VECTRON TFS1880_05

Filename: tfs1880.doc
Version 1.4
VI TELEFILTER
22.02.2005
Filter specification
TFS 1880
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedances
for input:
for output:
23 °C
0 dBm
50 Ω
50 Ω
Characteristics
Remark:
The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1880 MHz without any tolerance or limit.
The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating
temperature range is included in the production tolerance scheme.
Data
typ. value
Insertion loss
(reference level)
ae
Nominal frequency
fN
Centre frequency
fC
Passband
PB
10
MHz …
1930
MHz …
1935
MHz …
2032
MHz …
2340
MHz …
2700
MHz …
VSWR within PB
1720
1935
1990
2340
2700
3500
dB
max.
5
1880
1880
80,5
Pass band ripple
Absolute attenuation
3,4
tolerance / limit
dB
MHz
MHz
MHz
fN
0,6
dB
max.
±
30
3,5
dB
MHz
33
17
41
41
37
12
2,5
dB
dB
dB
dB
dB
dB
min.
min.
min.
min.
min.
min.
max.
30
13
20
35
30
10
3,0 : 1
dB
dB
dB
dB
dB
dB
max.
13
dBm
aabs
MHz
MHz
MHz
MHz
MHz
MHz
Input power level
Operating temperature range
OTR
Storage temperature range
Temperature coefficient of frequency
-
- 10 °C ... + 70°C
TCf **
-36
- 40 °C ... + 85°C
ppm/K
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values
only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs1880.doc
Version 1.4
VI TELEFILTER
22.02.2005
Filter specification
TFS 1880
2/5
0
0
-10
-1
-20
-2
-30
-3
-40
-50
-60
-5
-6
-7
-80
-8
-90
-9
384
758
1132
1506 1880 2254
frequency in MHz
2628
3002
3376
6
-4
-70
-100
10
9
VSWR
magnitude in dB
m agnitude in dB
Filter characteristic
3
0
-10
1830 1840 1850 1860 1870 1880 1890 1900 1910 1920 1930
frequency in MHz
3750
Construction and pin configuration
(All dimensions in mm)
5
6
4
Date code: Year+week
1,2 Max.
T06
S02
3
Data Code
0,1
1
3
0,75
1,5
3 ±0,15
2
1
0,6
6
S
T
U
V
...
2004
2005
2006
2007
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Ground
Input
Ground
Ground
Output
Ground
4
0,6
50 Ω Test circuit
L1
2
5
L2
SAW
1, 3, 4, 6
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs1880.doc
Version 1.4
VI TELEFILTER
22.02.2005
Filter specification
TFS 1880
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
9000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
Tape (all dimensions in mm)
W
: 8,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 3,50 ± 0,05
G(min)
: 0,75
P2
: 2,00 ± 0,05
P1
: 4,00 ± 0,1
D1(min)
: 1,50
Ao
: 3,25 ± 0,1
Bo
: 3,25 ± 0,1
Ct
: 5,5 ± 0,1
P1
t
Po
PIN Marker
P2
W
G
Ct
Bo
F
G
E
Do
Ko
Date Code
Typ
D1
Ao
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 8,4 +1,5/-0
W2(max) : 14,4
N(min)
: 50
C
: 13,0 +0,5/-0,2
A
C
N
W 1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs1880.doc
Version 1.4
VI TELEFILTER
22.02.2005
Filter specification
TFS 1880
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs1880.doc
VI TELEFILTER
Version 1.4
Filter specification
22.02.2005
TFS 1880
5/5
History
Version
Reason of Changes
Name
Date
1.0
Generation of development specification
Dr. Sabah
17.12.2003
1.1
Change of formula for temperature coefficient of frequency,
add of value of temperature coefficient of frequency
Roizengaft
22.12.2003
1.2
Add of typical values
Dr. Sabah
08.01.2004
1.3.
Generation of filter specification
Strehl
09.02.2005
1.4.
adjust upper stopband requirements
VSWR corrected
Steiner
22.02.2005
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.