rise Time Turn-Off Fall Time Delay Time Symbol Conditions Ratings min typ max Unit tr tf CL=1000pF CL=1000pF 30 45 ns 30 45 ns tD1 tD2 CL=1000pF CL=1000pF 25 40 ns 45 60 ns Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62003 TS IM TA-100711 / 32603 TS IM TA-3958 No.7448-1/4 TND304S Electrical Characteristics (DC Characteristics) at Ta=25°C, VDD=4.5 to 25V Parameter Symbol Logic “1” Input Voltage VIH Logic “0” Input Voltage VIL Input Bias Current High Level Output Voltage Low Level Output Voltage VOL VIN=0 or VDD IO+ IO-- Output Low Short Circuit Pulse Current Output On Resistance typ Unit max ROUT V --1 IO=0A IO=0A Isupp Output High Short Circuit Pulse Current min 2.6 IIN VOH VDD Supply Current Ratings Conditions 0.8 V 1 µA VDD--0.1 V 0.1 V 4.5 mA 0.2 mA VDD=10V, VIN=3V, (both inputs) 1.0 VDD=10V, VIN=0, (both inputs) VDD=18V, PW≤10µs, VOUT=0 1.0 A VDD=18V, PW≤10µs, VOUT=18V 1.0 A VDD=18V, Iload=10mA, VOUT=“H” 8 12 Ω VDD=18V, Iload=10mA, VOUT=“L” 6 10 Ω Block Diagram VDD IN OUT GND Switching Time Test Circuit VDD=18V 4.7µF 0.1µF TND304S INPUT A OUTPUT A 1000pF INPUT B OUTPUT B 1000pF INPUT RISE AND FALL +5V TIMES=5ns +0.4V INPUT 90% 10% tD1 +18V INVERTING OUTPUT tD2 90% 90% 10% 0V tf 10% tr No.7448-2/4 TND304S tr -- Tc 50 VIN=5V CL=1000pF 60 Turn-On Rise Time, tr -- ns Turn-On Rise Time, tr -- ns 45 40 35 30 25 40 30 10 0 50 100 Case Temperature, Tc -- °C 150 0 5 10 40 35 30 25 25 30 IT05639 VIN=5V CL=1000pF Turn-Off Fall Time, tf -- ns VDD=18V VIN=5V CL=1000pF 20 tf -- VDD 60 45 15 Supply Voltage, VDD -- V IT05638 tf -- Tc 50 Turn-Off Fall Time, tf -- ns 50 20 20 15 --50 tr -- VDD 70 VDD=18V VIN=5V CL=1000pF 50 40 30 20 20 15 --50 10 0 50 100 Case Temperature, Tc -- °C 0 35 30 25 20 15 20 25 30 IT05641 tD1 -- VDD 60 VIN=5V CL=1000pF 50 Delay Time, tD1 -- ns 40 10 Supply Voltage, VDD -- V VDD=18V VIN=5V CL=1000pF 45 5 IT05640 tD1 -- Tc 50 Delay Time, tD1 -- ns 150 40 30 20 10 15 10 --50 0 0 50 100 Case Temperature, Tc -- °C 0 70 60 50 40 30 20 15 20 25 30 IT05643 tD2 -- VDD 60 VIN=5V CL=1000pF 50 Delay Time, tD2 -- ns 80 10 Supply Voltage, VDD -- V VDD=18V VIN=5V CL=1000pF 90 5 IT05642 tD2 -- Tc 100 Delay Time, tD2 -- ns 150 40 30 20 10 10 0 --50 0 0 50 100 Case Temperature, Tc -- °C 150 IT05644 0 5 10 15 20 Supply Voltage, VDD -- V 25 30 IT05645 No.7448-3/4 TND304S IO(+) -- Tc 1.2 1.0 0.8 0.6 VDD=18V 1.2 1.0 0.8 0.6 0.4 --50 0 50 100 Case Temperature, Tc -- °C 150 IT05646 0.4 --50 0 50 100 Case Temperature, Tc -- °C 150 IT05647 PD -- Ta 0.40 Allowable Power Dissipation, PD -- W IO(--) -- Tc 1.4 VDD=18V Output "Low" Short Circuit Pulse Current, IO(--) -- A Output "High" Short Circuit Pulse Current, IO(+) -- A 1.4 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT03760 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2003. Specifications and information herein are subject to change without notice. PS No.7448-4/4