UNISONIC TECHNOLOGIES CO., LTD UK2996 MOSFET 600V SILICON N-CHANNEL POWER MOSFET 1 DESCRIPTION The UK2996 is an N-channel enhancement mode field-effect power transistor. Intended for use in high voltage, high speed switching applications in power supplies, DC-DC converter, relay drive and PWM motor drive controls. 1 TO-220F FEATURES * Fast Switching Times * Improved Inductive Ruggedness * High Forward Transfer Admittance * Low on Resistance * Low Leakage Current * Lower Input Capacitance TO-220 1 TO-220F1 SYMBOL 1 TO-220F2 ORDERING INFORMATION Ordering Number Lead Free Halogen Free UK2996L-TA3-T UK2996G-TA3-T UK2996L-TF1-T UK2996G-TF1-T UK2996L-TF2-T UK2996G-TF2-T UK2996L-TF3-T UK2996G-TF3-T Note: Pin Assignment: G: Gate D: Drain S: Source www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package TO-220 TO-220F1 TO-220F2 TO-220F Pin Assignment 1 2 3 G D S G D S G D S G D S Packing Tube Tube Tube Tube 1 of 6 QW-R502-063.C UK2996 MOSFET ABSOLUTE MAXIMUM RATING PARAMETER Drain to Source Voltage Continuous Drain Current Pulsed Drain Current Drain to Gate Voltage (RGS = 20 kΩ) Gate to Source Voltage Avalanche Current Single Pulsed Avalanche energy (Note 2) Repetitive Avalanche Energy (Note 3) Power Dissipation (TC = 25°C) SYMBOL VDSS ID IDM RATINGS 600 10 30 VDGR VGSS IAR 600 ±30 10 252 4.5 45 36 38 +150 EAS EAR TO-220 TO-220F/TO-220F1 TO-220F2 Junction Temperature PD TJ UNIT V A A V V A mJ mJ W °C °C Storage Temperature TSTG -55 ~ +150 Note 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. L = 4.41 mH, IAR = 10 A, VDD = 90 V, RG = 25 Ω, starting TJ = 25°C. 3. Pulse width and frequency is limited by TJ. THERMAL DATA CHARACTERISTICS Channel to Ambient TO-220 Channel to Case TO-220F/TO-220F1 TO-220F2 SYMBOL θJA θJC RATINGS 62.5 2.78 3.47 3.29 UNIT °C / W °C / W ELECTRICAL CHARACTERISTICS (TA = 25°C) PARAMETER Gate−Source Breakdown Voltage Drain−Source Breakdown Voltage Gate Threshold Voltage Gate Source Leakage Current Drain Source Leakage Current Static Drain−Source ON Resistance Forward Transconductance Input Capacitance Reverse Transfer Capacitance Output Capacitance Total Gate Charge Gate−Source Charge Gate−Drain Charge Turn-on Delay Time Turn-on Rise Time Turn−off Delay Time SYMBOL BVGSS BVDSS VGS(TH) IGSS IDSS RDS (ON) gFS CISS CRSS COSS QG QGS QGD tON tR tOFF TEST CONDITIONS VDS = 0V, IG = ±10µA VGS = 0V, ID = 10mA VDS = 10V, ID = 1mA VGS = ±25V, VDS = 0V VDS = 600V, VGS = 0V VGS = 10V, ID = 5A VDS = 10V, ID = 5A VDS = 20V, VGS = 0V, f = 1MHz ID = 10A, VDD ≈ 400V, VGS = 10V MIN TYP MAX ±30 600 2.0 4.0 ±10 100 0.74 1. 0 3.4 6.8 1500 13 140 38 21 17 55 15 145 Switching Time UNIT V V V µA µA Ω S pF nC ns Turn-off Fall Time tF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 27 2 of 6 QW-R502-063.C UK2996 MOSFET SOURCE−DRAIN DIODE CHARACTERISTICS (TA = 25°C) PARAMETER SYMBOL TEST CONDITIONS Diode Forward Voltage VSD VGS = 0V, IS = 10A Continuous Source Current (body diode) IS Integral Reverse p-n Junction Diode in the MOSFET Drain Pulse Source Current (body diode) MIN TYP MAX UNIT -1.7 V 10 A ISM 30 A Gate Source Reverse Recovery Time Reverse Recovery Charge tRR QRR VGS = 0V, IS = 10A, dIF/dt = 100 A/µs UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 1600 17 ns µC 3 of 6 QW-R502-063.C UK2996 MOSFET TEST CIRCUIT AND WAVE FORM LL VDS BVDSS IAR ID RG DUT +15V -15V ID (t) VDD VDS (t) VDD tP UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw tP Time 4 of 6 QW-R502-063.C UK2996 MOSFET TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-063.C UK2996 MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-063.C