1N6138 thru 1N6173 1500W Bipolar Transient Voltage Suppressors POWER DISCRETES Description Features u Low dynamic impedance u 1500 watt peak pulse power u 7.5W continuous at TL = 25°C Quick reference data VBR MIN = 6.12 -180V I(BR) = 5mA - 175mA VRWM = 5.2 - 152V VC (max) = 11V - 286V These products are qualified to MIL-PRF-19500/516 and are preferred parts as listed in MIL-HDBK-5961. They can be supplied fully released as JANTX ,JANTXV and JANS versions. Electrical Specifications Electrical specifications @ TA = 25°C unless otherwise specified. Device Type Minimum Breakdow n Voltage V(BR) @ I(BR) Test Working Current Pk. Reverse I(BR) Voltage VRWM Maximum Reverse Current IR Maximum Clamping Voltage VC @ IP Maximum Pk. Pulse Current IP TP = (1) Temp. Coeff. of V(BR) α (VZ) Maximum Reverse Current IR2 @ 150°C Volts mA Volts µA Volts Amps %/ °C µA 1N6138 6.12 175 5.2 500 11.0 136.4 0.05 12,000 1N6139 6.75 175 5.7 300 11.8 127.1 0.06 3,000 1N6140 7.38 150 6.2 100 12.7 118.1 0.06 2,000 1N6141 8.19 150 6.9 100 14.0 107.1 0.06 1,200 1N6142 9.0 125 7.6 100 15.2 98.7 0.07 800 1N6143 9.9 125 8.4 20 16.3 92.0 0.07 800 1N6144 10.8 100 9.1 20 17.7 84.7 0.07 600 1N6145 11.7 100 9.9 20 19.0 78.9 0.08 600 1N6146 13.5 75 11.4 20 21.9 68.5 0.08 400 1N6147 14.4 75 12.2 20 23.4 64.1 0.08 400 1N6148 16.2 65 13.7 10 26.3 57.0 .085 400 1N6149 18.0 65 15.2 5 29.0 51.7 .085 400 1N6150 19.8 50 16.7 5 31.9 47.0 .085 400 1N6151 21.6 50 18.2 5 34.8 43.1 .09 400 1N6152 24.3 50 20.6 5 39.2 38.3 .09 400 1N6153 27.0 40 22.8 5 43.6 34.4 .09 400 1N6154 29.7 40 25.1 5 47.9 31.3 .095 400 1N6155 32.4 30 27.4 5 52.3 28.7 .095 400 Revision: February 2010 1 www.semtech.com 1N6138 thru 1N6173 POWER DISCRETES Electrical Specifications Electrical specifications @ TA = 25°C unless otherwise specified. Device Type Minimum Breakdow n Voltage V(BR) @ I(BR) Test Working Current Pk. Reverse I(BR) Voltage VRWM Maximum Reverse Current IR1 Maximum Clamping Voltage VC @ IP Maximum Pk. Pulse Current IP TP = (1) Temp. Coeff. of V(BR) α (VZ) Maximum Reverse Current IR2 @ 150°C Volts mA Volts µA Volts Amps %/ °C µA 1N6156 35.1 30 29.7 5 56.2 26.7 0.095 400 1N6157 38.7 30 32.7 5 62.0 24.2 0.095 400 1N6158 42.3 25 35.8 5 67.7 22.2 0.095 400 1N6159 45.9 25 38.8 5 73.5 20.4 0.095 400 1N6160 50.4 20 42.6 5 80.7 18.6 0.095 400 1N6161 55.8 20 47.1 5 89.3 16.8 .100 400 1N6162 61.2 20 51.7 5 98.0 15.3 .100 400 1N6163 67.5 20 56.0 5 108.1 13.9 .100 400 1N6164 73.8 15 62.2 5 118.2 12.7 .100 400 1N6165 81.9 15 69.2 5 131.1 11.4 .100 400 1N6166 90.0 12 76.0 5 144.1 10.4 .100 400 1N6167 99.0 12 83.6 5 158.5 9.5 .100 400 1N6168 108.0 10 91.2 5 172.9 8.7 .100 400 1N6169 117.0 10 98.8 5 187.3 8.0 .100 400 1N6170 135.0 8 114.0 5 216.2 6.9 .100 400 1N6171 144.0 8 121.6 5 228.8 6.6 .100 400 1N6172 162.0 5 136.8 5 257.4 5.8 .100 400 1N6173 180.0 5 152.0 5 286.0 5.2 .100 400 Note: (1) See Figure 4 graph. 2010 Semtech Corp. 2 www.semtech.com 1N6138 thru 1N6173 POWER DISCRETES Typical Characteristics Figure 1. Maximum power vs. lead temperature Figure 2. Steady state derating characteristic for free air mounting 2010 Semtech Corp. 3 www.semtech.com 1N6138 thru 1N6173 POWER DISCRETES Typical Characteristics Figure 3. Peak pulse power vs. pulse time Figure 4. Pulse waveform 2010 Semtech Corp. Figure 5. Pulse derating curve 4 www.semtech.com 1N6138 thru 1N6173 POWER DISCRETES Ordering Information Part Number Description 1N6138 thru 1N6173 Axial leaded hermetically sealed(1) Note: (1) Available in bulk and tape and reel packaging. Please consult factory for quantities. Outline Drawing Dimensions Inches DIMN Millimeters Note MIN MAX MIN MAX A .135 0.185 3.4 4.7 - B .90 1.30 22.9 33.0 - C .140 .195 3.5 5.0 - D - .030 - .80 1 E 0.036 .042 .91 1.07 - Note: (1) Lead diameter uncontrolled over this region. Contact Information Semtech Corporation Power Discretes Products Division 200 Flynn Road, Camarillo, CA 93012 Phone: (805)498-2111 FAX (805)498-3804 2010 Semtech Corp. 5 www.semtech.com