C1300 PXO Typical Applications Features Military Systems Avionics and Instrumentation Test Equipment Medical Equipment 9X14 J Leaded Surface Mount Package Reflow Process Compatible ACMOS, TTL, LVPECL and LVDS MIL-PRF-55310 Class B Screening (optional) Military Operating Temperature Range (optional) Frequency Range 1 to 800 MHz (ACMOS and TTL outputs available up to 125 MHz. LVPECL and LVDS output frequencies above 220 MHz are achieved through the use of a PLL multiplier.) Standard Frequencies 1 Frequency Stabilities 19.44, 32.768, 44.736, 51.84, 77.76, 155.52, 622.08 MHz Parameter Min Operating temperature range (referenced to +25°C) -100 -50 -25 -15 -100 -50 -25 -100 -50 -15 -25 -50 -100 Initial accuracy (do not use with overall tolerance code below) Parameter Overall tolerance (includes operating temperature and initial accuracy) Max Units Condition +100 +50 +25 +15 +100 +50 +25 +100 +50 +15 +25 +50 +100 ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm 0 … +70°C 0 … +70°C 0 … +70°C 0 … +70°C -40 … +85°C -40 … +85°C -40 … +85°C -55 … +125°C -55 … +125°C @ 25°C @ 25°C @ 25°C @ 25°C Max Units Condition -100 -50 +100 +50 ppm ppm 0 … +70°C 0 … +70°C -25 -20 -100 -50 -25 -100 -65 +25 +20 +100 +50 +25 +100 +65 ppm ppm ppm ppm ppm ppm ppm 0 … +70°C 0 … +70°C -40 … +85°C -40 … +85°C -40 … +85°C -55 … +125°C -55 … +125°C -2 -1 -3 -1 +2 +1 +3 +1 ppm ppm ppm ppm VS ± 5% Load ± 5% Condition Min 7 Additional stability parameters: vs. Supply voltage change vs. Load change vs. Aging / 1st year vs. Aging / year (following years) Typ Typ 5 Ordering Code C104 C505 C255 C155 F104 F505 F255 M104 M505 T155 T255 T505 T104 5 Ordering Code TC104 TC505 TC255 TC205 TF104 TF505 TF255 TM104 TM605 Supply Voltage (Vs) Parameter Min Typ Max Units Supply voltage Current consumption (+5 VDC) 4.75 5.0 Supply voltage Supply voltage Current consumption (+3.3 VDC or +2.5 VDC) 3.135 2.375 3.3 2.5 5.25 15 20 40 3.465 2.625 6 8 12 16 40 75 VDC mA mA mA VDC VDC mA mA mA mA mA mA Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax 5 Ordering Code SV050 ACMOS or TTL 1.0 to 23.9 MHZ ACMOS or TTL 24 to 49.9 MHz ACMOS or TTL 50 to 125.00 MHz SV033 SV025 ACMOS 1.0 to 14.90 MHZ ACMOS 15.0 to 39.9 MHz ACMOS 40.0 to 59.9 MHz ACMOS 60.0 to 84.9 MHz ACMOS 85.0 to 125.0 MHz LVPECL or LVDS No load <200 MHz v.2009-09-15-05 · page 1 of 4 SEM Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax C1300 100 PXO mA LVPECL or LVDS No load >200 MHz RF Output Parameter Signal Min Typ Max Units Condition ACMOS Load 15 Signal Level (Vol) Signal Level (Voh) 50 pF 0.5 0.3 0.25 VDC VDC VDC VDC VDC VDC ns ns ns % % Vs= 5.0V and 15pF load Vs=3.3V and 15pF load Vs=2.5V and 15pF load Vs= 5.0V and 15pF load Vs=3.3V and 15pF load Vs=2.5V and 15pF load 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0MHz @ 50% Vs< 15 MHz @ 50% Vs > 15 MHz RFT 0.5 VDC Vs= 5.0V and 15pF load 5 3 55 60 VDC ns ns % % Vs= 5.0V and 15pF load 1.0 to 23.9 MHz 24 to 125 MHz @ 1.4V < 15 MHz @ 1.4V > 15 MHz RFP Into Vcc-2V or Thevenin Equivalent -40 … +85°C operating temp -40 … +85°C operating temp <100 MHz > 100 MHz @ 50% Vdd BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz 10,000 Samples - Rising edge RFL Between outputs 4.5 3.0 2.25 Rise and fall times for ACMOS (measured 10% to 90%) Duty cycle 10 6 3 55 60 45 40 Signal Load Ordering Code5 RFA TTL 10 Signal Level (Vol) Signal Level (Voh) Rise and fall times for TTL (measured 0.8V to 2.0V) Duty Cycle 4.5 45 40 Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times (measured @ 20% to 80%) Duty cycle LVPECL Jitter (rms) LVPECL 50 Vs -1.62 Vs- 1.025 1000 600 55 10 0.5 40 45 Period Jitter (pk-pk) Signal Load Signal Level (Vol) Ω VDC VDC ps ps % ps ps ps LVDS 60 Signal Level (Voh) Differential Voltage (Vod) Common Mode (Offset) Voltage (Vos) Start-up Time Rise and fall times Duty cycle Jitter (rms) 240 1.125 100 1.2 1.4 330 1.2 600 45 Period Jitter (pk-pk) 140 460 1.375 10 1000 55 5 1 40 Ω VDC VDC mVpeak V mS ps % ps ps ps measured @ 20% to 80% of Vod @ 50% of Vod BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz 10,000 Samples - Rising edge Additional Parameters Screening Screening 6 Output Enable Weight Processing & Packing 9 V Vectron Verification Class B, MIL-PRF-55310, Rev.D B Logic "0" input = Outputs disabled (Tri-state) Standard for ACMOS, TTL and LVDS outputs Logic "1" or floating input = Outputs enabled) Logic "0" or floating input = Outputs enabled Standard for LVPECL output Logic "1" input = Outputs disabled (Tri-state) < 2 grams Handling & processing note Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2009-09-15-05 · page 2 of 4 SEM Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax C1300 PXO Standard Environmentals Parameter Vibration Shock Acceleration Temperature Cycling Thermal Shock Solderability Leak Test (Fine and Gross) Test Condition MIL-STD-202, Method 204, Condition G (30 G, 10Hz-2000Hz) MIL-STD-202, Method 213, Condition I (100 G, 6ms, Sawtooth) MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane) MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 107, Condition B MIL-STD-202, Method 208 MIL-STD-883, Method 1014, Condition A1 and C1 Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Operable temperature range Storage temperature range -55 -62 Typ Enclosures Type A – ACMOS or TTL Package Codes: Codes A1 = 4 leads E1 = Enable/Disable pin 1 X = N/C pin 1 T= Tinned J leads X= No Tinning Height 0.188 max (4.77) Stand-off 0.043 max (1.09) 8 Max 7.0 7.0 +125 +125 Units V V °C °C Condition Vs=5.0VDC Vs=3.3VDC Type B – LVPECL or LVDS Codes B1 = 6 leads E1 = Enable/Disable pin 1 E2 = Enable/Disable pin 2 X = N/C pin 1 and pin 2 T= Tinned J leads X = No Tinning 3 – RF Output 4 – Supply Voltage Pin Connections 1 – Enable/Disable or N/C 2 – N/C 3 – Ground (Case) 4 – RF Output 5 – Complementary Output 6 – Supply Voltage Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Stand-off 0.043 max (1.09) 8 Pin Connections 1 – Enable/Disable or N/C 2 – Ground (case) Height 0.188 max (4.77) v.2009-09-15-05 · page 3 of 4 SEM Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax C1300 How to Order this Product: Step 1 10 Use this worksheet to forward the following information to your factory representative (example follows): Model Stability Code C1300 C505 Step 2 PXO Initial Accuracy Supply Voltage RF Output Code Code Code (if required) T505 SV033 RFA Screening Code Package Code V A1 Enable/Disable Code Tinning Code E1 T The factory representative will then respond with a Vectron Part Number in the following configuration: Model Package Code Dash Dash Number C1300 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N C1300A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all RF outputs and frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. 6 Contact factory for other options. 7 Overall stabilities do not require an initial accuracy code. 8 Leads tinned IAW Vectron International standard procedure (GR-37409). 9 Vectron Verification IAW Vectron International standard process (HK-69314). 10 Please be sure to specify nominal frequency. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2009-09-15-05 · page 4 of 4 SEM Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120 +86 21 28909740 tel. +86 21 28909240 fax