RN 14 Series Insulation Coated Metal Film Resistors
The content of this specification may change without notification 1/01/06
Custom solutions are available.
HOW TO ORDER:
RN14
S
2E
100K
B
M
Packaging
M = Tape ammo pack (1,000 pcs)
B = Bulk (100 pcs)
Resistance Tolerance
C = +0.25%
B = + 0.1%
D = +0.5%
F = +1.0%
Resistance Value
FEATURES
e.g. 100K, 62R2, 30K1
Ultra Stability of Resistance Value
Voltage
2B = 1/8W, 2E = 1/4W, 2H = 1/2W
Extremely Low temperature coefficient of
resistance, +5ppm
Temperature Coefficient
E = +25ppm
R = +5ppm
S = +10ppm
C = +50ppm
Working Temperature of -55°C ~ +150°C
Series
Precision Insulation Coated Metal
Film Fixed Resistor
ISO 9002 Quality Certified
Applicable Specifications: EIA575, JISC5202,
and IEC 60068
STANDARD ELECTRICAL SPECIFICATION
Type
Rated Watts*
Max. Working
Voltage
Max. Overload
Voltage
RN14 2B
0.125
250
500
RN14 2E
0.25
350
700
RN14 2H
0.50
500
1000
TCR
ppm/°C
+5, +10, +25
+25, +50
+5, +10, +25
+25, +50
+5, +10, +25
+25, +50
Tolerance (%)
+0.1
+0.25, +0.5, +1
+0.1
+0.25, +0.5, +1
+0.1
+0.25, +0.5, +1
Resistance
Range
Operating
Temp Range
10 Ω – 1MΩ
10 Ω – 1MΩ
- 55{C to + 150{C
10 Ω – 1MΩ
* per element @ 85{C
DIMENSIONS (mm)
L
6.3 + 0.5
9.0 + 0.5
14.2 + 0.8
Test Item
D
2.3 + 0.2
3.6 + 0.5
4.8 + 0.4
C
7.5
10.5
16.0
l
27 + 2
27 + 2
27 + 2
d
0.6 + 0.05
0.6 + 0.05
1.0 + 0.05
JISC5202
Test Result
Value
5.1
B (+0.1%)
TRC
5.2
S (+10ppm/{C)
Short Time Overload
5.5
+ (0.25% + 0.05Ω)
Insulation
5.6
10,000M Ω
Voltage
5.7
+ (0.1% + 0.05Ω)
Intermittent Overload
5.8
+ (0.5% + 0.05Ω)
Terminal Strength
6.1
+ (0.25% + 0.05Ω)
Vibration
6.3
+ (0.25% + 0.05Ω)
Solder Heat
6.4
+ (0.25% + 0.05Ω)
Solderability
6.5
95%
Solvency
6.9
Anti-Solvent
Temperature Cycle
7.4
+ (0.25% + 0.05Ω)
Low Temp Operation
7.1
+ (0.25% + 0.05Ω)
Humidity Overload
7.9
+ (0.25% + 0.05Ω)
Rated Load Test
7.10
+ (0.25% + 0.05Ω)
E
l
Type
RN14 2B
RN14 2E
RN14 2H
Mechanic
RESISTOR DRAWING
Other
DERATING CURVE
MATERIAL SPECIFICATION
Element:
Encapsulation:
Core:
Termination:
Precision deposited nickel chrome alloy
Coated constructions
Specially formulated epoxy compounds
Standard lead material is solder coated
copper with controlled annealing
Fire cleaned high purity ceramic
Solderable and weldable per MIL-STD1276, Type C
PERFORMANCE
American Accurate Components, Inc.
188 Technology Drive, Unit H, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889
1