E L E C T R O N I C MUR860T Ultrafast Rectifier - 8Amp 600Volt □ Features -Epoxy Meets UL 94V-0 -Higjt Voltage Capability -Low Leakage Current -High Temperature Glass Passivated Junction -Pb-Free Packages is Available □ Mechanical Characteristics -Case: Epoxy, Molded -Weight: 1.9 grames(Approximately) -Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable -Lead Temperature for Soldering Purposes: 260 ºC Max for 10 Seconds □ Maximum ratings Rating Symbol Value Unit Peak Repetitive Reverse Voltage VRRM 600 V Average Rectified Forward Current Total Device(Rated VR), TC = 150 ºC IF(AV) 8 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20kHZ), TC = 150 ºC IFM 16 A Nonrepetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60HZ) IFSM 100 A Operating Junction Temperature and Storage Temperature Range TJ, Tstg -65 to +175 ºC Rating Symbol Value Unit Maximum Instantaneous Forward Voltage (Note 1) IF = 8.0A, TC = 150 ºC IF = 8.0A, TC = 25 ºC VF 1.2 1.5 V Maximum Instantaneous Reverse Current (Note 1) Rated DC Voltage, TJ = 150 ºC Rated DC Voltage, TJ = 25 ºC IR 500 10 μA Maximum Reverse Recovery Time IF = 1.0A, di/dt = 50A/μs trr 25 ns Maximum Thermal Resistance, Junction-to-Case RθJC 2.0 ºC/W □ Electrical characteristics Note: 1.Pulse Test : Pulse Width = 300μs, Duty Cycle ≦ 2.0% http:// www.sirectsemi.com August 2007 / Rev.5 1 MUR860T 1000 Tj = 150 oC IR, REVERSE CURRENT (µA) 100 70 50 100 oC 10 25 oC 1.0 oC 0.1 25 10 0 10 oC 15 0 oC 20 Tj = 7.0 0.01 100 5.0 200 300 400 500 600 VR, REVERSE VOLTAGE (VOLTS) 3.0 Figure 2. Typical Reverse Current 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage IF(AV), AVERAGE FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 30 100 10 9.0 RATED VR APPLIED 8.0 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 130 140 150 160 170 180 TC, CASE TEMPERATURE (oC) 9.0 RθJA = 16 oC/W dc RθJA = 60 oC/W 8.0 14 (NOT HEAT SINK) 7.0 6.0 5.0 SQUARE WAVE 4.0 dc 3.0 2.0 SQUARE WAVE 1.0 0 0 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (oC) Figure 4. Current Derating, Ambient 180 200 PF(AV), AVERAGE POWER DISSIPATION (WATTS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 3. Current Derating, Case 10 13 12 11 SQUARE WAVE 10 9.0 8.0 dc 7.0 6.0 5.0 4.0 3.0 Tj = 175 oC 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation http:// www.sirectsemi.com 2 10 MUR860T r(t), TRANSIENT THERMAL RESISTANCE 1 D = 0.5 0.5 0.1 0.05 ZθJC(t) = r(t)RθJC 0.1 PPK RθJC = 1.5oC/W MAX 0.01 0.05 D CURVES APPLY FOR POWER t1 PULSE TRAIN SHOWN t2 READ TIME AT T1 SINGLE PULSE DUTY CYCLE, D = t1/t2 TJ(pk) – TC = P(pk)ZθJC(t) 0.01 0.01 0.05 0.1 0.5 1 5 10 50 100 500 1000 t, TIME (ms) Figure 6. Thermal Response 1000 C, CAPACITANCE, (pF) 500 Tj = 25 oC 200 100 50 20 10 1.0 5.0 10 50 100 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Capacitance http:// www.sirectsemi.com 3 MUR860T TO-220AC PACKAGE K DIM A B C D E F G H I J K L M N O A DIMENSIONS INCHES MM MIN MAX MIN MAX .579 .602 14.70 15.30 .392 .411 9.95 10.45 .104 .116 2.65 2.95 .248 .264 6.30 6.70 .325 .344 8.25 8.75 .126 .138 3.20 3.50 .524 .547 13.30 13.90 .096 .108 2.45 2.75 .030 .035 0.75 0.90 .013 .020 0.35 0.50 .146 .157 3.70 4.00 .171 .187 4.35 4.75 .049 .057 1.25 1.45 .102 .114 2.60 2.90 .047 .055 1.20 1.40 NOTE Sirectifier Global Corp., Delaware, U.S.A. U.S.A.: [email protected] France: [email protected] Taiwan: [email protected] Hong Kong: [email protected] China: [email protected] …Thailand: [email protected] Philippines: [email protected] Belize: [email protected] http:// www.sirectsemi.com 4