UNISONIC TECHNOLOGIES CO., LTD V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT FAMILY OF LOW-POWER RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS SOP-8 DESCRIPTION The UTC V2462/2464 are dual/quad low-power rail-to-rail input/output op amplifiers with low supply current (500uA/op) and low voltage (2.7-6V), that can be designed into a wide range of applications. The UTC V2462/2464 have a guaranteed 1.6 V/µs slew rate and low supply current. rail-to-rail output and high output current make the ICS ideal for buffering analog-to-digital converters. And the input common-mode voltage range including ground and VDD. Besides, they are also able to driving large capacitive loads. Good ac performance can be provided because of 6.4MHz of bandwidth and 1.6 V/μs of slew rate. Furthermore, low input noise voltage (11nV/√Hz) and low input offset voltage (100μV) make good DC performance. SOP-14 FEATURES * Rail-to-Rail Output Swing * Gain Bandwidth Product 6.4 MHz * ±80mA Output Drive Capability * Supply Current 500μA/channel * Input Offset Voltage 100μV * Input Noise Voltage 11nV/√Hz MSOP-8 * Slew Rate 1.6V/μs * Universal Operational Amplifier EVM * Available in Q-Temp Automotive * HighRel Automotive Applications Configuration Control/Print Support Qualification to Automotive Standards ORDERING INFORMATION Ordering Number Lead Free Halogen Free V2462L-S08-R V2462G-S08-R V2462L-S08-T V2462G-S08-T V2462L-SM1-R V2462G-SM1-R V2462L-SM1-T V2462G-SM1-T V2464L-S14-R V2464G-S14-R V2464L-S14-T V2464G-S14-T www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package Packing SOP-8 SOP-8 MSOP-8 MSOP-8 SOP-14 SOP-14 Tape Reel Tube Tape Reel Tube Tape Reel Tube 1 of 8 QW-R105-042.b V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT PIN CONFIGURATION V2462 1OUT 1 8 VDD+ 1IN- 2 7 2OUT 1IN+ 3 6 2IN- GND 4 5 2IN+ V2464 1OUT 1 14 4OUT 1IN- 2 13 4IN- 1IN+ 3 12 4IN+ VDD+ 4 11 GND 2IN+ 5 10 3IN+ 2IN- 6 9 3IN- 2OUT 7 8 3OUT PIN DESCRIPTION UTC V2462: PIN NO. PIN NAME 1 1OUT 2 1IN3 1IN+ 4 GND 5 2IN+ 6 2IN7 2OUT 8 VDD+ Output terminal of CH1 Negative input terminal of CH1 Positive input terminal of CH1 Ground Positive input terminal of CH2 Negative input terminal of CH2 Output terminal of CH2 Supply voltage terminal UTC V2464: PIN NO. PIN NAME 1 1OUT 2 1IN3 1IN+ 4 VDD+ 5 2IN+ 6 2IN7 2OUT 8 3OUT 9 3IN10 3IN+ 11 GND 12 4IN+ 13 4IN14 4OUT Output terminal of CH1 Negative input terminal of CH1 Positive input terminal of CH1 Supply voltage terminal Positive input terminal of CH2 Negative input terminal of CH2 Output terminal of CH2 Output terminal of CH3 Negative input terminal of CH3 Positive input terminal of CH3 Ground Positive input terminal of CH4 Negative input terminal of CH4 Output terminal of CH4 DESCRIPTION DESCRIPTION UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 8 QW-R105-042.b V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT BLOCK DIAGRAM V2462 1OUT 1 8 VDD+ OP1 1IN- 2 - (Internal Simple Circuit) 7 2OUT + OP2 1IN+ 3 GND 6 2IN- 5 2IN+ - + (Internal Simple Circuit) 