2STD1360 2STF1360 - 2STN1360 Low voltage fast-switching NPN power transistors Features ■ Very low collector-emitter saturation voltage ■ High current gain characteristic ■ 4 4 Fast-switching speed 1 Emergency lighting ■ LED ■ Voltage regulation ■ Relay drive 3 2 1 SOT-223 Applications ■ 2 3 SOT-89 TAB 3 1 TO-252 (DPAK) Description Figure 1. Internal schematic diagram The devices are NPN transistors manufactured using new “PB-HDC” (power bipolar high density current) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. The complementary PNP types are the 2STD2360T4, the 2STF2360 and the 2STN2360. Table 1. Device summary Order codes Marking Packages Packaging 2STD1360T4 D1360 DPAK Tape and reel 2STF1360 1360 SOT-89 Tape and reel 2STN1360 N1360 SOT-223 Tape and reel October 2009 Doc ID 11783 Rev 2 1/11 www.st.com 11 Absolute maximum ratings 1 2STD1360, 2STF1360, 2STN1360 Absolute maximum ratings Table 2. Absolute maximum ratings Value Symbol Parameter 2STD1360 2STF1360 2STN1360 DPAK SOT-223 VCBO Collector-base voltage (IE = 0) 80 V VCEO Collector-emitter voltage (IB = 0) 60 V VEBO Emitter-base voltage 6 V Collector current 3 A Collector peak current (tP < 5 ms) 5 A Base current 0.2 A Base peak current (tP < 5 ms) 0.4 A IC ICM IB IBM (IC = 0) PTOT Total dissipation at Tamb = 25 °C Tstg Storage temperature TJ Table 3. Symbol RthJA(1) 15 1.4 1.6 W -65 to 150 °C 150 °C Max. operating junction temperature Thermal data Parameter Thermal resistance junction-ambient ___ _Max 1. Device mounted on a PCB area of 1 cm2 2/11 SOT-89 Unit Doc ID 11783 Rev 2 DPAK SOT-89 SOT-223 Unit 8.3 89 78 °C/W 2STD1360, 2STF1360, 2STN1360 2 Electrical characteristics Electrical characteristics TCASE = 25°C; unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICBO Collector cut-off current (IE = 0) VCB = 80 V 100 nA IEBO Emitter cut-off current (IC = 0) VEB = 6 V 100 nA Base-emitter on voltage VCE = 2 V IC = 100 mA 650 730 mV VCE(sat)(1) Collector-emitter saturation voltage IC = 2 A IC = 3 A _ IB = 100 mA IB = 150 mA 130 180 300 500 mV mV VBE(sat) (1) Base-emitter saturation voltage IC = 2 A _ IB = 100 mA 0.9 1.2 V DC current gain IC = 100 mA_ VCE = 2 V IC = 1 A _ VCE = 2 V td tr ts tf Resistive load Delay time Rise time Storage time Fall time VCC = 10 V IC = 3 A IB(on) = - IB(off) = 300 mA VBE(off) = - 5 V fT Transition frequency IC = 0.1 A __ VCE = 10 V VBE(on) hFE(1) 630 80 160 400 17 20 ns 81 100 ns 620 720 ns 54 65 ns 130 MHz 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % 2.1 Typical characteristics (curves) Figure 2. DC current gain (VCE = 5 V) Figure 3. Doc ID 11783 Rev 2 DC current gain (VCE = 2 V) 3/11 Electrical characteristics 2STD1360, 2STF1360, 2STN1360 Figure 4. Collector emitter saturation voltage Figure 5. Base emitter saturation voltage Figure 6. Resistive load switching on Resistive load switching off Figure 8. Capacitance Figure 7. C1000 (pF) CEB f = 1 MHz 100 CCB 10 0.1 4/11 1 10 VR100 (V) Doc ID 11783 Rev 2 2STD1360, 2STF1360, 2STN1360 2.2 Electrical characteristics Test circuits Figure 9. Resistive load switching 1. Fast electronic switch 2. Non-inductive resistor Doc ID 11783 Rev 2 5/11 Package mechanical data 3 2STD1360, 2STF1360, 2STN1360 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 6/11 Doc ID 11783 Rev 2 2STD1360, 2STF1360, 2STN1360 Package mechanical data TO-252 (DPAK) mechanical data DIM. mm. min. ty p ma x . A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4. 70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 1 R V2 0.20 8o 0o 0068772_G Doc ID 11783 Rev 2 7/11 Package mechanical data 2STD1360, 2STF1360, 2STN1360 SOT-89 mechanical data mm Dim. Min. Typ. Max. A 1.40 1.60 B 0.44 0.56 B1 0.36 0.48 C 0.35 0.44 C1 0.35 0.44 D 4.40 4.60 D1 1.62 1.83 E 2.29 2.60 e 1.42 1.57 e1 2.92 3.07 H 3.94 4.25 K 1° 8° L 0.89 R 1.20 0.25 7098166_C 8/11 Doc ID 11783 Rev 2 2STD1360, 2STF1360, 2STN1360 Package mechanical data SOT-223 mechanical data mm. DIM. min. typ A max. 1.80 A1 0.02 0.1 B 0.60 0.70 0.85 B1 2.90 3.00 3.15 c 0.24 0.26 0.35 D 6.30 6.50 6.70 e 2.30 e1 4.60 E 3.30 3.50 3.70 H 6.70 7.00 7.30 10 o V 0046067_L Doc ID 11783 Rev 2 9/11 Revision history 4 2STD1360, 2STF1360, 2STN1360 Revision history Table 5. 10/11 Document revision history Date Revision Changes 21-Nov-2005 1 Initial release 09-Oct-2009 2 Added 2STD1360T4 in TO-252 (DPAK) package Doc ID 11783 Rev 2 2STD1360, 2STF1360, 2STN1360 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 11783 Rev 2 11/11