FAIRCHILD FDD6N50TM_10

FDD6N50TM_F085
500V N-Channel MOSFET
Features
Description
• 6A, 500V, RDS(on) = 0.9Ω @VGS = 10 V
These N-Channel enhancement mode power field effect
transistors are produced using Fairchild’s proprietary, planar
stripe, DMOS technology.
• Low gate charge ( typical 12.8 nC)
• Low Crss ( typical 9 pF)
This advanced technology has been especially tailored to
minimize on-state resistance, provide superior switching
performance, and withstand high energy pulse in the avalanche
and commutation mode. These devices are well suited for high
efficient switched mode power supplies and active power factor
correction.
• Fast switching
• 100% avalanche tested
• Improved dv/dt capability
• Qualified to AEC Q101
• RoHS Compliant
D
D
G
S
G
D-PAK
S
Absolute Maximum Ratings
Symbol
Parameter
VDSS
Drain-Source Voltage
ID
Drain Current
- Continuous (TC = 25°C)
- Continuous (TC = 100°C)
IDM
Drain Current
- Pulsed
VGSS
Gate-Source voltage
EAS
IAR
Ratings
Unit
500
V
6
3.8
A
A
24
A
±30
V
Single Pulsed Avalanche Energy
(Note 2)
270
mJ
Avalanche Current
(Note 1)
6
A
(Note 1)
EAR
Repetitive Avalanche Energy
(Note 1)
8.9
mJ
dv/dt
Peak Diode Recovery dv/dt
(Note 3)
4.5
V/ns
PD
Power Dissipation
89
0.71
W
W/°C
-55 to +150
°C
300
°C
(TC = 25°C)
- Derate above 25°C
TJ, TSTG
Operating and Storage Temperature Range
TL
Maximum Lead Temperature for Soldering Purpose,
1/8” from Case for 5 Seconds
Thermal Characteristics
Symbol
Parameter
Min.
Max.
Unit
RθJC
Thermal Resistance, Junction-to-Case
--
1.4
°C/W
RθJA
Thermal Resistance, Junction-to-Ambient
--
83
°C/W
©2010 Fairchild Semiconductor Corporation
FDD6N50TM_F085 Rev. C1
1
www.fairchildsemi.com
FDD6N50TM_F085 500V N-Channel MOSFET
November 2010
Device Marking
Device
FDD6N50
Reel Size
Tape Width
Quantity
D-PAK
380mm
16mm
2500
FDD6N50TM_F085
Electrical Characteristics
Symbol
Package
TC = 25°C unless otherwise noted
Parameter
Conditions
Min.
Typ.
Max Units
500
--
--
V
Off Characteristics
BVDSS
Drain-Source Breakdown Voltage
VGS = 0V, ID = 250µA
∆BVDSS
/ ∆TJ
Breakdown Voltage Temperature
Coefficient
ID = 250µA, Referenced to 25°C
--
0.5
--
V/°C
IDSS
Zero Gate Voltage Drain Current
VDS = 500V, VGS = 0V
VDS = 400V, TC = 125°C
---
---
1
10
µA
µA
IGSSF
Gate-Body Leakage Current, Forward
VGS = 30V, VDS = 0V
--
--
100
nA
IGSSR
Gate-Body Leakage Current, Reverse
VGS = -30V, VDS = 0V
--
--
-100
nA
3.0
--
5.0
V
--
0.76
0.9
Ω
--
2.5
--
S
On Characteristics
VGS(th)
Gate Threshold Voltage
VDS = VGS, ID = 250µA
RDS(on)
Static Drain-Source
On-Resistance
VGS = 10V, ID = 3A
gFS
Forward Transconductance
VDS = 40V, ID = 3A
(Note 4)
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
VDS = 25V, VGS = 0V,
f = 1.0MHz
--
720
940
pF
--
95
190
pF
--
9
13.5
pF
Switching Characteristics
td(on)
Turn-On Delay Time
tr
Turn-On Rise Time
td(off)
Turn-Off Delay Time
tf
Turn-Off Fall Time
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
VDD = 250V, ID = 6A
RG = 25Ω
(Note 4, 5)
VDS = 400V, ID = 6A
VGS = 10V
(Note 4, 5)
--
6
20
ns
--
55
120
ns
--
25
60
ns
--
35
80
ns
--
12.8
16.6
nC
--
3.7
--
nC
--
5.8
--
nC
--
--
6
A
Drain-Source Diode Characteristics and Maximum Ratings
IS
Maximum Continuous Drain-Source Diode Forward Current
ISM
Maximum Pulsed Drain-Source Diode Forward Current
--
--
24
A
VSD
Drain-Source Diode Forward Voltage
VGS = 0V, IS = 6A
--
--
1.4
V
trr
Reverse Recovery Time
275
--
ns
Reverse Recovery Charge
VGS = 0V, IS = 6A
dIF/dt =100A/µs
--
Qrr
--
1.7
--
µC
(Note 4)
NOTES:
1. Repetitive Rating: Pulse width limited by maximum junction temperature
2. IAS = 6A, VDD = 50V, L=13.5mH, RG = 25Ω, Starting TJ = 25°C
3. ISD ≤ 6A, di/dt ≤ 200A/µs, VDD ≤ BVDSS, Starting TJ = 25°C
4. Pulse Test: Pulse width ≤ 300µs, Duty Cycle ≤ 2%
5. Essentially Independent of Operating Temperature Typical Characteristics
FDD6N50TM_F085 Rev. C1
2
www.fairchildsemi.com
FDD6N50TM_F085 500V N-Channel MOSFET
Package Marking and Ordering Information
Figure 1. On-Region Characteristics
Top :
ID, Drain Current [A]
15
Bottom :
VGS
10.0 V
8.0V
7.5 V
7.0 V
6.5 V
6.0 V
5.5 V
5.0 V
1
10
ID , Drain Current [A]
20
Figure 2. Transfer Characteristics
10
∝ Notes :
1. 250レs Pulse Test
2. TC = 25∩
5
0
0
10
20
30
40
150∩
0
10
25∩
-55∩
-1
10
∝ Note
1. VDS = 40V
2. 250レs Pulse Test
-2
50
10
2
VDS, Drain-Source Voltage [V]
8
10
Figure 4. Body Diode Forward Voltage
Variation vs. Source Current
and Temperature
2.5
IDR , Reverse Drain Current [A]
RDS(ON) [ヘ ],Drain-Source On-Resistance
6
VGS , Gate-Source Voltage [V]
Figure 3. On-Resistance Variation vs.
