VECTRON TFS150

Filename: tfs 150.doc
Version 1.2
VI TELEFILTER
11.11.2005
Filter specification
TFS 150
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance:
Input:
Output:
23
0
°C
dBm
930 Ω || -1,6 pF
930 Ω || -1,6 pF
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 150 is the maximum attenuation in the pass band. The maximum attenuation in the pass
band is defined as the insertion loss ae. The nominal frequency fN is fixed at MHz without any tolerance or limit. The values of relative attenuation arel are
guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production
tolerance scheme.
Data
typ. value
ae= amax
Insertion loss
(reference level)
2,8
Nominal frequency
fN
-
Passband
PB
-
dB
Relative attenuation
fN
+
910
dB
max.
fN
±
5
dB
150,05
kHz
10
kHz
BW
Bandwidth
3
tolerance / limit
kHz
Operating temperature range
OTR
Storage temperature range
kHz
65
dB
min.
TCf *
60
-
- 20 °C ... + 70 °C
-
- 30 °C ... + 75 °C
+ 30 °C
Frequency inversion temperature
Temperature coefficient of frequency
107
arel
- 0,036
dB
ppm/K
2
-
*) ∆f(Hz) = TCf(ppm/K2) x (T-T0)2 x fTo(MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 150.doc
Version 1.2
VI TELEFILTER
11.11.2005
Filter specification
Filter characteristic
truction
and pin connection
0
TFS 150
2/5
0
200
-10
-20
-5
-30
magnitude in dB
magnitude in dB
100
-40
-50
-60
-10
-15
0
-70
-80
-20
-90
-100
149.2
149.4
149.6
149.8
150
150.2
frequency in MHz
150.4
150.6
150.8
151
-25
149.9
149.95
150
150.05
frequency in MHz
150.1
150.15
-100
Construction and pin connection
(All dimensions in mm)
1
2
3
4
5
6
7
8
9
10
TFS 150
● T45
Ground
Output
Ground
Ground
Ground
Ground
Input
Ground
Ground
Ground
Date code:
T
U
V
...
Year + week
2005
2006
2007
50 Ω Test circuit
7
2
1, 3, 4, 5, 6, 8, 9, 10
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 150.doc
Version 1.2
VI TELEFILTER
11.11.2005
Filter specification
TFS 150
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
2000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
Tape (all dimensions in mm)
W
: 16,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,10
F
: 7,50 ± 0,10
G(min)
: 0,60
P2
: 2,00 ± 0,1
P1
: 12,00 ± 0,1
D1(min)
: 1,50 +0,1/-0
Ao
: 7,60 ± 0,10
Bo
: 9,60 ± 0,10
Ct
: 13,5
t
P1
Date Code
Po
P2
W
G
Ct
Bo
F
G
E
Do
Ko
Typ
PIN Marker
D1
Ao
W 2
A
C
N
W 1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 150.doc
Version 1.2
VI TELEFILTER
11.11.2005
Filter specification
TFS 150
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 150.doc
VI TELEFILTER
Version 1.2
Filter specification
11.11.2005
TFS 150
5/5
History
Version
Reason of Changes
Name
Date
1.2
- Add history, add filter characteristic
Channaa
11.11.2005
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.