4 V2464 1OUT 1 1IN- 2 14 4OUT OP1 OP4 (Internal Simple Circuit) (Internal Simple Circuit) + + 13 4IN- 1IN+ 3 12 4IN+ VDD+ 4 11 GND 2IN+ 5 10 3IN+ OP2 + 2IN- 6 2OUT 7 (Internal Simple Circuit) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw + OP3 (Internal Simple Circuit) 9 3IN- 8 3OUT 3 of 8 QW-R105-042.b V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT BLOCK DIAGRAM(Cont.) Internal simple circuit (one channel): UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 8 QW-R105-042.b V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified) PARAMETER Supply Voltage (Note 1) Differential Input Voltage Output Current RATINGS UNIT 6 V -0.2~VDD+0.2 V ±175 mA 710 SOP-8/MSOP-8 TA ≤ 25 °C SOP-14 1022 Power Dissipation mW PD SOP-8/MSOP-8 142 TA < 125 °C SOP-14 204.4 Operating Free-Air Temperature TA -40~125 °C Junction Temperature TJ 150 °C Storage Temperature TSTG -60~150 °C Notes: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 1. All voltage values, except differential voltages, are with respect to GND. SYMBOL VDD VID IO THERMAL DATA PARAMETER Junction to Ambient Junction to Case SYMBOL SOP-8/MSOP-8 SOP-14 SOP-8/MSOP-8 SOP-14 θJA θJC UNIT °C/W °C/W °C/W °C/W RATINGS 2.7 ~ 6 ±1.35 ~ ±3 0 ~ VDD -40 ~ 125 UNIT V V V °C RECOMMENDED OPWRAING CONDITIONS PARAMETER Supply Voltage SYMBOL Single supply Split supply VDD Common-Mode Input Voltage VICR Operating Free-Air Temperature TA Note: 1. Relative to voltage on the GND terminal of the device. RATINGS 176 122.6 38.3 26.9 ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) VDD=3V PARAMETER SYMBOL Input Offset Voltage VIO Input Offset Current IIO Input Bias Current IIB High-Level Output Voltage Low-Level Output Voltage Short-Circuit Output Current VOH VOL IOS TEST CONDITIONS TA=25°C VDD=3V, VIC=1.5V, VO=1.5V, RS=50Ω (Note 1) TA=25°C (Note 1) VDD=3V, VIC=1.5V, VO=1.5V, RS=50Ω TA=25°C (Note 1) TA=25°C IOH= -2.5mA (Note 1) TA=25°C IOH=-10mA (Note 1) TA=25°C VIC=1.5V, IOL=2.5mA (Note 1) TA=25°C VIC=1.5V, IOL=10mA (Note 1) TA=25°C Sourcing (Note 1) TA=25°C Sinking (Note 1) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 500 2.8 4.4 MAX 2000 2200 7 75 14 75 UNIT μV nA nA 2.9 2.8 V 2.7 2.5 0.1 0.2 0.3 V 0.5 50 20 40 mA 20 5 of 8 QW-R105-042.b V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) PARAMETER Output Current Large-Signal Differential Voltage Amplification Differential Input Resistance Common-Mode Input Capacitance Closed-Loop Output Impedance Common-Mode Rejection Ratio Supply Voltage (∆VDD/∆VIO) Rejection SYMBOL IO AVD rI(D) CI(C) ZO CMRR Ratio Supply Current (Per Channels) Note: 1. TA= -40°C~125°C. VDD=5V PARAMETER kSVR IDD SYMBOL Input Offset Voltage VIO Input Offset Current IIO Input Bias Current IIB High-Level Output Voltage Low-Level Output Voltage VOH VOL Short-Circuit Output Current IOS Output Current Large-Signal Differential Voltage Amplification Differential Input Resistance Common-Mode Input Capacitance Closed-Loop Output Impedance IO Common-Mode Rejection Ratio AVD rI(D) CI(C) ZO CMRR