Drain Current and Gate Voltage
2.0
VGS = 10V
1.5
VGS = 20V
1.0
0.5
1
10
0
10
150∩
25∩
∝ Notes :
1. VGS = 0V
2. 250レs Pulse Test
∝ Note : TJ = 25∩
0.0
-1
0
5
10
15
10
20
0.2
Figure 5. Capacitance Characteristics
VGS, Gate-Source Voltage [V]
Crss
∝ Notes :
1. VGS = 0 V
2. f = 1 MHz
10
10
1.4
1.6
1.8
VDS = 400V
8
6
4
2
∝ Note : ID = 6A
0
5
10
15
QG, Total Gate Charge [nC]
VDS, Drain-Source Voltage [V]
FDD6N50TM_F085 Rev. C1
1.2
VDS = 250V
10
0
1
10
1.0
VDS = 100V
Coss
0
0.8
12
Ciss
100
0.6
Figure 6. Gate Charge Characteristics
Ciss = Cgs + Cgd (Cds = shorted)
Coss = Cds + Cgd
Crss = Cgd
1000
0.4
VSD , Source-Drain Voltage [V]
ID, Drain Current [A]
Capacitance [pF]
4
3
www.fairchildsemi.com
FDD6N50TM_F085 500V N-Channel MOSFET
Typical Performance Characteristics
Figure 7. Breakdown Voltage Variation
vs. Temperature
Figure 8. On-Resistance Variation
vs. Temperature
3.0
RDS(ON), (Normalized)
Drain-Source On-Resistance
BVDSS, (Normalized)
Drain-Source Breakdown Voltage
1.2
1.1
1.0
♦ Notes :
0.9
1. VGS = 0 V
2. ID = 250 µA
0.8
-100
-50
0
50
100
150
2.5
2.0
1.5
1.0
♦ Notes :
0.5
1. VGS = 10 V
2. ID = 3 A
0.0
-100
200
TJ, Junction Temperature [ C]
2
50
100
150
200
o
TJ, Junction Temperature [ C]
Figure 9. Maximum Safe Operating Area
10
0
-50
o
Figure 10. Maximum Drain Current
vs. Case Temperature
8
Operation in This Area
is Limited by R DS(on)
6
100 us
ID, Drain Current [A]
ID, Drain Current [A]
10 us
1
10
1 ms
10 ms
DC
0
10
∝ Notes :
-1
10
o
1. TC = 25 C
4
2
o
2. TJ = 150 C
3. Single Pulse
-2
10
0
1
10
2
10
0
25
3
10
10
50
VDS, Drain-Source Voltage [V]
75
100
125
150
TC, Case Temperature [∩ ]
Figure 11. Transient Thermal Response Curve
Zヨ JC(t), Thermal Response
10
0
D = 0 .5
0 .2
∝ N o te s :
1 . Z ヨ J C(t) = 1 .4 ∩ /W M a x.
2 . D u ty F a c to r, D = t 1 /t 2
3 . T JM - T C = P D M * Z ヨ J C(t)
0 .1
10
-1
0 .0 5
0 .0 2
PDM
0 .0 1
t1
s in g le p u ls e
10
t2
-2
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t 1 , S q u a re W a v e P u ls e D u ra tio n [s e c ]
FDD6N50TM_F085 Rev. C1
4
www.fairchildsemi.com
FDD6N50TM_F085 500V N-Channel MOSFET
Typical Performance Characteristics (Continued)
FDD6N50TM_F085 500V N-Channel MOSFET
Gate Charge Test Circuit & Waveform
Resistive Switching Test Circuit & Waveforms
Unclamped Inductive Switching Test Circuit & Waveforms
FDD6N50TM_F085 Rev. C1
5
www.fairchildsemi.com
FDD6N50TM_F085 500V N-Channel MOSFET
Peak Diode Recovery dv/dt Test Circuit & Waveforms
FDD6N50TM_F085 Rev. C1
6
www.fairchildsemi.com
FDD6N50TM_F085 500V N-Channel MOSFET
Mechanical Dimensions
D-PAK
Dimensions in Millimeters
FDD6N50TM_F085 Rev. C1
7
www.fairchildsemi.com
AccuPower™
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax™
ESBC™
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MicroPak2™
MillerDrive™
MotionMax™
Motion-SPM™
OptoHiT™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SignalWise™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
®
*
The Power Franchise®
TinyBoost™
TinyBuck™
TinyCalc™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
μSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I48
FDD6N50TM_F085 Rev. C1
8
www.fairchildsemi.com
FDD6N50TM_F085 500V N-Channel MOSFET
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.