STMICROELECTRONICS STD16NF06L-1

STD16NF06L
STD16NF06L-1
N-channel 60V - 0.060Ω - 24A - DPAK/IPAK
STripFET™ II Power MOSFET
General features
Type
VDSS
RDS(on)
ID
STD16NF06L-1
60V
<0.070Ω
24A
STD16NF06L
60V
<0.070Ω
24A
■
Logic level device
■
Low threshold drive
3
3
2
1
iPAK
1
DPAK
Description
This Power MOSFET is the latest development of
STMicroelectronics unique "Single Feature
Size™" strip-based process. The resulting
transistor shows extremely high packing density
for low on-resistance, rugged avalanche
characteristics and less critical alignment steps
therefore a remarkable manufacturing
reproducibility.
Internal schematic diagram
Applications
■
Switching application
Order codes
Part number
Marking
Package
Packaging
STD16NF06L-1
D16NF06L
IPAK
Tube
STD16NF06LT4
D16NF06L
DPAK
Tape & reel
February 2007
Rev 5
1/14
www.st.com
14
Contents
STD16NF06L - STD16NF06L-1
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................. 6
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5
Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
................................................ 8
STD16NF06L - STD16NF06L-1
1
Electrical ratings
Electrical ratings
Table 1.
Absolute maximum ratings
Symbol
VDS
VDGR
VGS
Parameter
Value
Unit
Drain-source voltage (VGS = 0)
60
V
Drain-gate voltage (RGS = 20 kΩ)
60
V
± 18
V
Gate- source voltage
ID
Drain current (continuous) at TC = 25°C
24
A
ID
Drain current (continuous) at TC = 100°C
17
A
Drain current (pulsed)
96
A
Total dissipation at TC = 25°C
40
W
Derating Factor
0.27
W/°C
Peak diode recovery avalanche energy
11.5
V/ns
Single pulse avalanche energy
200
mJ
-55 to 175
°C
IDM
(1)
Ptot
dv/dt(2)
EAS
(3)
Tstg
Tj
Storage temperature
Max. operating junction temperature
1. Pulse width limited by safe operating area.
2. ISD ≤16A, di/dt ≤200A/µs, VDD =V(BR)DSS, Tj ≤TJMAX
3. Starting Tj = 25 °C, ID = 20A, VDD = 48V
Table 2.
Thermal data
Rthj-case
Thermal resistance junction-case max
Rthj-pcb
Thermal resistance junction-to PCB max
TJ
Maximum lead temperature for soldering purpose
(1)
3.75
°C/W
62
°C/W
300
°C
1. When Mounted on 1 inch2 FR-4 board, 2 oz. of Cu.
3/14
Electrical characteristics
2
STD16NF06L - STD16NF06L-1
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3.
On/off states
Symbol
Parameter
V(BR)DSS
Drain-source
breakdown voltage
ID = 250µA, VGS =0
IDSS
Zero gate voltage
drain current (VGS = 0)
VDS = Max rating
VDS = Max rating,
TC = 125°C
IGSS
Gate-body leakage
current (VDS = 0)
VGS = ± 18V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250µA
RDS(on)
Static drain-source on
resistance
VGS = 10V, ID = 8A
VGS = 5V, ID = 8A
Table 4.
Symbol
Test conditions
Typ.
Max.
60
Unit
V
1
10
µA
µA
±100
nA
1
V
0.060
0.070
0.070
0.085
Ω
Ω
Typ.
Max.
Unit
Dynamic
Parameter
Test conditions
Min.
gfs (1)
Forward
transconductance
VDS = 15V, ID = 12A
12
S
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS = 25V, f = 1MHz,
VGS = 0
370
69
30
pF
pF
pF
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
Turn-off delay time
Fall time
VDD = 30V, ID = 8A
RG = 4.7Ω VGS = 5V
(see Figure 13)
12
30
20
6
ns
ns
ns
ns
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 30V, ID = 8A,
VGS = 5V, RG = 4.7Ω
(see Figure 14)
7.5
2.5
4.2
nC
nC
nC
1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%.
4/14
Min.
STD16NF06L - STD16NF06L-1
Table 5.
Symbol
Source drain diode
Parameter
ISDM (1)
Source-drain current
Source-drain current
(pulsed)
VSD (2)
Forward on voltage
ISD
trr
Qrr
IRRM
Electrical characteristics
Test conditions
Min.
Typ.
ISD = 16A, VGS = 0
Reverse recovery time
ISD = 16A, di/dt = 100A/µs,
Reverse recovery charge VDD = 25V, Tj = 150°C
Reverse recovery current (see Figure 15)
53
85
3.2
Max.
