UD1006FR Ordering number : ENA1745 SANYO Semiconductors DATA SHEET UD1006FR Diffused Junction Silicon Diode Low VF Switching Diode Features • • VRRM=600V. trr=60ns(typ) (IF=0.5A, IR=1A). • • VF=1.3V max (IF=10A). Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Ratings Surge Forward Current Junction Temperature Tj Storage Temperature Tstg 50Hz resistive load, Sine wave Tc=79°C Tc=25°C (SANYO’s ideal heat dissipation condition) Package limited Sine wave 10ms 1pulse 18 A A --55 to +150 °C • Package : TO-220F-2FS • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50pcs./magazine 4.7 10.16 3.18 Marking 6.68 3.3 2.54 15.87 3.23 A °C Product & Package Information UD1006 FR LOT No. 1.28 2.76 * 12.98 0.8 MAX 15.8 V 10 150 unit : mm (typ) 7532-001 1 V 600 120 Package Dimensions 1.47 MAX 0.8 Unit 600 IO IF(RMS) IFSM R.M.S Forward Current Conditions VRRM VRSM 2 0.5 Electrical Connection part is not a metal * : This but a resin 2 5.08 1 : Cathode 2 : Anode SANYO : TO-220F-2FS 1 http://semicon.sanyo.com/en/network 51910SA TK IM TC-00002308 No. A1745-1/3 UD1006FR Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Reverse Recovery Time Thermal Resistance V trr2 Rth(j-c) IF=0.5A, IR=1A Junction -Case : Smoothed DC 100 1.3 V 100 μA 150 ns 4.9 °C / W 3 5 7 100 IT14892 60 ns Cob -- VR 1000 7 Capacitance, Cob -- pF 25° C 75° C 0.1 7 5 3 2 50°C 25°C --40° C 1.0 7 5 3 2 Ta= 1 0 IFSM -- t 120 IS 20ms t 110 100 90 80 70 2 3 5 7 0.1 2 100 2 3 Time, t -- s 5 7 1.0 2 3 IT14893 2 3 5 7 1.0 2 3 5 7 10 2 Reverse Voltage, VR -- V IT14891 Current waveform 50Hz sine wave 60 0.01 3 5 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 130 5 7 Transient Thermal Resistance Rth(j-c) -- °C / W Forward Current, IF -- A Unit max 1.1 trr1 Forward Voltage, VF -- V Surge Forward Current, IFSM(Peak) -- A typ 600 VR=600V IF=10A, di / dt=100A/μs 10 7 5 3 2 0.01 7 5 3 2 0.001 min IR=1mA IF=10A IF -- VF 5 3 2 Ratings Conditions 7 Rth(j-c) -- t 5 3 2 1.0 7 5 3 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Time, t -- s 2 3 5 IT14894 No. A1745-2/3 UD1006FR Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of May, 2010. Specifications and information herein are subject to change without notice. PS No. A1745-3/3