SHANGHAI SUNRISE ELECTRONICS CO., LTD. S2A THRU S2M SURFACE MOUNT GLASS PASSIVATED RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 2.0A FEATURES SMB/DO-214AA B • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • High temperature soldering guaranteed: 260oC/10sec/at terminal A C D F G MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode A B MAX. .155(3.94) .180(4.57) MIN. .130(3.30) .160(4.06) E F MAX. .220(5.59) .096(2.44) MIN. .205(5.21) .084(2.13) H C D .083(2.11) .012(0.305) .077(1.96) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL S2A S2B S2D S2G S2J S2K S2M UNITS VRRM VRMS VDC Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (TL=110oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) o Ta=125 C 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 V V V IF(AV) 2.0 A IFSM 60 A VF 1.1 V 5.0 µA 200 µA IR 30 CJ Typical Junction Capacitance (Note 1) 16 Typical Thermal Resistance (Note 2) Rθ(ja) -65 to +150 TSTG,TJ Storage and Operation Junction Temperature Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area pF o C/W o C http://www.sse-diode.com