Unit
16
64
A
A
1.5
V
ns
µC
A
1. Pulse width limited by safe operating area.
2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%
5/14
Electrical characteristics
STD16NF06L - STD16NF06L-1
2.1
Electrical characteristics (curves)
Figure 1.
Safe operating area
Figure 2.
Thermal impedance
Figure 3.
Output characteristics
Figure 4.
Transfer characteristics
Figure 5.
Transconductance
Figure 6.
Static drain-source on resistance
6/14
STD16NF06L - STD16NF06L-1
Electrical characteristics
Figure 7.
Gate charge vs. gate-source voltage Figure 8.
Figure 9.
Normalized gate threshold voltage
vs. temperature
Figure 11. Source-drain diode forward
characteristics
Capacitance variations
Figure 10. Normalized on resistance vs.
temperature
Figure 12. Normalized breakdown voltage vs.
temperature
7/14
Test circuit
3
STD16NF06L - STD16NF06L-1
Test circuit
Figure 13. Switching times test circuit for
resistive load
Figure 14. Gate charge test circuit
Figure 15. Test circuit for inductive load
Figure 16. Unclamped Inductive load test
switching and diode recovery times
circuit
Figure 17. Unclamped inductive waveform
8/14
Figure 18. Switching time waveform
STD16NF06L - STD16NF06L-1
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/14
Package mechanical data
STD16NF06L - STD16NF06L-1
TO-251 (IPAK) MECHANICAL DATA
mm
DIM.
MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
2.2
2.4
0.086
0.094
A1
0.9
1.1
0.035
0.043
A3
0.7
1.3
0.027
0.051
B
0.64
0.9
0.025
0.031
B2
5.2
5.4
0.204
0.212
B3
0.85
B5
0.033
0.3
0.012
B6
0.95
C
0.45
C2
0.48
D
6
E
6.4
6.6
0.037
0.6
0.017
0.023
0.6
0.019
0.023
6.2
0.236
0.244
0.252
0.260
G
4.4
4.6
0.173
0.181
H
15.9
16.3
0.626
0.641
L
9
9.4
0.354
0.370
L1
0.8
1.2
0.031
0.047
L2
0.8
1
0.031
0.039
A1
C2
A3
A
C
H
B
B3
=
1
=
2
G
=
=
=
E
B2
=
3
B5
L
D
B6
L2
L1
0068771-E
10/14
STD16NF06L - STD16NF06L-1
Package mechanical data
DPAK MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
A1
A2
B
b4
2.2
0.9
0.03
0.64
5.2
2.4
1.1
0.23
0.9
5.4
0.086
0.035
0.001
0.025
0.204
0.094
0.043
0.009
0.035
0.212
C
C2
D
D1
E
E1
e
e1
H
L
(L1)
L2
L4
R
V2
0.45
0.48
6
0.6
0.6
6.2
0.017
0.019
0.236
0.023
0.023
0.244
6.6
0.252
5.1
6.4
0.200
4.7
2.28
4.4
9.35
1
4.6
10.1
0.173
0.368
0.039
2.8
0.8
0.6
0.181
0.397
0.110
0.031
1
0.023
0.2
0°
0.260
0.185
0.090
0.039
0.008
8°
0°
8°
0068772-F
11/14
Packing mechanical data
5
STD16NF06L - STD16NF06L-1
Packing mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
16.4
N
50
T
TAPE MECHANICAL DATA
DIM.
mm
MIN.
MAX.
A0
6.8
7
0.267 0.275
B0
10.4
10.6
0.409 0.417
B1
D
12/14
inch
1.5
D1
1.5
E
1.65
MIN.
MAX.
12.1
0.476
1.6
0.059 0.063
1.85
0.065 0.073
0.059
F
7.4
7.6
0.291 0.299
K0
2.55
2.75
0.100 0.108
0.153 0.161
P0
3.9
4.1
P1
7.9
8.1
0.311 0.319
P2
1.9
2.1
0.075 0.082
R
40
W
15.7
1.574
16.3
0.618
0.641
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
18.4
0.645 0.724
0.059
0.795
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
2500
STD16NF06L - STD16NF06L-1
6
Revision history
Revision history
Table 6.
Revision history
Date
Revision
Changes
28-Feb-2005
1
Initial release
03-Mar-2005
2
Preliminary version
29-Nov-2005
3
Added package IPAK
03-Jul-2006
4
New template, no content change
19-Feb-2007
5
Typo mistake on page 1
13/14
STD16NF06L - STD16NF06L-1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
14/14