Supply Voltage Rejection Ratio (∆VDD/∆VIO) kSVR Supply Current (Per Channels) IDD TEST CONDITIONS Measured 1V form rail, TA=25°C TA=25°C RL=10kΩ, VO(PP)=1V (Note 1) TA=25°C f=10kHz, TA=25°C f=100kHz, AV=10, TA=25°C TA=25°C VICR=0~3V, RS=50Ω (Note 1) TA=25°C VDD=2.7~6V, VIC=VDD/2, No load (Note 1) TA=25°C VDD=3~5V, VIC=VDD/2, No load (Note 1) TA=25°C VO=1.5V, No load (Note 1) MIN TEST CONDITIONS TA=25°C VDD=5V, VIC=2.5V, VO=2.5V, RS=50Ω (Note 1) TA=25°C VDD=5V, VIC=2.5V, VO=2.5V, RS=50Ω (Note 1) TA=25°C (Note 1) TA=25°C IOH=-2.5mA (Note 1) TA=25°C IOH=-10mA (Note 1) TA=25°C VIC=2.5V, IOL=2.5mA (Note 1) TA=25°C VIC=2.5V, IOL=10mA (Note 1) TA=25°C Sourcing (Note 1) TA=25°C Sinking (Note 1) Measured 1V form rail VIC=2.5V, RL=10kΩ, TA=25°C VO=1~4V (Note 1) TA=25°C f=10kHz, TA=25°C f=100kHz, AV=10, TA=25°C TA=25°C VICR=0~5V, RS=50Ω (Note 1) TA=25°C VDD=2.7~6V, VIC=VDD/2, No load (Note 1) TA=25°C VDD=3~5V, VIC=VDD/2, No load (Note 1) TA=25°C VO=2.5V, No load (Note 1) MIN 90 89 66 60 80 75 85 80 TYP ±40 105 MAX UNIT mA dB 109 7 33 80 Ω pF Ω dB 85 dB 95 0.5 0.575 0.9 TYP 500 MAX 2000 2200 7 60 14 60 0.3 1.3 mA UNIT μV nA nA 4.9 4.8 V 4.8 4.7 0.1 0.2 0.2 V 0.3 145 60 mA 100 60 92 90 71 60 80 75 85 80 ±48 109 mA 109 7 29 85 Ω pF Ω dB dB 85 dB 95 0.55 0.65 1 mA Note: 1. TA= -40°C~125°C. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 8 QW-R105-042.b V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT OPWERAING CHARACTERISTICS (TA=25°C, unless otherwise specified) VDD=3V PARAMETER SYMBOL Slew Rate at Unity Gain SR Equivalent Input Noise Voltage VN Equivalent Input Noise Current IN Total Harmonic Distortion Plus Noise THD+N Gain-Bandwidth Product Setting Time tS Phase Margin at Unity Gain Gain Margin Note: 1. TA=-40°C~125°C. VDD=5V PARAMETER φM SYMBOL Slew Rate at Unity Gain SR Equivalent Input Noise Voltage VN Equivalent Input Noise Current IN Total Harmonic Distortion Plus Noise THD+N Gain-Bandwidth Product Setting Time tS Phase Margin at Unity Gain Gain Margin Note: 1. TA= -40°C~125°C. φM TEST CONDITIONS VO(PP)=0.8V, RL=10kΩ, TA=25°C CL=160pF (Note 1) f=100Hz f=1kHz TYP 1.6 MAX UNIT V/μs 16 11 nV/ Hz f=1kHz 0.13 pA/ Hz AV=1 AV=10 AV=100 f=10 kHz, CL=160pF, RL=10kΩ V(STEP)PP=2V,RL=10kΩ, 0.1% AV= -1, CL=10pF 0.01% V(STEP)PP=2V,RL=10kΩ 0.1% AV= -1, CL=56pF, 0.01% 0.006 0.02 0.08 5.2 1.47 1.78 1.77 1.98 44° 7 VO(PP)=2V, RL=10kΩ, f=1kHz RL=10kΩ, CL=160pF TEST CONDITIONS VO(PP)=2V,CL=160pF, TA=25°C RL=10 kΩ (Note 1) f=100Hz f=1kHz MIN 0.9 0.8 TYP 1.6 % MHz μs dB MAX UNIT V/μs 14 11 nV/ Hz f=1kHz 0.13 pA/ Hz AV=1 AV=10 AV=100 f=10 kHz, CL=160pF, RL=10kΩ V(STEP)PP=2V,RL=10kΩ, 0.1% AV= -1, CL=10pF 0.01% V(STEP)PP=2V,RL=10kΩ, 0.1% AV= -1, CL=56pF 0.01% 0.004 0.01 0.04 6.4 1.53 1.83 3.13 3.33 45° 7 VO(PP)=4V, RL=10kΩ, f=1kHz RL=10kΩ, CL=160pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 0.9 0.8 % MHz μs dB 7 of 8 QW-R105-042.b V2462/V2464 Preliminary LINEAR INTEGRATED CIRCUIT TYPICAL APPLICATION CIRCUIT UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 8 QW-R105-042.b