SEMiX341D16s Absolute Maximum Ratings Symbol Conditions Values Unit A Recitifier Diode Tc = 85 °C 340 Tc = 100 °C 290 A Tj = 25 °C 2500 A Tj = 130 °C 2000 A Tj = 25 °C 31250 A2s Tj = 130 °C 20000 A2s VRSM 1700 V VRRM 1600 V -40 ... 130 °C -40 ... 125 °C 1 min 4000 V 1s 4800 V IFAV IFSM i2t ® SEMiX 13 sin. 180° 10 ms 10 ms Tj Module Bridge Rectifier Module (uncontrolled) Tstg Visol SEMiX341D16s AC sinus 50Hz Characteristics Features Symbol • Terminal height 17 mm • Chips soldered directly to isolated substrate Typical Applications* • Input Bridge Rectifier for AC/DC motor control • power supply Conditions min. typ. max. Unit V Diode VF Tj = 25 °C, IF = 400 A 1.75 V(TO) Tj = 130 °C 0.9 V rT Tj = 130 °C 2.7 mΩ IRD Tj = 130 °C, VRD = VRRM Rth(j-c) per diode Rth(j-c) per diode 4.5 mA K/W K/W sin. 180 0.22 K/W K/W Module Rth(c-s) per chip K/W per module 0.04 K/W Ms to heat sink (M5) 3 5 Nm Mt to terminals (M6) 2.5 5 Nm 5 * 9,81 m/s2 a w 350 g D © by SEMIKRON Rev. 66 – 25.03.2010 1 SEMiX341D16s Fig. 4L: Power dissipation per module vs. direct current Fig. 4R: Power dissipation per module vs. case temperature Fig. 6: Transient thermal impedance vs. time Fig. 7: On-state characteristics 2 Fig. 8: Surge overload current vs. time Rev. 66 – 25.03.2010 © by SEMIKRON SEMiX341D16s spring configuration SEMiX 13 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our personal. © by SEMIKRON Rev. 66 – 25.03.2010 3