PX-508 Clock Oscillator Low G-Sensitivity PX-508 Features Applications Low G-Sensitivity Vibration hardened Tight Tolerances Low Phase Noise • • • • Vibration Environment Airborne and Military Equipment Portable Equipment Tactical Weapons Performance Specifications2 Frequency Stabilities1 (Frequency Range - 10 to 120 MHz) Parameter Min vs. operating temperature range (referenced to +25°C) Initial tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging / 10 years Typical Max Units -15.0 -25.0 -40.0 +15.0 +25.0 +40.0 ppm ppm ppm -10.0 -3.0 -2.0 -1.0 -5.0 +10.0 +3.0 +2.0 +1.0 +5.0 ppm ppm ppm ppm ppm Condition -20 to +70°C -40 to +85°C -55 to +105°C 25°C VS ±5% static Load ±10% static after 30 days of operation after 30 days of operation Page 1 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Options4 • • • • Performance Specifications2 Supply Voltage (Vs) Min Typical Max Units Condition Supply voltage (standard) Current consumption 3.135 3.3 3.465 30 VDC mA @LVCMOS Supply voltage Current consumption 4.75 5.0 5.25 40 VDC mA @HCMOS Option4 Parameter RF Output Signal [standard] LVCMOS/HCMOS Load 13.5 15 Signal Level (Vol) LVCMOS Signal Level (Voh) LVCMOS 16.5 pF 0.3 VDC @ Vs=3.3V and 15pF Load VDC @ Vs=3.3V and 15pF Load 3.0 Signal Level (Vol) HCMOS 0.5 Signal Level (Voh) HCMOS 4.5 Duty Cycle 40 VDC @ Vs=5.0V and 15pF Load @ Vs=5.0V and 15pF Load Rise and Fall time 60 % @ (Voh-Vol)/2 5 ns @15 pF 10 to 90 % Additional Parameters Phase Noise3 -100 -128 -143 -153 -155 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz Jitter 0.101 ps RMS @ 12 kHz to 20 MHz Phase Noise3 -90 -122 -142 -148 -155 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz Jitter 0.062 ps RMS @ 12 kHz to 20 MHz Weight 8.0 Processing & Packing @ 77.76 MHz LVCMOS 3.3 V @ 120 MHz LVCMOS 3.3 V g Handling & Processing Note Additional Environmental Conditions Random Vibration MIL-STD-202G; Method 214A; Condition II-J 1g2/Hz / 43.92 grms guaranteed (Qualification testing performed at MIL-STD-202G; Method 214A; Condition II-K, 1.5g2/Hz / 53.79 grms) MIL-STD-883; Method 2007 Test Condition B 50 g (Qualification testing performed at MILSTD-883; Method 2007; Test Condition C 70 g) MIL-STD-883G; Method 2002.4; Condition D 5000 g / 0.3 ms higher values on request Sine Vibration Shock JEDEC J-STD-002 100% RoHS 6 compliant Solderability Solvent Resistance non-washable device Absolute Maximum Ratings supply voltage (Vs) Output Load 6.0 V 50 pF Operable Temperature Range -55 +105 °C Storage Temperature Range -55 +105 °C Page 2 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure PX-508 Height “H” Pin Length “L” 6.2 NA Pin Connections 1 N/C 2 N/C 3 N/C / Enable (optional) 4 Ground (Case) 5 NC 6 NC 7 RF-Output 8 NC 9 Supply Voltage (Vs) 10 NC Enable true table (optional) Pin 3 Pin 7 High Data Open Data Low High Tristate Dimensions in mm Typical Phase Noise @ 120 MHz HCMOS Typical Phasenoise: PX-508 @ 120MHz -70 -80 -90 Phase Noise [dBc/Hz] -100 -110 -120 -130 -140 -150 -160 -170 10 100 1000 10000 100000 Offset Frequency [Hz] Page 3 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com 1000000 Typical G-Sensitivity @120 MHz; HCMOS Vibration spectrum G-Sensitivity: PX-508; 120MHz; 0,06g2/Hz 1,00 0,1 X-Axis Y-Axis Z-Axis 0,90 Total 0,70 0,01 PSD [g /Hz] 0,60 2 G-Sensitivity [ppb/g] 0,80 0,50 0,40 0,001 0,30 0,20 0,10 0,0001 0,00 10 100 1.000 10.000 10 100 1.000 Frequency [Hz] Phase noise: PX-508; 120MHz; 0,06g2/Hz Calculation equation according to Vig-Tutorial -60 g-sensitivity: X-Axis Y-Axis Z-Axis -70 Phase Noise [dBc/Hz] 10.000 Frequency [Hz] Peak g-level: -80 G= 2 ⋅ fv ⋅10 Apeak ⋅ f 0 L ( fv ) 20 Apeak = PSD ⋅ 2 Oscillator -90 Y Z -100 X -110 -120 10 100 1.000 10.000 Offset Frequency [Hz] Typical Frequency Stability vs Temperature Frequency vs. temperature -20°C to +70°C Frequency vs. temperature -40°C to +85°C 25,0 15,0 20,0 10,0 15,0 10,0 df [ppm] df [ppm] 5,0 0,0 -5,0 5,0 0,0 -5,0 -10,0 -15,0 -10,0 -20,0 -15,0 -25,0 -20 -10 0 10 20 30 Temperature [°C] 40 50 60 70 -40 -30 -20 -10 0 10 20 30 Temperature [°C] Page 4 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com 40 50 60 70 80 Standard Shipping Method (PX-508) Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B Gurtunterseite Tape buttom side K P Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Enclosure Type Tape Width W (mm) Quantity per meter Quantity per reel Dimension P G301 24 83,3 850 12 Recommended Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (TL to TP) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. 150°C 200°C 60-180 seconds Time maintained above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Preheat -Temperature Min TSmin -Temperature Min TSmax -Time (min to max) tS TSmax to TL -Ramp-up Rate 3°C/second max Time maintained above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Time within 5°C of actual Peak Temperature (tP) 20-40 seconds Peak Temperature (TP) max 260°C Ramp-down Rate 6°C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. Page 5 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information PX - 508 Product Family PX: XO 0 - E A E - 405 X - 10M0000000 Frequency Package Low G-Sensitivity SMD version: 508 Frequency Control X: NA Height 0: 6.2 mm Stability Code J-155: ±15 ppm E-255: ±25 ppm B-405: ±40 ppm Supply Voltage D: 5V E: 3.3V RF Output Code A: LVCMOS / HCMOS Temperature Range J: -20°C to +70°C E: -40°C to +85°C B: -55°C to +105°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Contact factory for availability. Subject to technical modification. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 7268.801.100 Fax: +49 (0) 7268.801.282 Vectron International 1589 Century Avenue, the 19th Floor Chamtime International Financial Center Shanghai, China Tel: 86.21.6081.2888 Fax: 86.21.6163.3598 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 06/2011 Page 6 of 6 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com