FAIRCHILD FSAV433MTCX_11

FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1
Video Switch
Features
Description

Ground between Channels to Optimize Isolation
and Reduce Hostile Crosstalk




-70dB Non-Adjacent Channel Crosstalk at 30MHz
The FSAV433 is an ultra-low power, high-bandwidth
video switch specially designed for switching three
analog video signals, including computer RGB and highdefinition YPbPr signals. The wide bandwidth (550MHz)
of the switch allows signal passage with minimum edge
and phase distortion, while −70dB non-adjacent channel
crosstalk generates negligible image noise between
active channels. Optimized differential gain and phases
maintain the image integrity of video applications, while
low on resistance offers low signal insertion loss.
On Resistance: 6.5Ω (Typical)
-3dB Bandwidth: 550MHz
Low Power Consumption: 1µA (Maximum)
Applications

RGB Video Switch in LCD, Plasma and Projector
Displays

DVD-RW
The Fairchild switch family derives from and embodies
Fairchild’s proven switch technology used for years in its
74LVX3L384 (FST3384) bus switch product.
Ordering Information
Part Number
Operating
Temperature Range
FSAV433MTCX
-40 to +85°C
Package
20-Lead, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
Packing
Method
Tape and Reel
Figure 1. Typical Application Diagram
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
www.fairchildsemi.com
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
January 2011
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
Pin Configurations
Figure 2. Analog Symbol
Figure 3. TSSOP Pin Assignments (Top Through View)
Pin Descriptions
Pin #
Name
Description
1, 2, 3, 5, 6, 7, 9, 10, 11
1B1, 2B2, 3B2
4, 8, 12, 14 ,16
GND
13, 15, 17
1A, 2A, 3A
18, 19
S1, S2
20
VCC
S1
S2
Function
LOW
LOW
Disconnected
Bus B
Ground
Bus A
Select Input
Supply Voltage
Truth Table
LOW
HIGH
A=B1
HIGH
LOW
A=B2
HIGH
HIGH
A=B3
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
-0.5
+4.6
V
VCC
Supply Voltage
VS
DC Switch Voltage
-0.5
VCC+0.5
V
VIN
(1)
DC Input Voltage
-0.5
+4.6
V
IIK
DC Input Diode Current, VIN< 0V
-50
IOUT
ICC/IGND
mA
DC Output Sink Current
100
mA
DC VCC / GND Current
±100
mA
+150
°C
7000
V
TSTG
Storage Temperature Range
ESD
Human Body Model, JESD22-A114
-65
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Power Supply Operating
VIN
Input Voltage
TA
Operating Temperature, Free Air
Min.
Max.
Unit
2.3
3.6
V
0
VCC
V
-40
+85
°C
Note:
2. Unused control inputs must be held HIGH or LOW; they may not float.
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
Absolute Maximum Ratings
DC Electrical Characteristics
Typical values are at TA= +25°C.
Symbol
VANALOG
VIK
Parameter
Analog Signal Range
Clamp Diode Voltage
VIH
High-Level Input Voltage
VIL
Low-Level Input Voltage
II
IOFF
Conditions
2.3 to 3.0
3.0
2.3
3.0 to 3.6
2.3
3.0 to 3.6
3.6
IIN=-18mA
Input Leakage Current
0  VIN  3.6V
Off-State Leakage Current
0  A, B  VCC, See Figure 9
VIN=1.0V, ION=13mA,
See Figure 7
RON
Switch On Resistance(3)
ICC
Quiescent Supply Current
ICCT
Increase in ICC per Input
VCC (V)
VIN=2.0V, ION=26mA,
See Figure 7
VIN=VCC or GND, IOUT=0
One Control Input at 3.0V
Other Inputs at VCC or GND
3.6
2.3
3.0
2.3
3.0
3.6
3.6
TA= -40 to +85°C
Min. Typ. Max.
0
2
-1.2
1.8
2.0
Units
V
V
V
0.8
9.0
6.5
10.0
6.5
V
±1.0
µA
±1.0
13.0
9.0
15.0
9.0
1
µA
µA
10
µA

Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
www.fairchildsemi.com
3
Typical values are at VCC=3.3V and TA= +25°C.
Symbol
Parameter
Conditions
TA=-40 to+85°C
Min.
Typ.
Max.
VCC
3.0 to 3.6
5.5
2.3 to 2.7
3.0 to 3.6
7
4
2.3 to 2.7
5
Units
Figure
ns
Figure 8,
Figure 10
ns
Figure 8,
Figure 10
tON
Turn On Time
S to Bus A
VB=2V
tOFF
Turn Off Time
S to Bus A
VB=2V
DG
Differential Gain
RL=75, f=3.58MHz
3.0 to 3.6
0.2
%
DP
Differential Phase
RL=75, f=3.58MHz
3.0 to 3.6
0.1
°
3.0 to 3.6
-45
2.3 to 2.7
-45
3.0 to 3.6
-70
OIRR
XTALK
BW
Non-Adjacent
Off Isolation
RL=75, f=30MHz
Adjacent
Off Isolation
Non-Adjacent
Channel Crosstalk
RL=75, f=30MHz
Adjacent Channel
Crosstalk
RL=50
-3dB Bandwidth
RL=75
dB
Figure 13
Figure 15
dB
2.3 to 2.7
3.0 to 3.6
-70
Figure 14
550
MHz
Figure 12
Typ.
Units
Figure
3
15
4
pF
pF
pF
Figure 17
Figure 16
300
Capacitance
Typical values are at VCC= 3.3V and TA=+25°C.
Symbol
CIN
CON
COFF
Parameter
Control Pin Input Capacitance
A/B On Capacitance
Port B Off Capacitance
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
Conditions
VCC=0V
VCC=3.0V=0V
VCC=3.3V
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
AC Electrical Characteristics
www.fairchildsemi.com
4
Figure 4.
Gain vs. Frequency (VBAIS=0.5V, VCC=3.6V, RL=50
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
Typical Characteristics
Figure 5. Off Isolation (VBAIS=0.5V, VCC=3. 0V, SELn=LOW
Figure 6.
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
Crosstalk (VBAIS=0.5V, VCC=3. 0V, SELn=HIGH
www.fairchildsemi.com
5
Figure 7.
Note:
4. RL and CL are functions of the application environment
(50, 75, or 100) CL includes test fixture and stray
capacitance.
Figure 8. Test Circuit Load
On Resistance
Figure 9. Off Leakage
Figure 10. Turn On / Off Waveforms
Figure 11.
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
Test Diagrams
On Leakage
www.fairchildsemi.com
6
Notes:
5. RS and RT are functions of the application environment (50, 75, or 100).
Figure 12. Bandwidth
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
Test Diagrams (Continued)
Notes:
6. RS and RT are functions of the application environment (50, 75, or 100).
7. Off isolation=20 Log (VOUT / VIN).
Figure 13.
Channel Off Isolation
Note:
8. Crosstalk=20 Log (VOUT / VIN).
Figure 14.
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
Adjacent Channel Crosstalk
www.fairchildsemi.com
7
Notes:
9. RS and RT are functions of the application environment (50, 75, or 100).
10. Crosstalk=20 Log (VOUT / VIN).
Figure 15. Non-Adjacent Channel-to-Channel Crosstalk
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
Figure 16.
Channel Off Capacitance
Figure 17.
Channel On Capacitance
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
Test Diagrams (Continued)
www.fairchildsemi.com
8
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
Physical Dimensions
Figure 18. 20-Lead, Thin Shrink Small Outline Package (TSSOP)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging.
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
www.fairchildsemi.com
9
FSAV433 — High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
© 2005 Fairchild Semiconductor Corporation
FSAV433 • Rev. 1.4.3
www.fairchildsemi.com
10